Hi Bin, > > I've created two patches to include a D0 stepping microcode for > BayTrail-I. The microcode was generated from the microcode header in > the coreboot source tree. > > The first patch is waiting for the list moderator's approval as it > exceeds the mailing list size. The second patch is at > http://patchwork.ozlabs.org/patch/480673/ > I will send the first patch to you offline. Please have a try.
After applying both the patches, I am able to get the u-boot prompt with u-boot.rom . Please find the logs below - U-Boot 2015.07-rc1-20956-g5d3c2c5-dirty (Jun 04 2015 - 19:27:32 +0530) CPU: x86_64, vendor Intel, device 30679h DRAM: 2 GiB MMC: ValleyView SDHCI: 0, ValleyView SDHCI: 1 Using default environment Video: 1280x1024x16 Model: Intel Minnowboard Max SCSI: SATA link 0 timeout. SATA link 1 timeout. AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: 64bit ncq stag pm led clo pio slum part sxs scanning bus for devices... Found 0 device(s). Net: RTL8169#0 Warning: RTL8169#0 using MAC address from net device => Thanks for these wonderful patches. Regards, Saket Sinha _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
