On Tue, Mar 17, 2015 at 9:30 AM, Fabio Estevam <feste...@gmail.com> wrote: > On Mon, Mar 16, 2015 at 1:50 PM, Chris Kuethe <chris.kue...@gmail.com> wrote: > >> U-Boot 2015.04-rc3-00209-ga74ef40-dirty (Mar 15 2015 - 22:04:22) >> >> CPU: Freescale i.MX53 rev2.1 at 800 MHz >> Reset cause: WDOG > > Here the reset cause is printed correctly. > ... > ,but here it fails. > > Why does CPU version and reset cause are printed twice?
I noticed that too - will investigate that later tonight. > Is this happening with all mx53 boards or only with this one? > I currently don't have access to any mx53 board to test this myself. Can't say if this happens on other boards as this is the only mx53 I have. It also happens on -rc2 ============= U-Boot 2015.04-rc2 (Mar 17 2015 - 01:35:15) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: unknown reset Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 ============= > I am adding some folks on Cc who may have access to other mx53 boards > and could probably test whether we have a common mx53 issue here. There was some discussion not long ago about reset cause handling (especially on mx6) which I haven't had a chance to fully digest yet. -- GDB has a 'break' feature; why doesn't it have 'fix' too? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
