On Thursday, November 06, 2014 at 10:59:17 AM, Lukasz Majewski wrote:
> Hi Marek,
>
> > Split the Samsung specific PHY control into a separate file
> > and compile this into the S3C OTG driver only if used on a
> > Samsung system.
> >
> > Signed-off-by: Marek Vasut <ma...@denx.de>
> > Cc: Chin Liang See <cl...@altera.com>
> > Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> > Cc: Vince Bridgers <vbrid...@altera.com>
> > Cc: Pavel Machek <pa...@denx.de>
> > Cc: Stefan Roese <s...@denx.de>
> > Cc: Lukasz Majewski <l.majew...@samsung.com>
[...]
> Build HW: trats2 (Exynos4412)
>
> CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013
> .12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-
> sanitized/bin/arm-v7a-linux-gnueabi-
>
> Patches applied on top of v2014.10.
Try this trivial patch (add missing include):
diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c
b/drivers/usb/gadget/s3c_udc_otg_phy.c
index 055fe86..95bd8cf 100644
--- a/drivers/usb/gadget/s3c_udc_otg_phy.c
+++ b/drivers/usb/gadget/s3c_udc_otg_phy.c
@@ -35,6 +35,8 @@
#include "regs-otg.h"
#include <usb/lin_gadget_compat.h>
+#include <usb/s3c_udc.h>
+
void otg_phy_init(struct s3c_udc *dev)
{
unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
