hi Przemyslaw,
On 28 August 2015 at 19:29, Przemyslaw Marczak <p.marc...@samsung.com>
wrote:
> This patchset adds:
> - define the CPU name for Chromebook Peach Pi as Exynos5800
> - set the cpu id of Exynos5422 to 0x5422
> - S2MPS11 PMIC I/O driver
> - Exynos5420-compatible (9-channel, 12-bit) ADC driver
> - board detection for Odroid XU3 / XU3lite / XU4
>
> This was tested on Odroid XU3 and XU3 Lite, without the XU4,
> but I'm waiting for reply from the Odroid forum users.
>
> Tested with buildman for samsung.
>
> Available on github:
> https://github.com/bobenstein/u-boot/tree/xu3-patchset-test
>
> Przemyslaw Marczak (7):
> s5p: cpu_info: use defined CPU name if available
> peach-pi: define CPU name for SoC Exynos5800
> Exynos5422/5800: set cpu id to 0x5422
> dm: pmic: add s2mps11 PMIC I/O driver
> odroid-xu3: enable s2mps11 PMIC support
> Exynos: add internal ADC driver
> exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.
>
> arch/arm/cpu/armv7/s5p-common/cpu_info.c | 5 ++
> arch/arm/dts/exynos5422-odroidxu3.dts | 7 ++
> arch/arm/mach-exynos/Makefile | 1 +
> arch/arm/mach-exynos/adc.c | 83 ++++++++++++++++++++++
> arch/arm/mach-exynos/clock.c | 16 ++---
> arch/arm/mach-exynos/clock_init_exynos5.c | 2 +-
> arch/arm/mach-exynos/common_setup.h | 4 +-
> arch/arm/mach-exynos/include/mach/adc.h | 45 ++++++++++++
> arch/arm/mach-exynos/include/mach/cpu.h | 10 +--
> arch/arm/mach-exynos/include/mach/gpio.h | 4 +-
> arch/arm/mach-exynos/pinmux.c | 2 +-
> arch/arm/mach-exynos/power.c | 2 +-
> board/samsung/common/exynos5-dt.c | 114
++++++++++++++++++++++++++++++
> configs/odroid-xu3_defconfig | 3 +
> doc/device-tree-bindings/pmic/s2mps11.txt | 17 +++++
> drivers/power/pmic/Kconfig | 14 ++++
> drivers/power/pmic/Makefile | 1 +
> drivers/power/pmic/s2mps11.c | 60 ++++++++++++++++
> include/configs/odroid_xu3.h | 12 ++++
> include/configs/peach-pi.h | 2 +
> include/power/s2mps11.h | 109
++++++++++++++++++++++++++++
> 21 files changed, 493 insertions(+), 20 deletions(-)
> create mode 100644 arch/arm/mach-exynos/adc.c
> create mode 100644 doc/device-tree-bindings/pmic/s2mps11.txt
> create mode 100644 drivers/power/pmic/s2mps11.c
> create mode 100644 include/power/s2mps11.h
>
Thanks for these patches.
👍
At the last moment I got this to work on my odroidxu3 board.
One problem I would like to address out is usb smsc95xx ethernet is not
getting started at the boot.
# usb start /* command failed at the start */
------------------------------------------------------------------------------------------------------
U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for
ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Model: xu3
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
starting USB...
USB0: USB EHCI 1.00
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
-----------------------------------------------------------------------------------------
I will give it a try with latest kernel and let you know how it worked on
Odroid-XU4 / XU4.
-Anand Moon
> --
> 1.9.1
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
