ode, then the resolv.conf is updated with my DNS
address.
Is there something I'm missing here in my setup?
--
/Tarek/
--
Mike Looijmans
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
many older "projects" that only run
on that hardware and no time/opportunity to upgrade, hence
my desire to share in this manner.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 6
b
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the environm
this page using ten feet neon tubes. Seriously.
People have been asking me this question over and over, and all I had to offer
was some crappy scripts to invalidate and rebuild a package.
Kind regards,
Mike.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg
On 27-05-15 21:19, Joel (Xi Zhou) Zhou wrote:
Hi all,
We have a Yocto BSP based on arm64/aarch64 machine.
On top of this, I need to create a firmware recipe, which need armv7
cross-compiler.
So question is, how to support multiple toolchain in Yocto?
Yocto/OE doesn't support multiple "machin
ith NAND, you'd have to use a fault-tolerant filesystem to store the rootfs.
Dunno if it's possible to store a squashfs as a volume into ubi. The rest is
similar to NOR.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Pos
.. but the longer serving oe/bitbake
folks may have a better example to point at.
If there are examples for a more convenient way to switch kernels in a
recipe rather than inside a .conf file, please point me to the right
direction.
Regards
-Klaus
Kind regards,
Mike Looijmans
System
On 16-08-15 09:39, Khem Raj wrote:
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm...@topicproducts.com
Website
hdrc = "my configure"
How to disable the OVERRIDES temperally here? Or may be there is another
way?
This might work (untested):
MY_HDRC_MODULE_NAME = "conf_ci_hdrc"
module_${MY_HDRC_MODULE_NAME} = "my configure"
Kind regards,
Mike Looijmans
System Expert
TOPIC
On 16-09-15 03:13, Khem Raj wrote:
On Sep 15, 2015, at 7:47 AM, Trevor Woerner wrote:
On 09/15/15 04:26, Paul D. DeRocco wrote:
My embedded system has enough room in it for full-featured command line
tools,...
"Embedded" in my world is not about RAM or disk size. It's about
building a device t
On 16-09-15 18:43, Paul D. DeRocco wrote:
From: Mike Looijmans
"Embedded" in my world is not about RAM or disk size. It's about
building a device that has a set task in life, and nothing is as
important as that one task. Whether that's running on an i7
or an M3 is irreleva
On 16-09-15 16:13, Andy Pont wrote:
Ross wrote...
Now to figure out why the tar.gz file for the root file system has grown
from just under 3MiB to almost 15MiB!
That would be systemd... it pulls in a lot of libraries that are fairly common
on complex systems but on a minimal image less so.
d entries to start/stop things.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
P
edly, "autofs" can accomplish this, but I've never met anyone who got
that to actually work.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31
On 23-09-15 12:09, Daniel. wrote:
I think that sync just flushes data to disk and umount clears the dirty bit.
There is no sync.vfat that I know.
Em 23/09/2015 05:31, "Paul D. DeRocco" mailto:pdero...@ix.netcom.com>> escreveu:
> From: Mike Looijmans
>
figuration files and/or recipes and enlighten us!
So far, all I ever got autofs to accomplish was giving me a major headache.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telef
li-oe-core/commit/8d31a7e6d7cde52c59b576247579eb5e2e8e6e7c
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm...@topicproducts.com
Websi
skew, problems with
concurrent file access, something else?
Thanks,
Luke
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm.
low 50% dirty pages, and extend the timeout to several minutes), and (if you
have >14) putting cfq back into its rightful place as io scheduler made a huge
difference for me.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440
ages/openpli-image.bb#L45
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please
On 08/07/2014 11:10 AM, Paul Eggleton wrote:
...
* Provide tools to allow modifying software for which a recipe already exists.
If the user has an external source tree we use that, otherwise we can fetch
the source, apply any patches and place the result in an external source tree,
possibly mana
at starting
something desktop GUI application or so.
Am I missing something, is this a bug, or is this expected behaviour and am I
supposed to type some magic command first?
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5
On 11/13/2014 02:07 PM, Burton, Ross wrote:
On 13 November 2014 12:59, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
I can't find anything that attempts to start anything. There's nothing in
inittab, and there's nothing in rc3.d that resembles an at
On 11/13/2014 02:10 PM, Mike Looijmans wrote:
Next challenge is to calibrate the touch screen...
Hmm. That's a big disappointment.
I've been using "ts_calibrate" in the past, and that worked just fine on this
board.
Sato uses an X application for this, and it'
On 11/13/2014 02:28 PM, Burton, Ross wrote:
Hi,
On 13 November 2014 13:19, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
I've been using "ts_calibrate" in the past, and that worked just fine on
this board.
