This a part of the file fr_abbr.conf in the Sword conf I just inverted the columns: [Book Abbrevs] Gen = GN Exod = EX Lev = LÉV Num = NB Deut = DEU Josh = JOS Judg = JUG Ruth = RUTH 1Sam = 1 SA 2Sam = 2 SA 1Kgs = 1 R 2Kgs = 2 R 1Chr = 1 CH 2Chr = 2 CH Ezra = ESD Neh = NÉH Esth = EST Job = JOB Ps = PS Prov = PRO Eccl = ECC Song = CANT Isa = ÉS Jer = JÉR Lam = LAM Ezek = ÉZ Dan = DAN Hos = OS Joel = JOËL Amos = AM Obad = ABD Jonah = JON Mic = MI Nah = NAH Hab = HAB Zeph = SO Hag = AG Zech = ZAC Mal = MA Matt = MT Mark = MC Luke = Lc John = Jn Acts = ACT Rom = ROM 1Cor = 1 CO 2Cor = 2 CO Gal = GAL Eph = ÉPH Phil = PHP Col = COL 1Thess = 1 TH 2Thess = 2 TH 1Tim = 1 TI 2Tim = 2 TI Titus = TITE Phlm = PHM Heb = HÉB Jas = JAC 1Pet = 1 Pi 2Pet = 2 Pi 1John = 1 JN 2John = 2 JN 3John = 3 JN Jude = JUDE Rev = APOC Tob = TOB Jdt = JDT EsthGr = ESTGREC AddEsth = ADDEST Wis = SAG SirP = PRSIR Sir = SIR Bar = BAR EpJer = LTJR DanGr = DANGREC AddDan = ADDDAN PrAzar = PRAZAR Sus = SUZ Bel = BEL 1Macc = 1 Ma 2Macc = 2 Ma 3Macc = 3 Ma 4Macc = 4 Ma PrMan = MAN 1Esd = 3 ESD 2Esd = 4 ESD AddPs = PS ADD Odes = ODES PssSol = PS SAL JoshA = JOSA JudgB = JGV TobS = TOBS SusTh = SUSTH DanTh = DANTH BelTh = BELTH EpLao = LAOD 5Ezra = 5 ESD 4Ezra = AP ESD 6Ezra = 6 ESD PrSol = PRSAL PrJer = PRJÉR 1En = HÉN Jub = JUB 4Bar = 4 BAR 1Meq = 1 M ÉT 2Meq = 2 M ÉT 3Meq = 3 M ÉT EpCorPaul = COP 3Cor = 3 COR DormJohn = DORMJEAN JosAsen = JOSASEN T12Patr = T12PATR T12Patr.Tash = TASER T12Patr.Tbenj = TBEN T12Patr.Tdan = TDAN T12Patr.Tgad = TGAD T12Patr.Tiss = TISS T12Patr.Tjos = TJOS T12Patr.Tjud = TJUDA T12Patr.Tlevi = TLÉVI T12Patr.Tnaph = TNEPH T12Patr.Treu = TRUB T12Patr.Tsim = TSIM T12Patr.Tzeb = TZAB 1Clem = 1 CLÉM 2Clem = 2 CLÉM Did = DID Herm = HERM
I you wait a little bit I will send you the it-utf8.conf too. I suggest to keep the complet english string in the conf for. It is easier for translator to have the text near. Il 28/05/2019 00:18, Troy A. Griffitts ha scritto: > Dear Fr. Cyrille, > > On your phone it should be located at /sdcard/sword/uilocales.d/. If > that folder doesn't exist, you should be able to create it with a file > manager on your phone, then place your locale .conf file in there. If > you have a removable sdcard, you should be able to plug it into your > computer and create the /sword/uilocales.d/ path from the root of the > card and copy your locale .conf file in there and place the sdcard back > in your phone. Be sure to kill Bishop and restart it for it to pick up > your new locale file. > > As soon as I get your full set of French abbreviations (or from > Dominique), I can rebuild the .apk with your French submission and we > can all see how it works. > > Hope this helps, > > Troy > > > On 5/27/19 1:17 PM, Cyrille wrote: >> Il 26/05/2019 21:46, Troy A. Griffitts ha scritto: >>> As I mentioned in my previous email. This past weekend I have spent >>> some time internationalizing one of our Android and iOS apps: >>> >>> https://play.google.com/store/apps/details?id=org.crosswire.bishop >>> >>> I have created a "gibberish" translation file for testing, but now am to >>> the point that I believe it is mostly complete. If you might be willing >>> to translate this gibberish file into a language with which you are >>> natively familiar, I am sure that people group would be very grateful >>> for your work, and so would I. Here is the file for translation. >>> >>> https://git.crosswire.org/main/bishop/blob/master/www/bundledResources/uilocales.d/de-utf8.conf >>> >>> The format should be straighforward to understand. Generally it is: >>> >>> English Text=Translated Text >>> >>> There are a few occasions where buttons are split into 2 lines, e.g., >>> >>> Variant Study L1=Variant >>> >>> Variant Study L2=Study >>> >>> This should be generally intuitive to figure out while translating. >>> >>> Finally, there are some very long strings in the "About" screen and >>> Install Manager Warning screens which can be seen as the last 10 lines >>> or so in the file. I decided to use shorter keys than the entire >>> English text so these have keys like: >>> >>> App About Header= >>> >>> App About L1= >>> >>> App About L2= >>> >>> I hope you can figure out from my gibberish here what the original >>> english actually is. My giggerish dialect is generally a conversion of >>> non-initial vowels to zero (0). You may need to find these long strings >>> in the app if you can't figure out my gibberish. >>> >>> I will post development bundles with translations included as they come >>> in, so you can see how your work looks in the app before we publish the >>> next version. If you'd like to try your work out as you translate, on >>> Android, the app will look on your SD card for locales at: >>> /sword/uilocales.d/, so if you place your locale file there, it should >>> be recognized and available to choose under settings. >> Please can you give more information about this place on android? I look >> for uilocales.d folder, I don't found it. I tried to create it in the >> sword folder I found but I doesn't work. >>> A developer preview of 1.2.0 which includes locale support is available >>> at: http://crosswire.org/~scribe/bishop.apk >>> >>> Thank you for any help. Blessings, >>> >>> Troy >>> >>> >>> _______________________________________________ >>> sword-devel mailing list: sword-devel@crosswire.org >>> http://www.crosswire.org/mailman/listinfo/sword-devel >>> Instructions to unsubscribe/change your settings at above page >> _______________________________________________ >> sword-devel mailing list: sword-devel@crosswire.org >> http://www.crosswire.org/mailman/listinfo/sword-devel >> Instructions to unsubscribe/change your settings at above page > _______________________________________________ > sword-devel mailing list: sword-devel@crosswire.org > http://www.crosswire.org/mailman/listinfo/sword-devel > Instructions to unsubscribe/change your settings at above page
_______________________________________________ sword-devel mailing list: sword-devel@crosswire.org http://www.crosswire.org/mailman/listinfo/sword-devel Instructions to unsubscribe/change your settings at above page
