Hi, On 17.11.2015 11:17, Hoefle Marco wrote: > Hello Michal, hello Jagan, > for me the Microblaze SPI port in mainline u-boot does not work with DM. > I used Michal's files and modified the addresses and changed Full Ethernet to > Ethernet lite and uart to uartlite to match the hardware here. This was not a > big step as both Hardware configurations are very similar. > The changes between v2016.01-rc1 and the changed/added files are attached as > patch. > > Still the same error: > U-Boot > 2016.01--95f642905f8dd7c07ac9f5ed49fe14291ab1fb15---00002-g95f6429-dirty (Nov > 17 2015 - 10:57:55 +0100) > > DRAM: 256 MiB > Invalid bus 0 (err=-19) > *** Warning - spi_flash_probe() failed, using default environment
is this u-boot with my DTB or yours? It is not visible if this is dtb which you use in your config. Definitely check that dtb you use setup aliases. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
