Le jeudi 18 septembre 2008 à 16:54 +0200, Remy Bohmer a écrit : > Hello Stelian,
Hi Remy, > > > I gave your patches a run on an AT91CAP9 and had limited success with > > them (usb seems to work, usb storage do not): > > Does it work without the patches? Is it a regression, or still an improvement? It is an improvement, without the patches it doesn't work at all > > > U-Boot> usb part > > print_part of 0 > > > > Partition Map for USB device 0 -- Partition Type: DOS > > > > Partition Start Sector Num Sectors Type > > 1 63 1974208 6 > > > > print_part of 1 > > ## Unknown partition table > > These errors are normal, 'usb part' seems to look for primary > partitions on a USB stick that is formatted as a floppy... > > > U-Boot> usb storage > > Device 0: not available What about this one ? Isn't this supposed to say something else ? > > U-Boot> fatinfo usb 0:1 > > > > ** Invalid boot device ** > > I have no explanation for this error, it could be related to the > filesystem on the USB stick itself. No, the filesystem is ok. (it's a 1GB stick btw). > I do not see any errors that USB itself is not working, the problems I > fixed were in the USB area, and they solved all the problems I > encountered with USB sticks on AT91SAM9261 (OHCI) I'll try to test on some other AT91SAM9 boards later today, if I find a few minutes... Stelian. -- Stelian Pop <[EMAIL PROTECTED]> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
