On Mon, Jul 11, 2016 at 4:57 AM, Andreas Färber <afaer...@suse.de> wrote: > Hi, > > Am 08.05.2016 um 08:30 schrieb Beniamino Galvani: >> this series adds a very basic support for Amlogic S905 SoC (GXBaby) >> and for the ODROID-C2 board [1], and is based on u-boot sources >> available from the board vendor [2]. At the moment the only supported >> devices are the integrated UART and Ethernet adapter. > > On current master with these four patches merged, should I expect to see > any output after BL31? o.O > > Note that the README is outdated in that Hardkernel now has sources for > fip_create and no binary any more. I've verified that the behavior is > the same when using the binary and the self-compiled tool. Last output: > > NOTICE: BL3-1: v1.0(debug):4d2e34d > NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015 > INFO: BL3-1: Initializing runtime services > INFO: BL3-1: Preparing for EL3 exit to normal world > INFO: BL3-1: Next image address = 0x1000000 > INFO: BL3-1: Next image spsr = 0x3c9 > > I.e., no U-Boot SPL output on serial.
I see similar on Pine64 with 2016.07rc3 > P.S. The upstream arm-trusted-firmware fip_create tool doesn't know > about --bl30 and --bl301 btw, anyone any insights? If you find details on the upstream ATF support I'd love a link for more details _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
