Hi Saket, On Thu, Jun 4, 2015 at 10:05 PM, Saket Sinha <saket.sinh...@gmail.com> wrote: > Hi Bin, > >> >> I've created two patches to include a D0 stepping microcode for >> BayTrail-I. The microcode was generated from the microcode header in >> the coreboot source tree. >> >> The first patch is waiting for the list moderator's approval as it >> exceeds the mailing list size. The second patch is at >> http://patchwork.ozlabs.org/patch/480673/ >> I will send the first patch to you offline. Please have a try. > > After applying both the patches, I am able to get the u-boot prompt > with u-boot.rom . > > Please find the logs below - > > U-Boot 2015.07-rc1-20956-g5d3c2c5-dirty (Jun 04 2015 - 19:27:32 +0530) > > CPU: x86_64, vendor Intel, device 30679h > DRAM: 2 GiB > MMC: ValleyView SDHCI: 0, ValleyView SDHCI: 1 > Using default environment > > Video: 1280x1024x16 > Model: Intel Minnowboard Max > SCSI: SATA link 0 timeout. > SATA link 1 timeout. > AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > flags: 64bit ncq stag pm led clo pio slum part sxs > scanning bus for devices... > Found 0 device(s). > Net: RTL8169#0 > Warning: RTL8169#0 using MAC address from net device > > => > > > Thanks for these wonderful patches. >
This is good news! I believe you can continue your work for the ACPI support now :) Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
