On Sun, 21 Sep 2014, Marek Vasut wrote: > From: Pavel Machek <pa...@denx.de> > > Split the SoCFPGA configuration into SoC-specific part which is > common for all boards (socfpga_cyclone5_common.h) and a board > specific part. There is currently only one board, which is the > generic SoCFPGA board (socfpga_cyclone5.h), but there are more > to come. > > This is necessary due to various features of the boards, which > unfortunatelly cannot be autodetected. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Chin Liang See <cl...@altera.com> > Cc: Dinh Nguyen <dingu...@altera.com> > Cc: Albert Aribaud <albert.u.b...@aribaud.net> > Cc: Tom Rini <tr...@ti.com> > Cc: Wolfgang Denk <w...@denx.de> > Cc: Pavel Machek <pa...@denx.de> > --- > include/configs/socfpga_cyclone5.h | 211 > ++---------------------------- > include/configs/socfpga_cyclone5_common.h | 196 +++++++++++++++++++++++++++ > 2 files changed, 207 insertions(+), 200 deletions(-) > create mode 100644 include/configs/socfpga_cyclone5_common.h
Thanks for taking a stab at this, but I think it makes more sense to have socfpga_commoh.h and socfpga_cyclone5.h. The _common file can have most of the common settings for u-boot, while _cyclone5 will have the base addresses for all the various IP blocks. Then once everything is done for Cyclone5, we can add support for the Arria5 SOC by just adding socfpga_arria5.h. BR, Dinh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot