Hi Marek,
> Split the Samsung specific PHY control into a separate file
> and compile this into the S3C OTG driver only if used on a
> Samsung system.
>
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Chin Liang See <cl...@altera.com>
> Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> Cc: Vince Bridgers <vbrid...@altera.com>
> Cc: Pavel Machek <pa...@denx.de>
> Cc: Stefan Roese <s...@denx.de>
> Cc: Lukasz Majewski <l.majew...@samsung.com>
> ---
> drivers/usb/gadget/Makefile | 1 +
> drivers/usb/gadget/s3c_udc_otg.c | 64 +----------------------
> drivers/usb/gadget/s3c_udc_otg_phy.c | 99
> ++++++++++++++++++++++++++++++++++++
> include/configs/exynos4-common.h | 1 +
> include/configs/s5p_goni.h | 1 +
> include/configs/s5pc210_universal.h | 1 +
> include/configs/smdkv310.h | 1 + 7 files changed, 106
> insertions(+), 62 deletions(-) create mode 100644
> drivers/usb/gadget/s3c_udc_otg_phy.c
>
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index 2efd5a4..70bb550 100644
> --- a/drivers/usb/gadget/Makefile
> +++ b/drivers/usb/gadget/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o
> usbstring.o ifdef CONFIG_USB_GADGET
> obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
> obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
> +obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
> obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
> obj-$(CONFIG_CI_UDC) += ci_udc.o
> obj-$(CONFIG_THOR_FUNCTION) += f_thor.o
> diff --git a/drivers/usb/gadget/s3c_udc_otg.c
> b/drivers/usb/gadget/s3c_udc_otg.c index b808ddaf..b910053 100644
> --- a/drivers/usb/gadget/s3c_udc_otg.c
> +++ b/drivers/usb/gadget/s3c_udc_otg.c
> @@ -151,68 +151,8 @@ bool dfu_usb_get_reset(void)
> return !!(readl(®->gintsts) & INT_RESET);
> }
>
> -void otg_phy_init(struct s3c_udc *dev)
> -{
> - unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> - struct s3c_usbotg_phy *phy =
> - (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> -
> - dev->pdata->phy_control(1);
> -
> - /*USB PHY0 Enable */
> - printf("USB PHY0 Enable\n");
> -
> - /* Enable PHY */
> - writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
> -
> - if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
> - writel((readl(&phy->phypwr)
> - &~(PHY_0_SLEEP | OTG_DISABLE_0 |
> ANALOG_PWRDOWN)
> - &~FORCE_SUSPEND_0), &phy->phypwr);
> - else /* C110 GONI */
> - writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 |
> ANALOG_PWRDOWN)
> - &~FORCE_SUSPEND_0), &phy->phypwr);
> -
> - if (s5p_cpu_id == 0x4412)
> - writel((readl(&phy->phyclk) &
> ~(EXYNOS4X12_ID_PULLUP0 |
> - EXYNOS4X12_COMMON_ON_N0)) |
> EXYNOS4X12_CLK_SEL_24MHZ,
> - &phy->phyclk); /* PLL 24Mhz */
> - else
> - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 |
> COMMON_ON_N0)) |
> - CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
> -
> - writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
> - | PHY_SW_RST0, &phy->rstcon);
> - udelay(10);
> - writel(readl(&phy->rstcon)
> - &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST),
> &phy->rstcon);
> - udelay(10);
> -}
> -
> -void otg_phy_off(struct s3c_udc *dev)
> -{
> - unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> - struct s3c_usbotg_phy *phy =
> - (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> -
> - /* reset controller just in case */
> - writel(PHY_SW_RST0, &phy->rstcon);
> - udelay(20);
> - writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
> - udelay(20);
> -
> - writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
> - | FORCE_SUSPEND_0, &phy->phypwr);
> -
> - writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
> -
> - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
