Am 11.07.2016 um 21:48 schrieb Beniamino Galvani: > On Mon, Jul 11, 2016 at 05:23:15AM +0100, Peter Robinson wrote: >> On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber <afaer...@suse.de> wrote: >>> Last output: >>> >>> NOTICE: BL3-1: v1.0(debug):4d2e34d >>> NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 >>> INFO: BL3-1: Initializing runtime services >>> INFO: BL3-1: Preparing for EL3 exit to normal world >>> INFO: BL3-1: Next image address = 0x1000000 >>> INFO: BL3-1: Next image spsr = 0x3c9 >>> >>> I.e., no U-Boot SPL output on serial. >> >> I see similar on Pine64 with 2016.07rc3 > > Here the first non-booting commit is: > > commit d73718f3236c520a92efa401084c658e6cc067f3 > Author: Mingkai Hu <mingkai...@nxp.com> > Date: Thu Jul 7 12:22:12 2016 +0800 > > armv8: Enable CPUECTLR.SMPEN for coherency
Thanks! With that reverted I get: [...] NOTICE: BL3-1: v1.0(debug):4d2e34d NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9 No match for driver 'eth_designware' Some drivers were not found U-Boot 2016.07-00001-g10a9e48 (Jul 11 2016 - 21:58:13 +0200) odroid-c2 DRAM: 2 GiB No maUsing default environment In: serial@4c0 Out: serial@4c0 Err: serial@4c0 Net: No ethernet found. => The eth_designware line (twice, if counting "No ma") is due to what Tom mentioned wrt DM GPIO, I guess. Shouldn't we get a version line from SPL, too? A serial driver issue? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
