Hi John, On 3 June 2015 at 18:13, Bin Meng <bmeng...@gmail.com> wrote: > Hi, > > On Thu, Jun 4, 2015 at 5:44 AM, John Hawley <john.haw...@intel.com> wrote: >> Ok some more data points. I tested with the FSP3 Gold that Saket built, >> and it continues to work on the A0, but it continues to not work on the >> A2 D0 board I have. I'm guessing this is something between the >> steppings in the CPU and the FSP, but I'm not sure. >> >> Adding Vincent to this, as I'm guessing there is something going on here >> with the interaction with the FSP (since it works on an A0 B3, but not >> an A2 D0) >> >> - John >> >> On 06/03/2015 01:24 PM, Saket Sinha wrote: >>> Hi, >>> >>>> I'm 99% sure that's the issue. try with FSP 3 gold." >>>> >>>> I am now trying to build the u-boot.rom from FSP 3 gold and would let >>>> you know about the results ASAP. >>> >>> u-boot.rom prepared from FSP3-Gold dowmloaded from >>> https://downloadcenter.intel.com/download/24496 doesn't work with the >>> minnowmax I have. >>> >>> Regards, >>> Saket Sinha >>> > > Given even with Simon's debug UART WIP patch, the A2 D0 board still > has nothing output, I suspect that the FspTempRamInit() call failed > due to the microcode loading. Could it be the problem that the > microcode passed to the FSP is a little bit old that it does not > support the D0 stepping. Can you try some newer version microcode to > see if there is any luck?
I was using the Gold3 version. Is there a new microcode we could try? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
