Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek
capacitive touch screen.

Auto-detection is enabled, so no explicit configuration is needed.

Signed-off-by: Eric Nelson <eric.nel...@boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c 
b/board/boundary/nitrogen6x/nitrogen6x.c
index 6695f87..c91e0c4 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -661,6 +661,26 @@ struct display_info_t const displays[] = {{
                .vmode          = FB_VMODE_NONINTERLACED
 } }, {
        .bus    = 2,
+       .addr   = 0x41,
+       .pixfmt = IPU_PIX_FMT_LVDS666,
+       .detect = detect_i2c,
+       .enable = enable_lvds,
+       .mode   = {
+               .name           = "amp1024x600",
+               .refresh        = 60,
+               .xres           = 1024,
+               .yres           = 600,
+               .pixclock       = 15385,
+               .left_margin    = 220,
+               .right_margin   = 40,
+               .upper_margin   = 21,
+               .lower_margin   = 7,
+               .hsync_len      = 60,
+               .vsync_len      = 10,
+               .sync           = FB_SYNC_EXT,
+               .vmode          = FB_VMODE_NONINTERLACED
+} }, {
+       .bus    = 2,
        .addr   = 0x48,
        .pixfmt = IPU_PIX_FMT_RGB666,
        .detect = detect_i2c,
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to