There are few revisions of Odroid XU3/XU4:
Rev ADC Board
0.1 0 XU3 0.1
0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
0.3 739 XU4 0.1
This commit adds implementation of functions:
- set_board_type() - read ADC and set type
- get_board_rev() - returns board revision: 1..3
- board_is_odroidxu3() - returns bool
- board_is_odroidxu4() - returns bool
- get_board_type() - returns board type string
After I2C controller init, the last function can check
if the board is "Lite" variant for XU3, by probing chip
0x40 on I2C0 (INA231 - exists only on non-lite).
This is useful for setting fdt file name at misc_init_r().
The enabled configs:
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- CONFIG_ODROID_REV_AIN
- CONFIG_REVISION_TAG
- CONFIG_MISC_INIT_R
- CONFIG_BOARD_TYPES
This also redefines CONFIG_SYS_BOARD to "odroid".
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
board/samsung/common/exynos5-dt.c | 114 ++++++++++++++++++++++++++++++++++++++
include/configs/odroid_xu3.h | 12 ++++
2 files changed, 126 insertions(+)
diff --git a/board/samsung/common/exynos5-dt.c
b/board/samsung/common/exynos5-dt.c
index 7d1b88a..41141df 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -18,6 +18,7 @@
#include <usb.h>
#include <video_bridge.h>
#include <asm/gpio.h>
+#include <asm/arch/adc.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/mmc.h>
@@ -28,6 +29,7 @@
#include <power/max77686_pmic.h>
#include <power/regulator.h>
#include <power/s5m8767.h>
+#include <power/s2mps11.h>
#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -360,3 +362,115 @@ char *get_dfu_alt_boot(char *interface, char *devstr)
return alt_boot;
}
#endif
+
+#ifdef CONFIG_REVISION_TAG
+/**
+ * Odroix XU3/4 board revisions:
+ * Rev ADC Board
+ * 0.1 0 XU3 0.1
+ * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
+ * 0.3 739 XU4 0.1
+ * Use +/-20 for ADC value tolerance.
+ */
+enum {
+ ODROID_XU3_REV01,
+ ODROID_XU3_REV02,
+ ODROID_XU4_REV01,
+ ODROID_UNKNOWN_REV,
+ ODROID_REV_COUNT,
+};
+
+struct odroid_type {
+ int board_type;
+ int rev;
+ int adc_val;
+ const char *name;
+};
+
+struct odroid_type odroid_type[] = {
+ { ODROID_XU3_REV01, 1, 0, "xu3" },
+ { ODROID_XU3_REV02, 2, 372, "xu3" },
+ { ODROID_XU4_REV01, 1, 739, "xu4" },
+ { ODROID_UNKNOWN_REV, 0, 4095, "unknown" },
+};
+
+bool board_is_odroidxu3(void)
+{
+ if (gd->board_type < ODROID_XU4_REV01)
+ return true;
+
+ return false;
+}
+
+bool board_is_odroidxu4(void)
+{
+ if (gd->board_type > ODROID_XU3_REV02)
+ return true;
+
+ return false;
+}
+
+int set_board_type(void)
+{
+ int adcval, i;
+
+ adcval = exynos_adc_read_channel(CONFIG_ODROID_REV_AIN);
+ if (adcval < 0)
+ return adcval;
+
+ for (i = 0; i < ODROID_REV_COUNT; i++) {
+ /* ADC tolerance: +20 */
+ if (adcval < odroid_type[i].adc_val + 20) {
+ gd->board_type = i;
+ return i;
+ }
+ }
+
+ return ODROID_UNKNOWN_REV;
+}
+
+int get_board_rev(void)
+{
+ return odroid_type[gd->board_type].rev;
+}
+
+/**
+ * get_board_type - returns pointer to one of the board type string.
+ * Board types: "xu3", "xu3-lite", "xu4". However the "xu3itel" can be
+ * detected only when the i2c controller is ready to use. Fortunately,
+ * XU3 and XU3L are compatible, and the information about board lite
+ * revision is needed before boot linux, to set proper environment
+ * variable: $fdtfile.
+ */
+const char *get_board_type(void)
+{
+ const char *type_xu3l = "xu3-lite";
+ struct udevice *dev, *chip;
+ int ret;
+
+ if (gd->board_type != ODROID_XU3_REV02)
+ goto exit;
+
+ ret = pmic_get("s2mps11", &dev);
+ if (ret)
+ goto exit;
+
+ /* Enable LDO26: 3.0V */
+ ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
+ S2MPS11_LDO26_ENABLE);
+ if (ret)
+ goto exit;
+
+ /* Check XU3Lite by probe INA231 I2C0:0x40 */
+ ret = uclass_get_device(UCLASS_I2C, 0, &dev);
+ if (ret)
+ goto exit;
+
+ ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
+ if (ret)
+ return type_xu3l;
+
+exit:
+ return odroid_type[gd->board_type].name;
+}
+#endif
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index 3c70158..648e48b 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -94,6 +94,8 @@
"boot.scr fat 0 1;" \
"boot.cmd fat 0 1;" \
"exynos5422-odroidxu3.dtb fat 0 1;" \
+ "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
+ "exynos5422-odroidxu4.dtb fat 0 1;" \
"boot part 0 1;" \
"root part 0 2\0"
@@ -113,9 +115,19 @@
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
#define CONFIG_MISC_COMMON
+#define CONFIG_MISC_INIT_R
#define CONFIG_SET_DFU_ALT_INFO
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
+/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_ODROID_REV_AIN 9
+#define CONFIG_REVISION_TAG
+#define CONFIG_BOARD_TYPES
+
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD "odroid"
+
/* Define new extra env settings, including DFU settings */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
