On Tue, Mar 17, 2015 at 01:30:12PM -0300, Fabio Estevam wrote: > On Mon, Mar 16, 2015 at 1:50 PM, Chris Kuethe <chris.kue...@gmail.com> wrote: > > > U-Boot 2015.04-rc3-00209-ga74ef40-dirty (Mar 15 2015 - 22:04:22) > > > > CPU: Freescale i.MX53 rev2.1 at 800 MHz > > Reset cause: WDOG > > Here the reset cause is printed correctly. > > > Board: Inverse Path USB armory MkI > > I2C: ready > > DRAM: 512 MiB > > MMC: FSL_SDHC: 0 > > In: serial > > Out: serial > > Err: serial > > CPU: Freescale i.MX53 rev2.1 at 800 MHz > > Reset cause: unknown reset > > ,but here it fails. > > Why does CPU version and reset cause are printed twice?
The print_cpuinfo() was called twice, fixed in the v2 patch I just submitted. > > Is this happening with all mx53 boards or only with this one? mx53loco should have the same issue, but I did not tested it. Andrej > > I currently don't have access to any mx53 board to test this myself. > > I am adding some folks on Cc who may have access to other mx53 boards > and could probably test whether we have a common mx53 issue here. > > Regards, > > Fabio Estevam -- Andrej Rosano Inverse Path Srl <and...@inversepath.com> http://www.inversepath.com 0x01939B21 5BB8 574E 68E8 D841 E18F D5E9 CEAD E0CF 0193 9B21 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
