On Thursday 19 December 2013 12:49 PM, Jagan Teki wrote:
On Thu, Dec 19, 2013 at 12:37 PM, Sourav Poddar<sourav.pod...@ti.com> wrote:
On Thursday 19 December 2013 12:24 PM, Jagan Teki wrote:
On Mon, Nov 25, 2013 at 4:28 PM, Sourav Poddar<sourav.pod...@ti.com>
wrote:
Hi Jagan,
On Thursday 14 November 2013 09:09 PM, Sourav Poddar wrote:
The patch series add support for enabling qspi
on AM43xx at uboot.
Testing done:
-------------
Wrote a uImage to the flash, read it back and boot the
kernel.
Jagannadha Sutradharudu Teki (1):
sf: macronix: Add support for MX25L51235F
Sourav Poddar (4):
am43xx: add qspi support
am437x_epos_evm: add SPL API, QSPI, and serial flash support
qspi/spi: Add AM43xx specifics changes
am43xx: add delay before xfer
arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 1 +
arch/arm/include/asm/arch-am33xx/cpu.h | 4 +++-
arch/arm/include/asm/arch-am33xx/omap.h | 1 +
board/ti/am43xx/mux.c | 11 +++++++++++
drivers/mtd/spi/sf_probe.c | 2 ++
drivers/spi/ti_qspi.c | 29
++++++++++++++++++++++++++---
include/configs/am43xx_evm.h | 20 ++++++++++++++++++++
7 files changed, 64 insertions(+), 4 deletions(-)
If these patches seems fine to you, can these be picked?
Please send the next version patches - fix the comments as we discussed so
far.
I will send the next version.
But, what about the delay patch, I tried other stuffs but could not see any
thing
that helps.
So, I will send the delay patch also as of now, to make it work out of
mainline.
I am some how OK with that as that change is in ur driver..
Just try this change
/* FIXME: comments here... */
+#ifdef CONFIG_AM43XX
+ udelay(100);
+#endif
And also write the bug log on commit message(means with out delay)
Try to ass the testing logs on doc/ - for each time you tested a new
flash or new driver.
Ok. I will do as you suggest above,
Will add a doc/ for am43x also as it is there for dra.
Thanks,
Sourav
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
