Hi Thierry,
On 02/22/2014 10:56 AM, Thierry Bultel wrote:
Hi,
The board I am working on, is based on the Freescale sabrelite board,
the manufacturer provides support for it, as an about 1000
> lines patch that applies to rel_imx_3.0.35_4.1.0
(3.0.35_4.1.0 is the kernel version I am using)
Are you referring to **another** manufacturer?
We have support for SABRE Lite in main-line and are actively
maintaining it.
As that freescale version is too old for me (that is, it does not have
support for USB or splashscreen),
I would like to use the latest version of mainline u-boot.
You should start by using a board file based on Nitrogen6x (which
contains support for both Nitrogen6x and SABRE Lite by looking
at one pin:
http://git.denx.de/?p=u-boot.git;a=blob;f=board/boundary/nitrogen6x/nitrogen6x.c;h=d9c05b07bfae83466513735cbec95c7f949de7a5;hb=HEAD#l736
I am a little puzzled, when I see that sabrelite support has been
removed from main, it seems to have been replaced
by the nitrogen board, so my manufacturer patch -badly- applies,
especially due to the disparition of flash_header.S ...
The differences are minor and explained in more detail here:
http://boundarydevices.com/differences-sabre-lite-nitrogen6x
I quickly found out that attempting a git rebase of rel_imx_3.0.35_4.1.0
to master was a bad idea, too.
So what would be the easiest and time less costing option to achieve
what I want to do ?
I'd recommend starting with main-line Nitrogen6x code base, and update
as needed for your particulars.
Regards,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
