From: Dirk Eibach <dirk.eib...@gdsys.cc> mvebu gpio is based on kirkwood.
Signed-off-by: Dirk Eibach <dirk.eib...@gdsys.cc> --- arch/arm/mach-mvebu/include/mach/gpio.h | 41 +++++++++++++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h index 09e3c50..cd869ee 100644 --- a/arch/arm/mach-mvebu/include/mach/gpio.h +++ b/arch/arm/mach-mvebu/include/mach/gpio.h @@ -1,10 +1,47 @@ /* - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Based on (mostly copied from) plat-orion based Linux 2.6 kernel driver. + * Removed kernel level irq handling. Took some macros from kernel to + * allow build. + * + * Dieter Kiermaier dk-arm-li...@gmx.de */ #ifndef __MACH_MVEBU_GPIO_H #define __MACH_MVEBU_GPIO_H -/* Empty file - sdhci requires this. */ +/* got from kernel include/linux/bitops.h */ +#define BITS_PER_BYTE 8 +#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) + +#define GPIO_MAX 59 +#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000) +#define GPIO_OUT(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00) +#define GPIO_IO_CONF(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04) +#define GPIO_BLINK_EN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08) +#define GPIO_IN_POL(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) +#define GPIO_DATA_IN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10) +#define GPIO_EDGE_CAUSE(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14) +#define GPIO_EDGE_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18) +#define GPIO_LEVEL_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c) + +/* + * Kirkwood-specific GPIO API + */ + +void kw_gpio_set_valid(unsigned pin, int mode); +int kw_gpio_is_valid(unsigned pin, int mode); +int kw_gpio_direction_input(unsigned pin); +int kw_gpio_direction_output(unsigned pin, int value); +int kw_gpio_get_value(unsigned pin); +void kw_gpio_set_value(unsigned pin, int value); +void kw_gpio_set_blink(unsigned pin, int blink); +void kw_gpio_set_unused(unsigned pin); + +#define GPIO_INPUT_OK (1 << 0) +#define GPIO_OUTPUT_OK (1 << 1) #endif -- 2.1.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
