On Thu, 6 Nov 2014 21:23:46 +0100 Marek Vasut <ma...@denx.de> wrote: > On Thursday, November 06, 2014 at 10:59:17 AM, Lukasz Majewski wrote: > > Hi Marek, > > > > > Split the Samsung specific PHY control into a separate file > > > and compile this into the S3C OTG driver only if used on a > > > Samsung system. > > > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > > Cc: Chin Liang See <cl...@altera.com> > > > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > > > Cc: Vince Bridgers <vbrid...@altera.com> > > > Cc: Pavel Machek <pa...@denx.de> > > > Cc: Stefan Roese <s...@denx.de> > > > Cc: Lukasz Majewski <l.majew...@samsung.com> > > [...] > > > Build HW: trats2 (Exynos4412) > > > > CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013 > > .12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12- > > sanitized/bin/arm-v7a-linux-gnueabi- > > > > Patches applied on top of v2014.10. > > Try this trivial patch (add missing include): > > diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c > b/drivers/usb/gadget/s3c_udc_otg_phy.c > index 055fe86..95bd8cf 100644 > --- a/drivers/usb/gadget/s3c_udc_otg_phy.c > +++ b/drivers/usb/gadget/s3c_udc_otg_phy.c > @@ -35,6 +35,8 @@ > #include "regs-otg.h" > #include <usb/lin_gadget_compat.h> > > +#include <usb/s3c_udc.h> > +
Ok, I will apply it and let you know about the result.
BTW: I assume that your work is to reuse the USB 2.0 UDC IP block
(probably in Altera).
I'd be elated if this is true :-).
> void otg_phy_init(struct s3c_udc *dev)
> {
> unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
>
> Best regards,
> Marek Vasut
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Best regards,
Lukasz Majewski
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
