On 11/13/2014 02:28 PM, Burton, Ross wrote:
Hi,
On 13 November 2014 13:19, Mike Looijmans <mike.looijm...@topic.nl
<mailto:mike.looijm...@topic.nl>> wrote:
I've been using "ts_calibrate" in the past, and that worked just fine on
this board.
Modern X servers don't use tslib, so this won't work since we stopped using
kdrive about two years ago.
Maybe, but it demonstrates that the hardware and drivers are working just fine.
DEBUG: Adding click 0 (X=1023, Y=599)
DEBUG: Adding click 1 (X=607, Y=599)
DEBUG: Not adding click 2 (X=1023, Y=599): within 7 pixels of previous click
DEBUG: Not adding click 2 (X=1023, Y=599): within 7 pixels of previous click
DEBUG: Not adding click 2 (X=1023, Y=599): within 7 pixels of previous click
Well, it's not within seven pixels is it... I wonder if there's a bug in the
logic. It might be worth bumping the xinput-calibrator revision to the latest
commit in the upstream git repo in case this has been fixed already there.
Tried, but that did not help, same problem.
I bought a HDMI display with an integrated touchscreen to test this sort of
thing, but the device was so dodgy that it often caused the kernel to hang on
boot...
I have one of those attached to the system as well. Explaining that I have two
touch screens might be a bit of a challenge though, so I started with the
little LVDS screen first.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: mike.looijm...@topic.nl
Website: www.topic.nl
Please consider the environment before printing this e-mail
Visit us at Bits & Chips Smart Systems 20th November, 1931 Congrescentum
Brabanthallen 's-Hertogenbosch, stand number 34
http://bc-smartsystems.nl
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
