Hello Stelian, >> Hmm, I can do that, but not before September 29. > The stick is fine, it does work ok on the 9261:
Thanks for testing it, it sounds good... But that does mean that there is a SoC dependant issue here... I looked at the code again, and found an oddity that I overlooked before and that I need to investigate some more when I have our USB analyser back. It could explain different behaviour across different OHCI controllers. I will keep you informed when I have more news. (maybe tomorrow, or else beginning next week) Kind Regards, Remy > usb reset > (Re)start USB... > USB: scanning bus for devices... New Device 0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > set address 1 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x8 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x19 > get_conf_no 0 Result 25, wLength 25 > if 0, ep 0 > ##EP epmaxpacketin[1] = 2 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=0, Product=1, SerialNumber=0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 1 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 > length 0xFF > Manufacturer > Product OHCI Root Hub > SerialNumber > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x4 > usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 > length 0x9 > usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length > 0x4 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length > 0x0 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > New Device 1 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x40 > usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length > 0x0 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length > 0x4 > usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length > 0x0 > set address 2 > usb_control_msg: request: 0x5, requesttype: 0x0, value 0x2 index 0x0 length > 0x0 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 > length 0x12 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x8 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 > length 0x27 > get_conf_no 0 Result 39, wLength 39 > if 0, ep 0 > if 0, ep 1 > if 0, ep 2 > ##EP epmaxpacketout[1] = 64 > ##EP epmaxpacketin[2] = 64 > ##EP epmaxpacketin[3] = 64 > set configuration 1 > usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length > 0x0 > new device strings: Mfr=1, Product=2, SerialNumber=3 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 > length 0xFF > USB device number 2 default language ID 0x409 > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x409 > length 0xFF > usb_control_msg: request: 0x6, requesttype: 0x80, value 0x303 index 0x409 > length 0xFF > Manufacturer P Technology > Product USB Mass Storage Device > SerialNumber 00000000000722 > usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length > 0x4 > 2 USB Device(s) found > scanning bus for storage devices... usb_control_msg: request: 0xFF, > requesttype: 0x21, value 0x0 index 0x0 length 0x0 > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x82 length > 0x0 > usb_control_msg: request: 0x1, requesttype: 0x2, value 0x0 index 0x1 length > 0x0 > 1 Storage Device(s) found > U-Boot> usb storage > Device 0: Vendor: UT163 Rev: 0.00 Prod: USB Flash Disk > Type: Removable Hard Disk > Capacity: 963.9 MB = 0.9 GB (1974271 x 512) > U-Boot> > U-Boot> fatls usb 0 1 > . > 51878326 download.tgz > 20351 tp.tgz > > 2 file(s), 0 dir(s) > > U-Boot> > > -- > Stelian Pop <[EMAIL PROTECTED]> > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
