Hello Stelian, >> Does it work without the patches? Is it a regression, or still an >> improvement? > It is an improvement, without the patches it doesn't work at all
I am happy to hear that :-))) So, Markus, please do not let this issue stop you from integrating these patches :-)) >> > U-Boot> usb storage >> > Device 0: not available > What about this one ? Isn't this supposed to say something else ? I get these messages also, and I did not considered that to be a problem, because everything works... I got these messages from the beginning, even when USB worked on a single USB stick when I compiled everything with GCC 3.4. I will look into it, but I want to make clear that it is not something I broke with my patches. >> > U-Boot> fatinfo usb 0:1 >> > ** Invalid boot device ** >> I have no explanation for this error, it could be related to the >> filesystem on the USB stick itself. > No, the filesystem is ok. (it's a 1GB stick btw). I have tested with USB sticks in the range of 256 MB up to 8 GB. So, the size should not matter. I tested FAT16 and FAT32. But, there are USB sticks out there that contain actually 2 devices with an internal hub. Some of these work, and some of these do not. It has to do with U-boot only capable of handling 1 USB storage device at a time. An example of such sticks can be found here (there may also be other manufacturers): http://www.pendrivestore.com/products/pendriveusb2/index.shtml (Notice that from this manufacturer none of the 1GB editions seem to work, however the 8GB and 256 MB versions work properly) > I'll try to test on some other AT91SAM9 boards later today, if I find a > few minutes... Thanks, and I expect to hear some more positive news ;-))) Kind Regards, Remy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
