Hello Simon,
On 08/31/2015 03:22 PM, Simon Glass wrote:
Hi Przemyslaw,
On 28 August 2015 at 07:59, Przemyslaw Marczak <p.marc...@samsung.com> wrote:
This patchset adds:
- define the CPU name for Chromebook Peach Pi as Exynos5800
- set the cpu id of Exynos5422 to 0x5422
- S2MPS11 PMIC I/O driver
- Exynos5420-compatible (9-channel, 12-bit) ADC driver
- board detection for Odroid XU3 / XU3lite / XU4
This was tested on Odroid XU3 and XU3 Lite, without the XU4,
but I'm waiting for reply from the Odroid forum users.
Tested with buildman for samsung.
Available on github:
https://github.com/bobenstein/u-boot/tree/xu3-patchset-test
Przemyslaw Marczak (7):
s5p: cpu_info: use defined CPU name if available
peach-pi: define CPU name for SoC Exynos5800
Exynos5422/5800: set cpu id to 0x5422
dm: pmic: add s2mps11 PMIC I/O driver
odroid-xu3: enable s2mps11 PMIC support
Exynos: add internal ADC driver
exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.
It's nice to have things automatic. Is this easier than having a
separate device tree for each board?
Regards
Simon
In my intention was using a single U-Boot binary (u-boot-dtb.bin) with
the three almost full compatible boards.
This is also easier for other developers, who don't need care about few
configs and few dtb's.
And finally this code can load proper dtb for Linux Kernel for each
supported board. So in the next part (Linux boot), things are done clean.
The common board file is quite messy because of this code, so if you
don't like it, then I can move it to independent file.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
