Hello Michal,
Yours is the basis. I need to modify it.
Please see the files in the attachment.
Thanks,
Marco

________________________________________
Von: Michal Simek <michal.si...@xilinx.com>
Gesendet: Dienstag, 17. November 2015 11:23
An: Hoefle Marco; Michal Simek; Jagan Teki
Cc: u-boot@lists.denx.de; emanuel stiebler
Betreff: Re: AW: AW: AW: AW: [U-Boot] u-boot device model SPI + SPI Flash

Hi,

On 17.11.2015 11:17, Hoefle Marco wrote:
> Hello Michal, hello Jagan,
> for me the Microblaze SPI port in mainline u-boot does not work with DM.
> I used Michal's files and modified the addresses and changed Full Ethernet to 
> Ethernet lite and uart to uartlite to match the hardware here. This was not a 
> big step as both Hardware configurations are very similar.
> The changes between v2016.01-rc1 and the changed/added files are attached as 
> patch.
>
> Still the same error:
> U-Boot 
> 2016.01--95f642905f8dd7c07ac9f5ed49fe14291ab1fb15---00002-g95f6429-dirty (Nov 
> 17 2015 - 10:57:55 +0100)
>
> DRAM:  256 MiB
> Invalid bus 0 (err=-19)
> *** Warning - spi_flash_probe() failed, using default environment

is this u-boot with my DTB or yours? It is not visible if this is dtb
which you use in your config. Definitely check that dtb you use setup
aliases.

Thanks,
Michal


Attachment: microblaze-generic.dts
Description: microblaze-generic.dts

Attachment: pl.dtsi
Description: pl.dtsi

Attachment: system-conf.dtsi
Description: system-conf.dtsi

Attachment: system-top.dts
Description: system-top.dts

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to