Dear Tom 2009/9/23 Tom <tom....@windriver.com>: > Minkyu Kang wrote: >> Adds new board SMDKC100 that uses s5pc100 SoC >> >> Signed-off-by: Minkyu Kang <mk7.k...@samsung.com> >> Signed-off-by: HeungJun, Kim <riverful....@samsung.com> >> --- >> Changes since v1: >> - arrange env values for more readable >> - make C struct instead of base+offset >> - use MACH_TYPE_SMDKC100 directly >> - fix the CONFIG_SYS_HZ to 1000 >> - enable LOADB, LOADS, BOOTD, XIMG, FPGA >> >> Changes since v2: >> - remove <asm/sizes.h> and SZ_XX defines >> - remove the define of machine type >> - remove the unnecessary comment >> >> MAINTAINERS | 4 + >> MAKEALL | 1 + >> Makefile | 3 + >> board/samsung/smdkc100/Makefile | 55 +++++++ >> board/samsung/smdkc100/config.mk | 16 ++ >> board/samsung/smdkc100/lowlevel_init.S | 215 ++++++++++++++++++++++++++++ >> board/samsung/smdkc100/mem_setup.S | 197 ++++++++++++++++++++++++++ >> board/samsung/smdkc100/onenand.c | 83 +++++++++++ >> board/samsung/smdkc100/smdkc100.c | 51 +++++++ >> include/configs/smdkc100.h | 242 >> ++++++++++++++++++++++++++++++++ >> 10 files changed, 867 insertions(+), 0 deletions(-) >> create mode 100644 board/samsung/smdkc100/Makefile >> create mode 100644 board/samsung/smdkc100/config.mk >> create mode 100644 board/samsung/smdkc100/lowlevel_init.S >> create mode 100644 board/samsung/smdkc100/mem_setup.S >> create mode 100644 board/samsung/smdkc100/onenand.c >> create mode 100644 board/samsung/smdkc100/smdkc100.c >> create mode 100644 include/configs/smdkc100.h >> > > Please include a brief readme doc/README.s5pc1xx similar to README.omap
ok I will. > > <snip> > >> + >> +#ifndef CONFIG_ONENAND_IPL >> + /* setting SRAM */ >> + ldr r0, =S5PC100_SROMC_BASE >> + ldr r1, =0x9 >> + str r1, [r0] >> +#endif > > Where is CONFIG_ONENAND_IPL defined ? > If it is not being used, the #ifndef logic should be reduced. Kyungmin Park sent the patch that is supported onenand_ipl for s5pc1xx. but not yet applied onenand_ipl patch for s5pc1xx. When that patch is applied, we need these logic. If necessary, I'll delete these logic until apply the patch. > > Tom > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > Thanks Minkyu Kang -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
