Hi, Am 08.05.2016 um 08:30 schrieb Beniamino Galvani: > this series adds a very basic support for Amlogic S905 SoC (GXBaby) > and for the ODROID-C2 board [1], and is based on u-boot sources > available from the board vendor [2]. At the moment the only supported > devices are the integrated UART and Ethernet adapter.
On current master with these four patches merged, should I expect to see any output after BL31? o.O Note that the README is outdated in that Hardkernel now has sources for fip_create and no binary any more. I've verified that the behavior is the same when using the binary and the self-compiled tool. Last output: NOTICE: BL3-1: v1.0(debug):4d2e34d NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9 I.e., no U-Boot SPL output on serial. Regards, Andreas P.S. The upstream arm-trusted-firmware fip_create tool doesn't know about --bl30 and --bl301 btw, anyone any insights? -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