Modern X servers don't use tslib, s
On 11/13/2014 02:54 PM, Mike Looijmans wrote:
On 11/13/2014 02:28 PM, Burton, Ross wrote:
Hi,
On 13 November 2014 13:19, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
I've been using "ts_calibrate" in the past, and that worked just fine on
this boar
On 11/13/2014 06:58 PM, Michael Gloff wrote:
On Thu, Nov 13, 2014 at 7:28 AM, Burton, Ross mailto:ross.bur...@intel.com>> wrote:
Hi,
On 13 November 2014 13:19, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
I've been using "ts_calibrate" i
f it can not work, can we do that differently?
Thanks
Urs
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail
unt at another location while still preserving the default contents.
I hope I'm making sense here.
Thanks,
Matt S.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+
s would be
managing that the build system gets properly used.
Currently, these hybrids have to invoke bitbake for each subsystem, probably
needlessly regenerating binaries, and once more for the one image to find them
all and in darkness bind them...
Met vriendelijke groet / kind rega
nel module recipes "kernel-module-XXX.bb".
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: mike.looijm...@t
On 12/11/2014 08:42 PM, Mark Hatle wrote:
On 12/11/14, 12:55 AM, Mike Looijmans wrote:
On 12/10/2014 08:00 PM, Khem Raj wrote:
On Dec 10, 2014, at 10:52 AM, Koehler, Yannick (HP Networking)
wrote:
Can Yocto build for example in a single bitbake call an image for x86,
ppc, arm, others? Or
tava wrote:
Hi
How to add external driver (ex:TFT driver) to core-minimal-image.
After building core -minimal-image, in case I need to add additional
package to existing image, do i need to modify in .conf file and REBUILD
IT..every time ?
please clarify !
Thank you
--
Mike
doing the emulation in user
space (libc).
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: mike.looijm...@t
t repository, so you can us that as your
repository for making changes too. Instead of pushing your work, use git
format-patch to output the patches (into the bitbake recipe path). When you
build the kernel, the git repo will contain your patches as commits.
Met vriendelijke groet / kind
o list files have a UID greater than
99."
+ exit 1
+ fi
echo >&2
fi
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon:
cy. Make the config package RDEPEND on "A". Images that install the
config (which they have to do anyway according to your description) will then
automatically install "A" which at least accomplishes that you don't need to
specify both.
I've been in the same p
ilable in
the PATH:
DEPENDS += "dbus-c++-native"
(though your moving of the binary into a "dbg" package might disturb that. I'd
create a "utils" package for it)
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683
Staff Engineer, Firmware
SIERRA WIRELESS
Direct +1 604 233 7989 :: Fax +1 604 231 1109 :: Main +1 604 231 1100
13811 Wireless Way :: Richmond, BC Canada V6V 3A4
[M1]
dwatk...@sierrawireless.com :: www.sierrawireless.com ::
www.inmotiontechnology.com
Kind regards,
Mike Looijmans
System Exp
xtra diagnostic. Oh dear, just what we need, yet
another switch...
M.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: ww
n a
“read-only” image is specified by the build script?
__ __
Thanks.____
__ __
--
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69
If so, how would I go
about configuring it?
No, it's not related to autofs or aufs or whatever. It's plain simple udev or
mdev.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon:
en, informieren Sie bitte sofort den Absender und löschen Sie diese>> Nachricht. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser>> Mail>> ist nicht gestattet.>>>> This e-mail may contain confidential and/or privileged information. If you>> ar
sts it needs doing (send data and even executables, run shell commands, and get reliable feedback on process completion).One test PC can control multiple boards (each board needs two USB connectors in this setup).I'd also be interested to know what other projects are doing
e software, maybe you can use a QEMU machine?
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the e
regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
-- Forwarded
I would not write to flash media in this test. It's pointless, if you can read
the the device, it means that you can already send commands and data to it,
and reading will thus test data going in both directions already. Writing to
the media will just wear it out, and if there's a problem unmoun
On 20-08-18 09:40, Joe Steeve wrote:
On Thu, 2018-08-09 at 21:43 +0100, Richard Purdie wrote:
Even if you just look at the fields the project is used in based on the
project's members like Comcast, the automotive industry (e.g.
Automotive Grade Linux), several major OS vendors (Windriver, Mentor
On 24-09-18 23:01, Paul Eggleton wrote:
On Monday, 24 September 2018 3:02:28 PM NZST Hussin, Mohamad Noor Alim wrote:
...
Otherwise I agree with Mike's reply, we should avoid writing to the storage
device as part of the test.
It is mean that just do test like mount and unmount only? To read
Sometimes the problem is that parts of the underscored function name are seen
as overrides, so you should try using "mysetcapfunction" instead as a name.
Also, there's a semicolon missing:
ROOTFS_POSTPROCESS_COMMAND += "my_setcap_function;"
On 12-11-18 14:09, Markus W wrote:
> Thanks Uwe!
>
>
+1
Got lapack to compile, but no such luck with any "blas" package (like
openblas). And that's a requirement for octave, which was what I was aiming at.
I'll share some recipes, tomorrow or so (today is stuffed with other work).
On 23-01-19 22:39, Philip Balister wrote:
> I care :)
>
> On 01/
On 08-02-19 17:02, Mauro Ziliani wrote:
> Hi all.
>
> I know this is a VERY dangerous operation, but I'm curious.
Depends on your definition of "dangerous".
> Is it possible to upgrade the kernel & dtb from debian package in Yocto?
Sure, doing it all the time (from ipk, but that shouldn't matte
As for the particular case of /mnt, on most images, /mnt is a symlink to
/media, and /media is (on) a filesystem in RAM, so it's already writeable.
If the write does not need to persist across reboots, use a tmpfs mount.
If your real problem is that you cannot create anything in /mnt (or /media
Two products sounds like two machines. Just create a machine.conf for each
product (even if they use similar hardware), then you don't need overrides
elsewhere.
OE/Yocto is smart enough to figure out what needs to be (re)built. Some OE
projects build the same image(s) for over 40 machines (and
the above. I'll probably set the tmpdir to something like
> "tmp_DISTRO_MACHINE"
> to avoid different configs stepping on each other.
>
> Does this seem like the proper way to do things?
>
>
>
> On Wed, Feb 13, 2019 at 11:18 PM Mike Looijmans <mailto
On 19-03-19 11:26, Arunkumar V wrote:
> HI
>
> can any one explain me how to config the /home/root as writable in read-only
> rootfs?
>
> is any setting to do with local file or .bbclass?
> if any macros need to be enable, please
>
You can mount something writeable on top of /home/root to acc
On 26-03-19 12:31, jairo wrote:
>
> Thank you very much Mike.
>
>
>
>> With NAND you'll probably have a filesystem (jffs2 or UBI) in place.
>> With that, you could just use a package manager like opkg to update
>> sofware. If the box has a network connection, just running "opkg
>> update && opk
On 26-03-19 11:02, jairo wrote:
> El mar, 26-03-2019 a las 09:14 +0100, Patrick Boettcher escribió:
>> On Tue, 26 Mar 2019 09:05:47 +0100
>> jairo wrote:
...
> Yes, I know, it is somewhat risky, but I have only 512MB of nand
> memory, and we are getting a lot of software. I think we have to
> eval
nd "yet another tool"...
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the environme
complete deploy/images NOT deleting tmp/? It
> compiled overall (in two steps) > 10h. Do I need to touch some file?
>
if you keep your sstate-cache directory then delete tmp/ dir is what you
need
to do. Rebuilding from sstate-cache is very quick
> Thank you,
&g
ael...@bmw-carit.de>
Web: http://www.bmw-carit.de
BMW Car IT GmbH
Gechäftsführer: Kai-Uwe Balszuweit und Alexis Trolin
Sitz und Registergericht: München HRB 134810
---
On 23-09-17 00:51, Joshua Lock wrote:
On 22/09/17 15:00, Mike Looijmans wrote:
I think this remark in the referenced link is the best summary of "what
could be improved":
"""the biggest weakness of the sstate signature bits, in my opinion, is that
it only tracks inp
just use a script that copies the newer files
over to the hosting.
It's also a much better option security wise.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: m
inute filesystem cleanup.
However, in most cases it's much better to determine what recipe puts the
files there and modify the recipe or remove the package. It would help a lot
if you would reveal what files you want to remove and why.
Kind regards,
Mike Looijmans
System Expert
TOPI
share it.
ROOTFS_POSTPROCESS_COMMAND seems to be buggy.
thank you
On Tue, Dec 12, 2017 at 1:58 PM, Mike Looijmans <mailto:mike.looijm...@topic.nl>> wrote:
On 11-12-17 15:18, Sherif Omran wrote:
i want to create a recipe to clean some files from the rootfile
syst
gegroup-base-extended
${CORE_IMAGE_EXTRA_INSTALL}"
#IMAGE_INSTALL = "${CORE_IMAGE}"
#inherit core-image
my_postprocess_function() {
rm -r ${D}${bindir}/init.d/psplash.sh
}
ROOTFS_POSTPROCESS_COMMAND += "my_postprocess_function; "
On Wed, Dec 13, 2017 at 7:22 AM, Mike
e in fstab gets mounted on boot. Does anyone know why
my new entry doesn't?
Wild guess: "/mnt/drive" does not exist yet when the fstab is processed during
startup. That will cause mount to fail.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 R
just pointed to the same sstate-cache directory, so they could share
whatever they want.
Would that work? I'd think so, but never dared to actually make it so...
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
T
on-company assets as RO, I
shouldn't tag poky, meta-openembedded nor meta-xilinx (or should I? Is
this where I use git's lightweight tagging as opposed to annotated
tags?) When "everything is tagged/branched", does that somehow include
tagging the non-company as
s only and have no useful meaning
in version management. The git hash is the "technical" version number. Create
a table somewhere to map the commercial version number to a git hash. The
simplest implementation is to "tag" the version numbers in the top-level
repository.
K
opkg upgrade'"
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the enviro
On 16-12-16 17:58, Khem Raj wrote:
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the
git.cgi/meta-virtualization/tree/recipes-c
ore/sysvinit/sysvinit-inittab_2.88dsf.bbappend?h=dizzy - but the app isn't
in DISTRO_FEATURES. (Right or wrong.., I include it in the image with a
"CORE_IMAGE_EXTRA_INSTALL +=" in my image recipe).
Any suggestions on how to make this inittab a
conds, but shutdown takes
over 5 seconds...)
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
Website: www.topicproducts.com
Please consider the enviro
On 20-01-17 07:15, Michael Gloff wrote:
Mike,
On Thu, Jan 19, 2017 at 3:18 AM, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
On 18-01-17 16:10, colin.helliw...@ln-systems.com
<mailto:colin.helliw...@ln-systems.com> wrote:
We have a configuration for
s to install
both init.d script and .service in its do_install, yet only one or the other
ultimately shows up in the rootfs..? (Relates to my other question about how to
determine the init type in do_install)
I suspect that "inherit systemd" is taking care of that.
Kind reg
On 21-01-17 13:41, Leon Woestenberg wrote:
Hello Mike,
On Fri, Jan 20, 2017 at 3:27 PM, Mike Looijmans mailto:mike.looijm...@topic.nl>> wrote:
An no one (except one of the systemd folks) has come up with a program
that just waits for the the processes to finish (with a timeou
ault setup.
I would at least have expected network support to be enabled for any machine
that has some networking features.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mik
On 28-03-17 10:39, Burton, Ross wrote:
Krogoth (2.1) isn't the latest, that's Morty (2.2) released in October 2016
and next month Pyro (2.3) is being released.
So what happened to the missing two walker bots?
:-)
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Mate
the same image, since that would recursively include itself,
but you could make big-image.bb like this:
require small-image.bb
IMAGE_INSTALL += "big-project"
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefo
gure was passed
unrecognised options: --with-idn [unknown-configure-option]
+PACKAGECONFIG[libidn] = ""
+# but it still has the libidn dependency, without this option
+EXTRA_OECONF += "--disable-crywrap"
+
+# This version doesn't support this option added in newer gnutls
your machine to
something close to the real world, and usually this solves it.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijm...@topicproducts.com
We
just for that.
Our build server keeps a single sstate-cache for about 30 projects, with 4
versions of OE, 3 distros, and a dozen MACHINE configs. No problems encountered.
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Tel
On 19-05-17 13:47, Mike Looijmans wrote:
On 19-05-17 03:43, Paul D. DeRocco wrote:
If I'm doing multiple unrelated Yocto based projects, and they use the
same version of Yocto, and the same metadata (except for my own layers),
am I right in assuming that I can share everything in
19 20:01, Philip Balister wrote:
> Sounds like we need a layer for packages that needs fortran enabled and
> collect out work there.
>
> Philip
>
> On 01/24/2019 05:31 AM, Mike Looijmans wrote:
>> +1
>>
>> Got lapack to compile, but no such luck with any "
The version of your OE layer is all the version that you'll ever (technically)
need. That version (usually a git hash) dictates all other versions.
When asked for version numbers of included packages, I always just dump the
manifest file into their lap.
You can also ask and report the version n
o_install_append() {
find ${D}${libdir}/python${PYTHON_MAJMIN}/ -name '*.py' -remove
}
Removing the ".py" files roughly cuts the disk space in half.
The "src" approach works on any package, and has the advantage that you can
still install the source files
I ran into this issue yesterday, and this patch solves the compilation on
warrior. However, it's a patch for Qt itself, and not for OE.
Is there already a warrior patch in the making, or should I submit one?
On 19-11-19 13:37, Quentin Schulz wrote:
> At least since gcc v8, source code with asm
Without your recipe source code, no one can tell for sure, but I suspect you
have something like a "DATE" in there that evaulates to a different value if
you run it a second later.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Ma
89 matches
Mail list logo