> - &phy->phyclk);
> -
> - udelay(10000);
> -
> - dev->pdata->phy_control(0);
> -}
> +__weak void otg_phy_init(struct s3c_udc *dev) {}
> +__weak void otg_phy_off(struct s3c_udc *dev) {}
>
> /***********************************************************/
>
> diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c
> b/drivers/usb/gadget/s3c_udc_otg_phy.c new file mode 100644
> index 0000000..055fe86
> --- /dev/null
> +++ b/drivers/usb/gadget/s3c_udc_otg_phy.c
> @@ -0,0 +1,99 @@
> +/*
> + * drivers/usb/gadget/s3c_udc_otg.c
> + * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers
> + *
> + * Copyright (C) 2008 for Samsung Electronics
> + *
> + * BSP Support for Samsung's UDC driver
> + * available at:
> + *
> git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git
> + *
> + * State machine bugfixes:
> + * Marek Szyprowski <m.szyprow...@samsung.com>
> + *
> + * Ported to u-boot:
> + * Marek Szyprowski <m.szyprow...@samsung.com>
> + * Lukasz Majewski <l.majew...@samsumg.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <linux/list.h>
> +#include <malloc.h>
> +
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +
> +#include <asm/byteorder.h>
> +#include <asm/unaligned.h>
> +#include <asm/io.h>
> +
> +#include <asm/mach-types.h>
> +
> +#include "regs-otg.h"
> +#include <usb/lin_gadget_compat.h>
> +
> +void otg_phy_init(struct s3c_udc *dev)
> +{
> + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> + struct s3c_usbotg_phy *phy =
> + (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> +
> + dev->pdata->phy_control(1);
> +
> + /*USB PHY0 Enable */
> + printf("USB PHY0 Enable\n");
> +
> + /* Enable PHY */
> + writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
> +
> + if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
> + writel((readl(&phy->phypwr)
> + &~(PHY_0_SLEEP | OTG_DISABLE_0 |
> ANALOG_PWRDOWN)
> + &~FORCE_SUSPEND_0), &phy->phypwr);
> + else /* C110 GONI */
> + writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 |
> ANALOG_PWRDOWN)
> + &~FORCE_SUSPEND_0), &phy->phypwr);
> +
> + if (s5p_cpu_id == 0x4412)
> + writel((readl(&phy->phyclk) &
> ~(EXYNOS4X12_ID_PULLUP0 |
> + EXYNOS4X12_COMMON_ON_N0)) |
> EXYNOS4X12_CLK_SEL_24MHZ,
> + &phy->phyclk); /* PLL 24Mhz */
> + else
> + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 |
> COMMON_ON_N0)) |
> + CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
> +
> + writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
> + | PHY_SW_RST0, &phy->rstcon);
> + udelay(10);
> + writel(readl(&phy->rstcon)
> + &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST),
> &phy->rstcon);
> + udelay(10);
> +}
> +
> +void otg_phy_off(struct s3c_udc *dev)
> +{
> + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> + struct s3c_usbotg_phy *phy =
> + (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> +
> + /* reset controller just in case */
> + writel(PHY_SW_RST0, &phy->rstcon);
> + udelay(20);
> + writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
> + udelay(20);
> +
> + writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
> + | FORCE_SUSPEND_0, &phy->phypwr);
> +
> + writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
> +
> + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
> + &phy->phyclk);
> +
> + udelay(10000);
> +
> + dev->pdata->phy_control(0);
> +}
> diff --git a/include/configs/exynos4-common.h
> b/include/configs/exynos4-common.h index 89ba14e..41631c7 100644
> --- a/include/configs/exynos4-common.h
> +++ b/include/configs/exynos4-common.h
> @@ -59,6 +59,7 @@
>
> #define CONFIG_USB_GADGET
> #define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
> #define CONFIG_USB_GADGET_DUALSPEED
> #define CONFIG_USB_GADGET_VBUS_DRAW 2
>
> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> index 3633a35..dfa2e07 100644
> --- a/include/configs/s5p_goni.h
> +++ b/include/configs/s5p_goni.h
> @@ -281,6 +281,7 @@
> #define CONFIG_SYS_MAX_I2C_BUS 7
> #define CONFIG_USB_GADGET
> #define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
> #define CONFIG_USB_GADGET_DUALSPEED
> #define CONFIG_USB_GADGET_VBUS_DRAW 2
> #define CONFIG_CMD_USB_MASS_STORAGE
> diff --git a/include/configs/s5pc210_universal.h
> b/include/configs/s5pc210_universal.h index 4b30d148..e7bace4 100644
> --- a/include/configs/s5pc210_universal.h
> +++ b/include/configs/s5pc210_universal.h
> @@ -181,6 +181,7 @@
>
> #define CONFIG_USB_GADGET
> #define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
> #define CONFIG_USB_GADGET_DUALSPEED
>
> /*
> diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
> index a2469eb..655025c 100644
> --- a/include/configs/smdkv310.h
> +++ b/include/configs/smdkv310.h
> @@ -14,6 +14,7 @@
> #undef CONFIG_BOARD_COMMON
> #undef CONFIG_USB_GADGET
> #undef CONFIG_USB_GADGET_S3C_UDC_OTG
> +#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
> #undef CONFIG_CMD_USB_MASS_STORAGE
> #undef CONFIG_REVISION_TAG
> #undef CONFIG_CMD_THOR_DOWNLOAD
Unfortunately I've found following build errors:
CC drivers/usb/gadget/s3c_udc_otg_phy.o
drivers/usb/gadget/s3c_udc_otg_phy.c:38:26: warning: 'struct s3c_udc'
declared inside parameter list [enabled by default] void
otg_phy_init(struct s3c_udc *dev) ^
drivers/usb/gadget/s3c_udc_otg_phy.c:38:26: warning: its scope is only
this definition or declaration, which is probably not what you want
[enabled by default] drivers/usb/gadget/s3c_udc_otg_phy.c: In
function 'otg_phy_init': drivers/usb/gadget/s3c_udc_otg_phy.c:40:33:
error: dereferencing pointer to incomplete type unsigned int
usb_phy_ctrl = dev->pdata->usb_phy_ctrl; ^
drivers/usb/gadget/s3c_udc_otg_phy.c:42:31: error: dereferencing
pointer to incomplete type (struct s3c_usbotg_phy
*)dev->pdata->regs_phy; ^ drivers/usb/gadget/s3c_udc_otg_phy.c:44:5:
error: dereferencing pointer to incomplete type
dev->pdata->phy_control(1); ^
drivers/usb/gadget/s3c_udc_otg_phy.c:52:9: error: dereferencing pointer
to incomplete type if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210
Universal */ ^
drivers/usb/gadget/s3c_udc_otg_phy.c:52:31: error: 'PHY0_SLEEP'
undeclared (first use in this function) if (dev->pdata->usb_flags ==
PHY0_SLEEP) /* C210 Universal */ ^
drivers/usb/gadget/s3c_udc_otg_phy.c:52:31: note: each undeclared
identifier is reported only once for each function it appears in
drivers/usb/gadget/s3c_udc_otg_phy.c: At top level:
drivers/usb/gadget/s3c_udc_otg_phy.c:76:25: warning: 'struct s3c_udc'
declared inside parameter list [enabled by default] void
otg_phy_off(struct s3c_udc *dev) ^
drivers/usb/gadget/s3c_udc_otg_phy.c: In function 'otg_phy_off':
drivers/usb/gadget/s3c_udc_otg_phy.c:78:33: error: dereferencing
pointer to incomplete type unsigned int usb_phy_ctrl =
dev->pdata->usb_phy_ctrl; ^
drivers/usb/gadget/s3c_udc_otg_phy.c:80:31: error: dereferencing
pointer to incomplete type (struct s3c_usbotg_phy
*)dev->pdata->regs_phy; ^ drivers/usb/gadget/s3c_udc_otg_phy.c:98:5:
error: dereferencing pointer to incomplete type
dev->pdata->phy_control(0); ^
make[1]: *** [drivers/usb/gadget/s3c_udc_otg_phy.o] Error 1
make: *** [drivers/usb/gadget] Error 2
Build HW: trats2 (Exynos4412)
CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013.12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/bin/arm-v7a-linux-gnueabi-
Patches applied on top of v2014.10.
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
