On Tue, Jun 02, 2009 at 12:35:14PM -0500, Peter Tyser wrote:
> On Tue, 2009-06-02 at 09:42 -0700, David Hawkins wrote:
> > > I am unable to reproduce the corruption on my MPC8349EMDS eval board,
> > > but I'm running out of ideas to try and find the source of this problem.
> > 
> > One more piece of info: the MPC8349E-MDS board contains the
> > MPC8349E processor, whereas our board contains the MPC8349EA
> > (silicon v 3.1) processor. We did have a couple of MPC8349EA-MDS
> > boards, however, the Xilinx CPLD on both boards spontaneously
> > destructed (the CPLD sticky labels melted!).
> > 
> > We can try putting the MPC8349EA processor from one of the
> > dead boards into the MPC8349E-MDS board socket - I believe
> > this is ok - feel free to warn us that its not :)
> 
> What interface are you using between the MAC and PHY?  I saw somewhat
> similar weirdness at gigabit on a board when using RGMII and the clock
> delays in the PHY and PCB didn't match up correctly (Section 5.12.2 from
> the 88e1111 manual).  If you aren't using RGMII, this wouldn't be your
> issue though...
> 

We're using GMII, exactly the same as the Freescale eval board. I did a
very quick test with the board in RGMII mode as well, and the board
behaved in exactly the same way it does in GMII mode.

Thanks,
Ira
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to