2015-11-18 14:23 GMT+01:00 Anton Schubert <anton.schub...@gmx.de>:
> Am 18.11.2015 um 13:48 schrieb Dirk Eibach:
>> I assume the idea is to go to the next port if the current port is
>> disabled. But adding 3 to the index does not seem to be the right
>> thing to do, since Armada XP has ports with 4 lanes, but also with
>> ports with one lane.
>> I assume that iterating over all lanes would not be a problem, but by
>> mistake the pcie->lane == 0 was left in the condition.
> Yeah you are right. The additional condition was superfluous in the
> original version.
>
>> So this should perform better:
>>
>> /* Don't read at all from pci registers if port power is down */
>> if (SELECT(soc_ctrl, pcie->port) == 0) {
>> if (pcie->lane == 0)
>> debug("%s: skipping port %d\n", __func__, pcie->port);
>> continue;
>> }
> I agree.
Fine. I will add this to the v1 series.
Cheers
Dirk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
