Hi Eric > > > Are you referring to **another** manufacturer? > > We have support for SABRE Lite in main-line and are actively maintaining it.
What about i.MX6DL SABRE Auto ? Is it in main-line too ? If yes, which config file should I use ? By looking at boards.cfg, I could find mx6qsabreauto, ma6dlsabrelite, nitrogen6dl..., but there is no something like mx6dlsabreauto. The support of it is also in freesacle git mentioned by Thierry http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/commit/?h=imx_v2009.08_3.0.35_4.1.0&id=c9b49bf8b7c64e628ce2625272e4deb65b8c8720 Thanks, Miao > > > As that freescale version is too old for me (that is, it does not have > > support for USB or splashscreen), I would like to use the latest > > version of mainline u-boot. > > > > You should start by using a board file based on Nitrogen6x (which contains > support for both Nitrogen6x and SABRE Lite by looking at one pin: > http://git.denx.de/?p=u- > boot.git;a=blob;f=board/boundary/nitrogen6x/nitrogen6x.c;h=d9c05b07bfa > e83466513735cbec95c7f949de7a5;hb=HEAD#l736 > > > I am a little puzzled, when I see that sabrelite support has been > > removed from main, it seems to have been replaced by the nitrogen > > board, so my manufacturer patch -badly- applies, especially due to the > > disparition of flash_header.S ... > > > > The differences are minor and explained in more detail here: > http://boundarydevices.com/differences-sabre-lite-nitrogen6x > > > I quickly found out that attempting a git rebase of > > rel_imx_3.0.35_4.1.0 to master was a bad idea, too. > > > > So what would be the easiest and time less costing option to achieve > > what I want to do ? > > > > I'd recommend starting with main-line Nitrogen6x code base, and update as > needed for your particulars. > > Regards, > > > Eric > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
