On Wed, Jun 03, 2009 at 04:44:54AM +0800, Liu Dave-R63238 wrote: > > What is the ACR register settings?
=> md e0000800 1 e0000800: 00030300 .... > > What is the freq of core/csb/DDR and TSEC block? According to U-Boot's clocks command: => clocks Clock configuration: Core: 533.333 MHz Coherent System Bus: 266.667 MHz Local Bus Controller:266.667 MHz Local Bus: 33.333 MHz DDR: 266.667 MHz SEC: 88.889 MHz I2C1: 266.667 MHz I2C2: 266.667 MHz TSEC1: 266.667 MHz TSEC2: 266.667 MHz USB DR: 88.889 MHz USB MPH: 88.889 MHz > > And what is the SICRH[30-31]? > Did you have the matching settings for GMII with 3.3V? > => md e0000118 1 e0000118: 00000002 .... This looks wrong. The MPC8349EMDS board has the exact same setting in that register. Writing 0x0 to the SICRH register did not cause the problem to go away. I'll go find out why this is set in the MPC8349EMDS configuration as well. It shouldn't be. Thanks, Ira _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
