On Mon, Mar 16, 2015 at 1:50 PM, Chris Kuethe <chris.kue...@gmail.com> wrote:
> U-Boot 2015.04-rc3-00209-ga74ef40-dirty (Mar 15 2015 - 22:04:22) > > CPU: Freescale i.MX53 rev2.1 at 800 MHz > Reset cause: WDOG Here the reset cause is printed correctly. > Board: Inverse Path USB armory MkI > I2C: ready > DRAM: 512 MiB > MMC: FSL_SDHC: 0 > In: serial > Out: serial > Err: serial > CPU: Freescale i.MX53 rev2.1 at 800 MHz > Reset cause: unknown reset ,but here it fails. Why does CPU version and reset cause are printed twice? Is this happening with all mx53 boards or only with this one? I currently don't have access to any mx53 board to test this myself. I am adding some folks on Cc who may have access to other mx53 boards and could probably test whether we have a common mx53 issue here. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
