I've been successfully tunneling my VNC connection between my Windows 2000
box at work and my RedHat 9 box at home. Both sides are using TightVNC. I've
used TVNC 1.2.9 and 1.3-Dev5 at work and now, for some strange reason today,
when I try to connect via an SSH-tunneled session (using PuTTY per
htt
-
From: Jerome R. Westrick [mailto:[EMAIL PROTECTED]
Sent: Monday, October 18, 2004 2:04 PM
To: '[EMAIL PROTECTED]'
Subject: Re: Help -- Can no longer tunnel!
On Mon, 2004-10-18 at 19:27, John Aldrich wrote:
> I've been successfully tunneling my VNC connection between my Windo
How do you connect to the internet? DSL/Cable-modem? I'm guessing that you
either use dial-up or have a router for cable or DSL. What you need to do is
forward port 590x on your router's external IP address to 192.168.0.4.
If you give us more details about how your home LAN is connected to the
in
connection to the
other pc. Yes, that I already heard from somebody bud how do I do that. I
ame working with windows Xp home
>From: John Aldrich <[EMAIL PROTECTED]>
>To: "'julien ertveldt'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: RE: acces vnc s
Well, this is too strange. One of the fellow list-members helped me test my
system out and it started working again, so I don't know what the issue was,
but it's working now...
Thanks to everyone for their help!
___
VNC-List mailing list
[EMAIL PROTECTE
Quick refresher of my problem -- I've been using a tunnelled TightVNC
session to view my desktop at home (RedHat 9) from my PC at work (Windows
2000 Pro.) It worked up until Monday when for some strange reason it stopped
working, then just as mysteriously, it started working again Monday
afternoon
ginal Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of John Aldrich
> Sent: Tuesday, October 19, 2004 14:48
> To: RealVNC List (E-mail)
> Cc: VNC List (E-mail)
> Subject: Tunneling problem -- SOLVED!!!
>
>
> Quick refresher of my problem --
Both machines need to be connected to the internet or somehow already be
reachable to each other. To ping, go to a dos prompt and type "ping
" or "ping " If you are not already
connected to the internet when you try to connect via VNC, that would cause
the "unable to connect" issue you report.
---
Your router at home is probably blocking the connection. You need to enable
at least ports 5901 and/or 5801 through your router and point it to your
machine at home. Once you do that, it *should* work. I would suggest,
though, that running VNC and having that port open to the outside world is
askin
What you want to do is tell your router to forward port 9001 to one
computer's port 9000 and 9002 to port 9000 on the other one. If I had more
than one PC running VNC server, I could easily do that with my Linksys
router.
John
-Original Message-
From: Nestor A. Angel [mailto:[EMAIL
Make sure you have a .vnc/xstartup something like this:
#!/bin/sh
# Red Hat Linux VNC session startup script
exec /etc/X11/xinit/xinitrc
The above is taken from my RedHat 9 box, but it ought to be similar. I'm
guessing you're talking about not having a window manager on the linux box
from your d
a
terminal window.
How can I make it load up automatically at startup?
Yigal
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>Behalf Of John Aldrich
>Make sure you have a .vnc/xstartup something like this:
>
>#!/bin/sh
>
># Red Hat Linu
Thom:
The easiest way to secure VNC is to tunnel it over SSH, whether that be
PuTTY or something else. There's an easy "how-to" at
http://www.benjamin.weiss.name/putty-tunnel.html for PuTTY and VNC. That's
what I use to connect to my linux box at home over the internet... And
here's the script I us
To find out what your WAN IP is, fire up your PC and point a browser to
http://www.whatismyip.com If you don't have a static IP, you may want to use
a free dynamic DNS provider, such as no-ip.com, or dyndns.com. That way you
can always know what your IP is by just using a machine name with one of
t
Try port 23... that's the SSH port. If you're not using it, there's a chance
it'll work.
-Original Message-
From: Jon Brookes [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 21, 2004 4:46 PM
To: [EMAIL PROTECTED]
Subject: (no subject)
Hi all.
Need a bit of help with realVNC and p
he vncserver command from a
>terminal window.
>How can I make it load up automatically at startup?
>
>Yigal
>
>
>
>
>>-Original Message-
>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On
>>Behalf Of John Aldrich
>
>>Make sure you hav
orks, but only after I executed the vncserver command from a
>>terminal window.
>>How can I make it load up automatically at startup?
>>
>>Yigal
>>
>>
>>
>>
>>>-Original Message-
>>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECT
I don't know about *BSD, but under Linux, you need to have a ~/.vnc/xstartup
file that looks something like this:
#!/bin/sh
# Red Hat Linux VNC session startup script
exec /etc/X11/xinit/xinitrc
I suspect there is similar verbage in *BSD.
John
-Original Message-
From: Tony [mail
http://faq.gotomyvnc.com will help you quite a bit.
-Original Message-
From: Charles Smith [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 24, 2004 6:55 PM
To: [EMAIL PROTECTED]
Subject: tunnel
Could somebody explain how to tunnel through the router to our server this
computer in this c
James... for support on TightVNC you can join the TightVNC list. I'm on both
lists myself... Here's the list subscription website for TightVNC:
https://lists.sourceforge.net/lists/listinfo/vnc-tight-list
also, I don't know if you've checked it out, but there's a FAQ for
VNC/TightVNC (it's more rel
You're probably using a "non-routeable" address on the LAN at work. What you
need to do is 1)make sure you don't have a firewall between your machine at
work and the internet. If you do, you'll need to make a way for VNC to reach
your machine at work through the firewall (security hole.) 2) Find ou
Maybe... it's *possible* you'll be able to do it with the web-based client.
-Original Message-
From: SnS Processing [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 28, 2004 5:30 PM
To: [EMAIL PROTECTED]
Subject: General help starting with the two computers
Ok, this is what I wa
Then that's probably the reason you're having problems. I suggest you
download and run SpyBot S&D and/or Ad-Aware SE. Both are free and both do a
pretty darn good job of cleaning spyware. I typically use both (one right
after the other...) and they seem to co-exist pretty well. Just my 2" (US).
he old VT terminals
would all connect back to one box.
I hope I answered your questions. A lot of what you want to know is in the
faq at http://faq.gotomyvnc.com
John Aldrich
___
VNC-List mailing list
[EMAIL PROTECTED]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list
At least with my Linksys router it was fairly easy... In the web page
configuration is a section on port forwarding. Simply put the port you want
forwarded and the IP you want it forwarded to. That's all there was for me.
That's how my Linksys router is configured to run SSH to my linux box.
-
XP SP2 has a built-in firewall, you know... you have to specifically permit
VNC to pass through. This is a "known issue".
John
-Original Message-
From: Ken Korshin [mailto:[EMAIL PROTECTED]
Sent: Friday, October 29, 2004 3:11 PM
To: [EMAIL PROTECTED]
Subject: (no subject)
First,
I did some googling on the "toredo tunneling" and found that it's an IPV6
tunnel installed semi-automagically by Microsoft.
Instructions on how to remove:
http://techies.co.za/phpBB2/viewtopic.php?p=5427
-Original Message-
From: Ken Korshin [mailto:[EMAIL PROTECTED]
Sent: Friday, October
Glad to help. :-)
-Original Message-
From: Sam Kader [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 31, 2004 5:07 PM
To: [EMAIL PROTECTED]
Subject: Re: Accept Socket Connections: Option not applying.
spyware was the problem after running spybot it fixed the problem.
Thanks,
Sam
John
You can do it that way, or you can point port 5901 to port 5900 on the
second server. You don't have to have a 1 to 1 mapping on the port numbers.
You don't even have to have the "usual" port numbers open on your router. As
long as you can tell VNC to connect to a certain port on a certain address
Err... probably not. The way it works (for connecting to a linux box, at
least, and probably for a windows->windows connection) is that you use the
"loopback" address and the correct "desktop" / port number for the system
you're trying to view. i.e. if you're trying to view the "first" Windows
desk
I'll try to answer your questions in-line here...
-Original Message-
From: tyler flood [mailto:[EMAIL PROTECTED]
Sent: Monday, November 01, 2004 9:31 PM
To: [EMAIL PROTECTED]
Subject: Once Again - Router Questions
I have read a ton of messages trying to figure this out...I am almost out
Check the Windows XP firewall for error messages. You probably need to
permit port 5800 in the XP firewall as well. Unless you disabled the XP
firewall, you now have two software firewalls running on your PC there.
-Original Message-
From: Michael Rosen [mailto:[EMAIL PROTECTED]
Sent: Tues
om: tyler flood [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 02, 2004 8:35 PM
To: John Aldrich; '[EMAIL PROTECTED]'; [EMAIL PROTECTED]
Subject: RE: Once Again - Router Questions
Thanks to those who replied about my setup questions...
I think I forwarded my linksys WRT54G router to prope
This is a FAQ. You can find it on http://faq.gotomyvnc.com
Basically it involves some registry editing. There are some apps that will
make it easier for you, but I've not been able to even get a trial version
to work for me...so I just ended up editing the registry.
John
-Original Me
You could always "nominate" that as a FAQ in the "faq.gotomyvnc.com" page...
They *do* take suggestions there.
-Original Message-
From: Valis Keogh [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 03, 2004 11:11 PM
To: Asher, Scott; [EMAIL PROTECTED]; [EMAIL PROTECTED];
[EMAIL PROTECTED
Try vncviewer :55 to see if that works. Typically
you don't put the port number in, you put the *display* number in that
you're trying to connect to... in this case, it's display 55. I don't know
if the Java viewer would be the same way or not... I don't use it myself.
John
-Original
Marjorie:
I've experienced this behavior with my machine at home. It seems to be
related to Flash Animation. Pages with Flash in them seem to cause Mozilla
to just shut down. I wish I knew why. FWIW, I'm using a variant of VNC at
work and at home, so things might be a bit different.
-Original
You're welcome. I'm not sure if this is a problem with VNC or Flash or
Mozilla, but it's a real problem, all right.
-Original Message-
From: Marjorie Wake [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 09, 2004 8:43 PM
To: John Aldrich
Cc: [EMAIL PROTECTED]
Subject: Re:
Salvatore:
X:0 is the default local desktop. MOST VNC apps will not let you view the
local desktop. There is another app, I think it's called something like
X4VNC which will let you view the local desktop (the same behavior as
Windows) but that's designed specifically for what you're wanting.
Try this -- from a dos prompt on the "client" machine go to a dos prompt and
type "nbtstat -a " and see if it comes up. Also, are you
running WINS? If so, make sure you can see those machines from your WINS
server. If not, then you're going to have to find some other way to know
what IP each machin
I can attest to the fact that they are NOT incompatible, as far as
interfering with each other. Again, as Viv mentioned, you can't use VNC to
talk to PC Anywhere or vice versa, but they don't conflict.
-Original Message-
From: Zach Dennis [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November
Yes, it can be done. The hard part is identifying what IP address the remote
PCs are getting on your LAN, when they connect via VPN. As long as they are
on the LAN, even through VPN, assuming no XP firewall or something like
that, you should be able to VNC into them.
John
-Original Mes
Make sure you get the IP of the VPN adapter, not the NIC.
-Original Message-
From: Romel Ornedo [mailto:[EMAIL PROTECTED]
Sent: Friday, November 19, 2004 12:02 PM
To: John Aldrich; [EMAIL PROTECTED]
Subject: RE: VNC thru VPN
if i tell the guy on the remote computer to do "ipconf
How about a "sleep" command in the batchfile, say "sleep 30" or something
like that to give WinVNC time to launch.
-Original Message-
From: Andrew Borland [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 30, 2004 1:00 PM
To: [EMAIL PROTECTED]
Subject: Re: Simple .exe a remote client can r
Can you say "Hoax"? There is NO "email tracking program". You cannot get
money for forwarding emails. This is just spam, pure and simple!
___
VNC-List mailing list
[EMAIL PROTECTED]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/li
With MS Windows, you are controlling the local console. That's just the way
things work. Windows is designed to be used by a single user at a time.
'Course you can do other things, like print, share files, etc off that
machine at the same time, but only one person can be actively "using" the
PC. Un
e became more line VNC on
*nix, so that you could have virtual desktops with VNC.
-Original Message-
From: Feico de Boer (ML) [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 08, 2004 9:17 AM
To: John Aldrich
Cc: 'Robert Sohigian'; [EMAIL PROTECTED]
Subject: Re: VNC / XP Profess
Telnet 5800 and see if you get any response. If you
get *any* response, chances are you're making it outside of your corporate
LAN. If you *don't* get anything (anything other than "connection timed out"
that is) then you are not getting out of your LAN.
John
-Original Message-
Fr
t. If it works, then you've got
your answer. If it doesn't work, then you probably do NOT have VNC Server
running on your machine and you've got to try these tests again.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 08, 200
I'll make the same offer here... I access my linux box at home through VNC,
but the VNC port is tunneled through SSH, so although I *could* post my
public IP and no one could get a VNC response from my system, I'm not going
to. :-) But if you email me, I'll test it from where I am (our firewall at
Or SSH?
-Original Message-
From: William Hooper [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 08, 2004 2:25 PM
To: [EMAIL PROTECTED]
Subject: Re: OpenSSL and VNC4
Michael Kimbell said:
> Is anyone aware of any versions/patches of vnc that use the OpenSSL (or
> any other free SSL l
Heh... well, I'm sure I'll be here if you change your mind. I'm sure the
other gentleman will probably be here as well. If www.gotomyvnc.com works,
but you still can't get through on port 443, you might give one of us a
shout.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTE
Oh, yeah... VNC by itself is NOT encrypted in any way. I use the method you
describe to connect to my machine at home from work... and I'm reasonably
certain that 1) My boss can't see what I'm doing and 2) No one is
sniffing my VNC traffic and there's no strangers connecting to my VNC
server. BTW,
Good luck!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 09, 2004 4:50 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Re: where's the "VNC through a Linksys firewall" FAQ?
well, i was able to setup a SSH server and run VNC over
Try using the "keep alive" option and send a "keepalive" packet every few
minutes (say 5 minutes or so.) I used to have that problem until I enabled
the "keepalive" packet. I think it may be my router settings at home causing
the DSL connection to be shut down. I can always reconnect, but it's a pa
No, that shouldn't kill the SSH daemon, only maybe allow your router to
"hang up" the call to your DSL provider.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, December 10, 2004 1:43 PM
To: John Aldrich; [EMAIL PROTECTED]
Subject:
You'll need to 1) figure out what your router's external IP address is at
the time you're trying to connect from outside and 2) use THAT IP address
(instead of the 192.168.1.x IP) when you're trying to connect. You cannot
use the 192.168.1.x IPs on the internet, as they will not route.
There are
You can't use 192.168.x.x IPs when connecting from outside your LAN. You
have to know the IP address of your DSL router. You also have to enable
port-forwarding and forward say, port 5900 to a particular machine on your
LAN. That is, port 5900 on your router needs to be sent to port 5900 on
192.168
VNC does not work this way. What you *can* do is change some of the server
options, such as the color depth, etc so that it requires less bandwidth.
That should speed things up.
-Original Message-
From: Matt Thompson [mailto:[EMAIL PROTECTED]
Sent: Friday, December 17, 2004 1:10 PM
To: [E
Known problem with KDE and Gnome at the very least... Neither window manager
likes to have the same user logged in twice.
John
-Original Message-
From: Mauce [mailto:[EMAIL PROTECTED]
Sent: Sunday, December 19, 2004 5:32 AM
To: [EMAIL PROTECTED]
Subject: Gnome: theme sharing
Hi,
I'm wondering if switching to RealVNC would solve some problems we're
having... We're using TightVNC 1.2.x here on some windows NT workstations
and when the system goes to reboot, if VNC is installed as a service, we get
an error "OleMainThreadWndName not responding" and we have to end-task
several
Thanks. I'll give that a shot and see if it resolves the problem. 'Preciate
the quick response.
John
-Original Message-
From: James Weatherall [mailto:[EMAIL PROTECTED]
Sent: Monday, December 20, 2004 12:12 PM
To: 'John Aldrich'; 'RealVNC L
Unfortunately, I'm still seeing that error, even with RealVNC 4 installed
and running as a service... Any other ideas, I'll be glad to hear 'em, as
this is a VERY aggravating problem!
-Original Message-----
From: John Aldrich [mailto:[EMAIL PROTECTED]
Sent: Monday, December 2
dns entry updated
automatically, even if the IP address changes. Some routers even support
dynamic DNS providers in the config.
John Aldrich
-Original Message-
From: Rick Johnston [mailto:[EMAIL PROTECTED]
Sent: Monday, December 20, 2004 4:11 PM
To: [EMAIL PROTECTED]
Subject: Need
No, I haven't... I may give that a shot...
-Original Message-
From: Marco Aurilio Carvalho [mailto:[EMAIL PROTECTED]
Sent: Monday, December 20, 2004 5:34 PM
To: [EMAIL PROTECTED]
Subject: Re: OleMainThreadWndName error
Em Seg 20 Dez 2004 19:47, John Aldrich escreveu:
> Unfor
I'm pretty sure I'd disabled the old VNC version. I'll try again, since that
particular user is not in yet.
-Original Message-
From: James Weatherall [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 21, 2004 5:42 AM
To: 'John Aldrich'
Cc: 'Real
See if running VNC as a 'service' will help... All the machines I am in
charge of run VNC as a service and I have no problem logging into NT/2000
boxes that either have a locked screen or have been logged out.
-Original Message-
From: Lyndia M. Oudeh [mailto:[EMAIL PROTECTED]
Sent: Tuesday
I'm using TightVNC on my machine at work and RealVNC on my linux box at
home. Here's the script I use to launch the VNC Server:
vncserver -depth 8bpp -geometry 1024x768 -nevershared -localhost
For some reason, whenever I switch to an active Mozilla window, the display,
except for the active Mozill
ginal Message-
From: James Weatherall [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 04, 2005 10:33 AM
To: 'John Aldrich'; 'RealVNC List (E-mail)'
Cc: 'VNC List (E-mail)'
Subject: RE: Wierd behavior
John,
The problem is probably that in 8bpp mode, the X server will
http://www.gotomyvnc.com which will allow you to test your VNC to see if the
ports are open. Also, you could try checking with ComCast to see if they are
blocking port 590x and 580x. Or you could use a VPN or ssh-like app (i.e
stunnel or Zebedee) to tunnel the vnc connection between work and home.
Actually, I'm running in 24-bit color in X. I like having maximum color
depth when I'm on the local console. Would you like me to post my xorg.conf?
:-)
-Original Message-
From: James Weatherall [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 04, 2005 11:44 AM
To: &#x
day, January 04, 2005 3:28 PM
To: John Aldrich
Cc: 'RealVNC List (E-mail)'; 'James Weatherall'; 'VNC List (E-mail)'
Subject: Re: Wierd behavior
because of memory alignment issues, you shouldn't use 24-bit color with
vnc.
using it will cause a significant perform
Nope, and it pretty much ONLY happens on NT4 Workstation.
-Original Message-
From: James Weatherall [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 05, 2005 1:08 PM
To: 'John Aldrich'
Cc: 'RealVNC List (E-mail)'
Subject: RE: OleMainThreadWndName error
John,
yes. Works fine. At least that's what Fedora Core 3 is using (XOrg and
RealVNC)
-Original Message-
From: Dave Nebinger [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 06, 2005 3:37 PM
To: VNC-List@realvnc.com
Subject: VNC + X.org works at all?
Before I go through the hassle of replacin
Can you hard-code an IP for the MAC? What about hard-coding IP addresses in
the rest of the machines you want to access using VNC? I only have two
machines on my LAN at home, and my situation is a bit different -- I'm
behind a NAT router which is also a 4-port network switch. But if I need to
acces
-Original Message-
From: PicaRules [mailto:[EMAIL PROTECTED]
Sent: Monday, January 10, 2005 2:23 PM
To: vnc-list@realvnc.com
Subject: RE: Getting past *two* NAT routers
John,
The DSL/PPPoE "modem" itself is the one-port NAT "router." It has my account
info (DSL user ID & pw) stored in it
Yes, changing the netmask from .252 to 0 should give you 254 *useable*
addresses (1 "gateway" IP and one "broadcast" IP on top of 254 "useable" IPs
for a total of 256.) Now, whether or not your ISP will allow you to do that
is another question.
-Original Message-
From: PicaRules [mailto:[
0, 2005 5:50 PM
To: John Aldrich; vnc-list@realvnc.com
Subject: RE: Getting past *two* NAT routers
>Now, whether or not your ISP will allow you to do that
is another question.
I didn't think they would have any way of knowing how many IPs the LAN side
had, as long as the PPPoE connection
PicaRules:
Just a thought here, but does ZyXEL provide flash-images you can use to
re-flash your modem/router? If so, maybe you can get back some of the
functionality that has been removed by re-flashing the router/modem.
John
-Original Message-
From: PicaRules [mailto:[EMAIL PROTE
My suggestion is this: Disable any new clients when you're there in the
office and tell him that "during normal business hours, you call and ask me
to re-enable VNC. After hours, you will just connect." We have a similar
situation here with our Fraud Prevention department -- the head of the
departm
I'm not that familiar with Windows XP, but maybe you can tell it to use DNS
for lookups instead and run an in-house DNS server behind the firewall to
handle this for you?
John
-Original Message-
From: Arun [mailto:[EMAIL PROTECTED]
Sent: Sunday, January 16, 2005 6:18 PM
To: Angelo
Sounds like the problem is not the viewer, but the server. That description
typically means you don't have a window manager running. Not being familiar
with Debian or how it starts VNC, I can only say that RedHat/Fedora have the
following script in ~/.vnc:
#!/bin/sh
# Red Hat Linux VNC session st
And why can't you make them log out and log back in the old-fashioned way
instead of using FUS?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 18, 2005 10:01 PM
To: vnc-list@realvnc.com
Subject: (no subject)
Hi,
I'm just wondering when suppor
To the best of MY knowledge, this is true. However, by the judicous use of
regedit you can disable the tray icon entirely. There are some 3rd-party
apps, I believe, that'll also disable the tray icon for you. You can check
"http://faq.gotomyvnc.com"; and look up the info there.
John
-O
Disable the XP firewall on your parent's machine and get them to use a NAT
router instead. It's a heck of a lot more secure anyway!
John
-Original Message-
From: Phillip Bennett [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 19, 2005 11:07 PM
To: vnc-list@realvnc.com
Subject: C
work is, so I don't have to
worry about it. :-)
John
-Original Message-
From: Phillip Bennett [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 20, 2005 9:41 AM
To: 'John Aldrich'
Subject: RE: Connection problems
John I have disabled and they are using a netgear wireless router.
al Message-
From: Phillip Bennett [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 20, 2005 10:00 AM
To: 'John Aldrich'
Subject: RE: Connection problems
John,
I'm not trying to connect thru the vpn connection when attempting to
connect with my parents. I did use the link yo
You have to have more than port 80 forwarded. You also have to have a second
port for the RFB, as I understand it. I think if you read the archives of
this list, you'll find several people trying to do this. Also, the firewall
at work may block by protocol, such that ONLY http will work on port 80.
http://www.whatismyip.com and find out what your external IP is and then try
again using that IP.
also, you don't give any details on what O/S, revision, etc you are using.
Also, what about firewalls (hardware and software)?
John
-Original Message-
From: Mike Minor [mailto:[EMAIL
nge/response
systems, almost as much as I hate spam! :-)
-Original Message-
From: Mike Minor [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 26, 2005 1:20 PM
To: John Aldrich; VNC-LIST@realvnc.com
Subject: Re: (no subject)
John... Good point.
My pc running the vnc server is an XP pro
How have you got the port-forwarding configured? Are the ports just open or
do you have port-forwarding configured? Any firewalls on the server PCs? If
these are XP machines, make sure you have Fast User Switching disabled as
well as disabling the Remote Desktop (although I believe Enterprise has a
address now, I receive the error message "Unable to connect to
host: Connection refused (10061)" Does this give us a clue here as to what
the problem is?
-Original Message-
From: John Aldrich <[EMAIL PROTECTED]>
Sent: Jan 26, 2005 11:09 AM
To: 'Mike Minor' <[EMAIL P
One small correction. The default port is 5900. 5800 is for the Java client.
-Original Message-
From: B. Scott Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 26, 2005 4:53 PM
To: Chip & Lesley Theriault
Cc: vnc-list@realvnc.com
Subject: Re: Problem with linksys router
I assume
No biggie. We wouldn't be human if we didn't make mistakes once in awhile.
:-)
-Original Message-
From: B. Scott Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 26, 2005 5:32 PM
To: John Aldrich
Cc: Chip & Lesley Theriault; vnc-list@realvnc.com
Subject: Re: Proble
re intended only for the named
recipient/s and may contain confidential information. If you are not one of
the intended recipients, please do not duplicate or forward this e0mail
message and immediatley delete it from your computer.
- Original Message -
From: "John Aldrich"
you have some more insight?
Thanks for your help!
_
From: B. Scott Smith [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 26, 2005 5:32 PM
To: John Aldrich
Cc: Chip & Lesley Theriault; vnc-list@realvnc.com
Subject: Re: Problem with linksys router
My bad - typo on my part. I&#x
e-mail and any attachements to it are intended only for the named
> recipient/s and may contain confidential information. If you are not one
> of the intended recipients, please do not duplicate or forward this e0mail
> message and immediatley delete it from your computer.
>
> - Origi
It looks like it only created x:0 and you are trying to connect to the third
virtual terminal (x:2). Try x:0
-Original Message-
From: sasa [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 27, 2005 3:58 PM
To: vnc-list@realvnc.com
Subject: Not view a desktop
Hi, I have installed vnc-serv
necting to the VNC
server session that could be fixed fairly easily.
John
-Original Message-
From: sasa [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 27, 2005 4:41 PM
To: John Aldrich; vnc-list@realvnc.com
Subject: Re: Not view a desktop
"John Aldrich" wrote:
>
Here's my ~/.vnc/xstartup file from Fedora Core 3
+-+-+
#!/bin/sh
# Red Hat Linux VNC session startup script
exec /etc/X11/xinit/xinitrc
+-+-+
Maybe it'll work for you.
-Original Message-
From: sasa [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 27, 2005 4:57 PM
To: Jo
1 - 100 of 699 matches
Mail list logo
