On Mon, Jul 11, 2016 at 10:15 PM, Andreas Färber <afaer...@suse.de> wrote: > Am 11.07.2016 um 21:48 schrieb Beniamino Galvani: >> On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote: >>> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber <afaer...@suse.de> wrote: >>>> Last output: >>>> >>>> NOTICE: BL3-1: v1.0(debug):4d2e34d >>>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 >>>> INFO: BL3-1: Initializing runtime services >>>> INFO: BL3-1: Preparing for EL3 exit to normal world >>>> INFO: BL3-1: Next image address = 0x1000000 >>>> INFO: BL3-1: Next image spsr = 0x3c9 >>>> >>>> I.e., no U-Boot SPL output on serial. >>> >>> I see similar on Pine64 with 2016.07rc3 >> >> Here the first non-booting commit is: >> >> commit d73718f3236c520a92efa401084c658e6cc067f3 >> Author: Mingkai Hu <mingkai...@nxp.com> >> Date: Thu Jul 7 12:22:12 2016 +0800 >> >> armv8: Enable CPUECTLR.SMPEN for coherency > > Thanks! With that reverted I get: > > [...] > NOTICE: BL3-1: v1.0(debug):4d2e34d > NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 > INFO: BL3-1: Initializing runtime services > INFO: BL3-1: Preparing for EL3 exit to normal world > INFO: BL3-1: Next image address = 0x1000000 > INFO: BL3-1: Next image spsr = 0x3c9 > No match for driver 'eth_designware' > Some drivers were not found > > > U-Boot 2016.07-00001-g10a9e48 (Jul 11 2016 - 21:58:13 +0200) odroid-c2 > > DRAM: 2 GiB > No maUsing default environment > > In: serial@4c0 > Out: serial@4c0 > Err: serial@4c0 > Net: No ethernet found. > => > > The eth_designware line (twice, if counting "No ma") is due to what Tom > mentioned wrt DM GPIO, I guess. > > Shouldn't we get a version line from SPL, too? A serial driver issue?
AFAIKT there is no SPL. U-Boot is loaded by BL3-1 also in the U-Boot shipped by amlogic. -- Carlo Caione _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
