Hello Michal, I saw a change on this file drivers/mtd/spi/sf-uclass.c regarding the dm problem. I replaced this file on mainline u-boot but the result is the same. Is there anything else to change? I looked at your here: https://github.com/Xilinx/u-boot-xlnx/commits/master/drivers/spi
Thanks, Marco ________________________________________ Von: Michal Simek <michal.si...@xilinx.com> Gesendet: Donnerstag, 29. Oktober 2015 09:22 An: Hoefle Marco; Michal Simek; Jagan Teki Cc: u-boot@lists.denx.de; emanuel stiebler Betreff: Re: AW: [U-Boot] u-boot device model SPI + SPI Flash Hi, On 10/27/2015 04:03 PM, Hoefle Marco wrote: > Hello Michal, > ok I will then stop trying to get SPI working on mainline and watch your > commits on > https://github.com/Xilinx/u-boot-xlnx > > We have a custom Artix Board here and I would be happy to test your commits > on our hardware. I have sent patches to mainline mailing list and also update xilinx tree. petalinux bsp which uses this configuration should be out at the end of Nov. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot