Paul Menzel wrote:
Am Freitag, den 25.12.2009, 13:38 -0800 schrieb VDR User:
[…]
However, in my case since VDR is my main tv/media source, it would be
annoying to have to boot the computer every time someone wanted to
watch/listen to something, therefore the box stays on 24/7. Thus,
never hav
VDR User wrote:
On Wed, Dec 16, 2009 at 3:03 PM, Calypso Cricket
wrote:
Hi All,
Where does VDR maintain the adapter to channel mapping? Thanks.
Unfortunately it doesn't support this feature. I wish it did however,
believe me!
Actually it does, sort of. If the conditional access field in c
Artem Makhutov wrote:
Hi,
On Wed, Nov 18, 2009 at 10:40:38AM +0200, Lauri Tischler wrote:
Luca Olivetti wrote:
The asus P5N7A-VM motherboard seems a good candidate, is its integrated
9300 graphics powerful enough for good deinterlacing?
P5N7A does not have enough slots :(
Any comments
Luca Olivetti wrote:
The asus P5N7A-VM motherboard seems a good candidate, is its integrated
9300 graphics powerful enough for good deinterlacing?
P5N7A does not have enough slots :(
Any comments about M4N78 PRO ?
___
vdr mailing list
vdr@linuxtv.o
Gavin Hamill wrote:
On Sat, 2009-09-05 at 08:18 -0700, VDR User wrote:
On Sat, Sep 5, 2009 at 6:24 AM, Lauri Tischler wrote:
Somewhat related question is, is there some solution to have
HD-VDR without X, other than eHD ?
Not that I'm aware of but by no means have I researched that questi
Klaus Schmidinger wrote:
Maybe it's ok if I use this opportunity to ask if somebody could
point me to a "complete idiot's guide to installing the eHD software"
(meaning the necessary software that goes into the eHD itself, as
well as the latest version of their plugin). I know, I could search
fo
VDR User wrote:
On Sun, Aug 23, 2009 at 11:24 PM, Lauri Tischler wrote:
Did you know that Klaus is giving VDR a new 24bit OSD? High
resolution/high color will soon be in vanilla VDR, no expensive eHD
card or otherwise required. ;)
That's nice but my main problem with vdr is havin
Seppo Ingalsuo wrote:
On Sun, 2009-08-23 at 09:05 -0700, VDR User wrote:
Did you know that Klaus is giving VDR a new 24bit OSD? High
resolution/high color will soon be in vanilla VDR, no expensive eHD
card or otherwise required. ;)
That's nice but my main problem with vdr is having two telev
VDR User wrote:
> VDR-1.7.8 needs xine-0.9.3.
Well, unfortunately xine-0.9.3 does not exist, yet :)
vdr-xineliboutput does not compile either.
Maybe after the holydayseason is over, september-october...
___
vdr mailing list
vdr@linuxtv.org
http://ww
Lauri Tischler wrote:
> Carsten Koch wrote:
>
>> I did a
>>cd /usr/src/v4l-dvb/linux/include/linux
>>ln -s /usr/src/linux-2.6.27.21-0.1/include/linux/compiler.h .
>>
>> that fixed it.
>
> This has been a problem with all drivers for a long t
Carsten Koch wrote:
> I did a
>cd /usr/src/v4l-dvb/linux/include/linux
>ln -s /usr/src/linux-2.6.27.21-0.1/include/linux/compiler.h .
>
> that fixed it.
This has been a problem with all drivers for a long time,
whenever i grab complete new set of drivers, i need to add
compiler.h to the
Goga777 wrote:
>> There used to be a plugin ,'autosort' i believe, which did
>> some of those things.
>
> http://www.vdr-wiki.de/wiki/index.php/Autosort-plugin
> http://www.copypointburscheid.de/linux/autosort.htm
>
>
> home page of that plugin doesn't work
>
> where is it possible to download
Klaus Schmidinger wrote:
> On 05/23/09 12:44, Carsten Koch wrote:
>> On Sat, 2009-05-23 at 11:47 +0200, Klaus Schmidinger wrote:
>> ...
>>> You could also remove all unwanted channels from your list and set
>>> "DVB/Update channels" to "names and PIDs". Then the EPG scan would
>>> only switch throu
Tony Houghton wrote:
> It would also be nice if
> VDR had a logfile to itself instead of syslog.
Fix your syslogd and RTFM :)
-l level, --log=level
Set logging to level. 0 = no logging, 1 = errors only, 2 = errors and info,
3 = errors, info and debug.
The default logging level is 3.
If logging
VDR User wrote:
> On Sat, May 9, 2009 at 4:05 AM, Gerald Dachs wrote:
>> Am Sat, 09 May 2009 12:38:39 +0200
>> schrieb Klaus Schmidinger :
>>> It also raises several questions:
>>>
>>> - When should such a recording be deleted?
>>> If it gets deleted as soon as replay is stopped, you'll be very
Seppo Ingalsuo wrote:
> Off-topic question:
>
> Are there any (free) EDID binary data editors available that are able to
> edit the CEA block
> http://en.wikipedia.org/wiki/EDID#Extension_Block_Details ?
>
> I'd like to disable 1080i modes from my EDID via CustomEDID option to
> avoid Nvidia d
VDR User wrote:
> On Tue, Apr 28, 2009 at 1:20 PM, Simon Baxter wrote:
>> I've recently taken a different approach altogether.
>>
>> I use MyMediaSystem (mms) as the "front end" to my pvr for dvd, movies,
>> pictures, music, weather, radio etc etc and TV. When you select TV, it
>> launches vdr-xi
Any working/compiling (with VDR 1.7.5) channelscan plugin anywhere ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Rolf Ahrenberg wrote:
> Hi,
>
> new releases of Skinsoppalusikka and RSSReader plugins are now
> available.
One might humbly assume that these for VDR 1.6.x only ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vd
Pertti Kosunen wrote:
> Lauri Tischler wrote:
>> I wonder if it is possible to somehow make xinelibout automagically
>> detect correct PrimaryDVB, now, every time I plug/unplug usb-devices
>> I need to manually edit setup.conf for correct PrimaryDVB.
>
> vdr --help
I wonder if it is possible to somehow make xinelibout automagically
detect correct PrimaryDVB, now, every time I plug/unplug usb-devices
I need to manually edit setup.conf for correct PrimaryDVB.
ie, I have
- dev 1 DVB-S FF PCI
- dev 2 DVB-T PCI
- dev 3 DVB-T USB (occasionaly)
this setup requires P
Petri Helin wrote:
> Artem Makhutov wrote:
>> Hi,
>>
>> On Sat, Mar 07, 2009 at 12:22:11AM +0200, Lauri Tischler wrote:
>>> Artem Makhutov wrote:
>>>
>>>> Is some body working on getting xineliboutput to work vdr-1.7.4?
>>> Latest CVS wo
Artem Makhutov wrote:
> Is some body working on getting xineliboutput to work vdr-1.7.4?
Latest CVS works.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Petri hintukainen wrote:
> Pertti Kosunen wrote:
>> Lauri Tischler wrote:
>>> - trying to play dvd (Starship Troopers) does not show
>>>correct subtitles, wanted language is defined in VDR.
>> Maybe this helps also for dvd?:
>> http://www.kosunen.fi/v
Rolf Ahrenberg wrote:
> On Sun, 22 Feb 2009, Lauri Tischler wrote:
>
>> Adding decoding of content descriptor would be nice.
>> It would allow recording of all soaps or football matches or
>> whatever without close watching of EPG.
>> patching of VDRADMIND might be
Adding decoding of content descriptor would be nice.
It would allow recording of all soaps or football matches or
whatever without close watching of EPG.
patching of VDRADMIND might be needed.
Cheers
___
vdr mailing list
vdr@linuxtv.org
http://www.
Petri hintukainen wrote:
> pe, 2009-02-20 kello 22:02 +0200, Alex Betis kirjoitti:
>> The problem is that when this script is run in background (& at the
>> end), the job is shown as "stopped".
>> I've tried to run vdr-sxfe itself in background, it opens the window
>> and the job stops.
>> I know t
Matti Ropo wrote:
> Lauri Tischler wrote:
>> Some operators (at least Welho) have rearranged their channel id's,
>> so you may need to re-scan your channels or allow VDR to automatically
>> update pid's and id's.
>
> I have allowed vdr to search new chan
Matti Ropo wrote:
> Hi
>
> I am using xxv with my vdr, but lately there has been strange problem.
> Couple of channels are missing most of the EPG data. Same data is in the
> vdr epg file, but does not appear in xxv. I have tried to look some
> erros from log file but haven't found any error me
gimli wrote:
> I saw some things going on in the xineliboutput CVS.
> Not sure if TS should work or not.
Seems to be "Work in Progress", no picture, no sound,
OSD works and subtitles appear. Patience
___
vdr mailing list
vdr@linuxtv.org
http://www.
Darren Salt wrote:
> I demand that Lauri Tischler may or may not have written...
>
>> Reinhard Nissl wrote:
>>> after being away 7 month from VDR development I'm pleased to announce
>>> release 0.9.0. You can find it on my homepage as usual:
>
>> Won
Reinhard Nissl wrote:
> Hi,
>
> after being away 7 month from VDR development I'm pleased to
> announce release 0.9.0. You can find it on my homepage as usual:
Wonder where can I find keybindings of vdr-xine.
It seems that keypadkeys in general work (keypad arrows,
keypad enter) but where the hel
I'm getting tons of messages like...
Jan 21 18:16:47 lassehome vdr: [4716] [input_vdr] vdr_plugin_write: PES too
long (17843 bytes,
max size 8192 bytes), data ignored !
Jan 21 18:16:48 lassehome vdr: [4716] [input_vdr] get_buf_element: big PES
(50251 bytes) !
Jan 21 18:16:48 lassehome vdr:
Sascha Vogt wrote:
> Hi Lauri,
>
> Lauri Tischler schrieb:
>> Sascha Vogt wrote:
>>> as my hardware is shipping (went for the ASUS M2N78Pro, GeForce 8300
>>> with an Athlon X2 4850e, hopefully that'll work with VDPAU and HD
>>> videos)
>> C
Klaus Schmidinger wrote:
> If anybody else thinks translating the word "Plugin" to "Erweiterung" makes
> sense, please speak up (or otherwise argue against it).
Plse dont change it, now when searching for 'plugin' something sometimes
comes up also from german sources, if the term is changed to 'e
Sascha Vogt wrote:
> Hi all,
>
> as my hardware is shipping (went for the ASUS M2N78Pro, GeForce 8300
> with an Athlon X2 4850e, hopefully that'll work with VDPAU and HD
> videos)
Couldn't find M2N78Pro, do you mean M3N78PRO ?
___
vdr mailing list
vdr@
Andrew Herron wrote:
> Hi,
>
> This ASUS board would be suitable;
>
> http://www.asus.com/products.aspx?modelmenu=1&model=2579&l1=3&l2=11&l3=812&l4=0
Too small, not enough pci-slots, minimum three pci-slots needed.
Four or five pci-slots would be nice.
__
Davide Cavalca wrote:
> Finally, I personally fail to see why people switching to MythTV is a
> bad thing; VDR is not a religion, I think everyone should use whichever
> software he thinks suits best his needs. I'm very happy with VDR and
> won't be switching anytime soon.
Switching to MythTV is
Gregoire Favre wrote:
> On Wed, Aug 13, 2008 at 04:11:46PM +0300, Lauri Tischler wrote:
>
>> Vanilla VDR-1.7.0 does not work with v4l-dvb drivers.
>> You have two options :
>> - download multiproto drivers from http://jusst.de/hg/multiproto
>>make and make insta
David Hláčik wrote:
> Hello guys,
>
> I have Fedora 9 with lastest kernel. I have Skystar 2 DVB PCI card rev 2.8.
> As this revision is using FlexCopII DVB i needed to recompile v4l dvb
> modules. I have downloaded lastest v4l using mercurial.
> Now my Skystar 2 works fine with Fedora 9 . I am usi
Seppo Ingalsuo wrote:
> Pasi Kärkkäinen wrote:
>> Maybe try with recent mplayer (from svn).. and give it
>> "-demuxer lavf -lavdopts fast:threads=2 -no-correct-pts" or something
>> similar..
>> you can also try with threads=4 etc..
>>
> "mplayer -demuxer lavf -lavdopts fast:threads=4 -nocorre
Seppo Ingalsuo wrote:
> Hi,
>
> Lauri Tischler wrote:
>> /usr/src/multiproto/v4l/cx25840-core.c:71: error: conflicting type
>> qualifiers for 'addr_data'
>> /usr/src/multiproto/v4l/../linux/include/media/v4l2-i2c-drv-legacy.h:41:
>> error: p
Upgraded to Debian Sid and Kernel 2.6.26
Multiproto fails once again.
What's up duck ?
lassehome:/usr/src/multiproto# make
make -C /usr/src/multiproto/v4l
make[1]: Entering directory `/usr/src/multiproto/v4l'
creating symbolic links...
Kernel build directory is /lib/modules/2.6.26-1-686/build
Alex Girchenko wrote:
> Lauri, I've found only one manual so far:
> http://www.linuxtv.org/vdrwiki/index.php/VDR_User%27s_Manual.
In that page section '1.15 Parameters in the Setup menu' contains
the information you are looking for, expect it is out-of-date, old.
So you are better off by getting t
Alex Girchenko wrote:
> Lauri, I've found only one manual so far:
> http://www.linuxtv.org/vdrwiki/index.php/VDR_User%27s_Manual. It
> doesn't contain a word on setup.conf. Also studied the entire wiki,
> the man page. Could you please provide a link to the exact manual you
> mean? TIA.
File MANUA
Alex Girchenko wrote:
> Thanks, you've saved my... night! :)
> Is there any official description of all of the options in setup.conf?
> Can't find it on the wiki.
RTFM, it's all in the MANUAL
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/c
From the README I understand that Mediaplayer uses settings
from VDR to select subtitles.
It does not seem to work, I have subtitles in VDR set as Finnish
but whenever I start a DVD it plays english subtitles, need to
select correct subtitles with subtitlekey on remote.
Grabbed testclip of shuttle takeoff, 1920x1080 resolution
VDR log shows
---
Jul 17 17:45:28 vdr3 vdr: [5831] [xine..put]
cPlaylist::EscapeMrl('/video/ksc_062707_sts117_launch_1080i.mpg')
Jul 17 17:45:28 vdr3 vdr: [5831] [xine..put] -->
'/video/ksc_062707_sts117_launch_1080i.mpg'
Jul 17 17:45:
Lauri Tischler wrote:
> I'm trying to force one DVB-T channel on VHF to particular card.
> I have three DVB-T cards in system, only card 2 is capable
> to tune to VHF frequency, so I want to set this channel
> to use allways card 2, I did set CA value in channel.conf to
> 2
Goga777 wrote:
> is it good for 1080i/720p channels ?
Well, it works, I can't say, yet, how good it is.
Local provider, YLE, is broadcasting HD (1280x720) on
VHF-channel 8. My VDR shows the picture fine.
It is only testpicture, colorbars, eventually they
will broadcast Bejing Olympics there.
I'm trying to force one DVB-T channel on VHF to particular card.
I have three DVB-T cards in system, only card 2 is capable
to tune to VHF frequency, so I want to set this channel
to use allways card 2, I did set CA value in channel.conf to
2 but still it chooses other cards.
What's up duck
_
Rolf Ahrenberg wrote:
> On Sun, 13 Jul 2008, Lauri Tischler wrote:
>
>> With DVB-T those are ok, but missing are
>> Transmission ---
>> Modulation ---
>> Coderate --- (H) --- (L)
>> Guard---
>> and Bandwith is reported as 7Mhz, should be
Goga777 wrote:
> Hi
>
> I'm using the latest femon + vdr 170 + h.264 patch. If I will watch h264
> dvb-s2 channels than some information in femon is
> missing -
>
> Apid - 0
> Spid - 0
> Aspect ratio - reserved
> Frame rate - 0.00 Hz
> Video format - unknown
> Resolution - 0x0
>
> Information
Goga777 wrote:
>> Using Femon 1.6.1 with VDR 1.7.0 and multiproto shows
>> odd parameter values, maybe Femon needs a patch ?
>
> what do you mean - odd ? There's some missing parameters, I wrote about this
> on this week
Odd, as strange, ie. Bandwidth is reported as 7Mhz when it should be 8Mhz
a
Using Femon 1.6.1 with VDR 1.7.0 and multiproto shows
odd parameter values, maybe Femon needs a patch ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Trying to google for manual, info or article where all parameters for
xine tvtime command are explained, what they do, why, etc.
No luck yet, any pointers ??
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Lauri Tischler wrote:
> VDR User wrote:
>> On Thu, Jul 10, 2008 at 4:13 AM, Lauri Tischler <[EMAIL PROTECTED]> wrote:
>>> What 'FF mod card' are you referring to ?
>> There's a hardware hack to allow the full transport stream to be
>> passed b
VDR User wrote:
> On Thu, Jul 10, 2008 at 4:13 AM, Lauri Tischler <[EMAIL PROTECTED]> wrote:
>> What 'FF mod card' are you referring to ?
>
> There's a hardware hack to allow the full transport stream to be
> passed by the Nexus. By default it doesn&#
Goga777 wrote:
>> Any chance of having an upgrade to multiproto_plus tree ?
>> I understand that multiproto_plus is the _only_ tree
>> sanctioned by Klaus.
>
> why ? The regular multiproto can work with vdr 1700 too. If you don't have
> FF mod card it's no any sense to use
> multiproto_plus
Hmm
Any chance of having an upgrade to multiproto_plus tree ?
I understand that multiproto_plus is the _only_ tree
sanctioned by Klaus.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Loaded latest xineliboutput from cvs, compiled and installed,
it did complain about old libextract, says that 0.5.20 is needed,
xbuntu has 0.5.18, might this be the reason for not working
dvd subtitle menus in Media Player ?
I would need to rape Xbuntu distro then and insert libextract
from Debian
JJussi wrote:
> Maybe 2x "Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz" is not enough..
Umm.. why does the log say 1596 MHz ?
model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
stepping: 6
cpu MHz : 1596.000
Matthias Fechner wrote:
> Hi,
>
> I have here an old VDR system running and my DVB-S cards are stopping to
> work now (VDR 1.6 and 2xDVB-S cards).
> It starts with a lot of distortions and then they stops to record
> completely. I have only 0 minute records for my new timers.
>
> In the log fil
Brian wrote:
> Lauri Tischler wrote:
>> Igor wrote:
>>
>>> could you explain please how it's possible to connect 3 cards in VDR to 3
>>> LNB's for Hotbird, Sirius, Astra for example
>>> with DiSEq-Cswitch
>> Simple diagram, using quad-ln
Mattia Rossi wrote:
> On Wed, 21 May 2008 16:57:33 +0400
> Igor <[EMAIL PROTECTED]> wrote:
>
> --- snip -
>> could you explain please how it's possible to connect 3 cards in VDR
>> to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch
>>
>
> Hmm, using this switch ?
> http://ww
Igor wrote:
> could you explain please how it's possible to connect 3 cards in VDR to 3
> LNB's for Hotbird, Sirius, Astra for example
> with DiSEq-Cswitch
Simple diagram, using quad-lnb's, input of lnbs are called as
HB-1, HB-2, HB-3, HB-4
SI-1, SI-2, S1-3, SI-4
AS-1, AS-2, AS-3, AS-4
Igor wrote:
>> Jean-Claude Repetto wrote:
>>> Lauri Tischler a Иcrit :
>>>> Jean-Claude Repetto wrote:
>>>>> Klaus Schmidinger wrote :
>>>>>> Plain vanilly VDR assumes that every DVB-S card can receive all
>>>>>> satell
Jean-Claude Repetto wrote:
> Lauri Tischler a écrit :
>> Jean-Claude Repetto wrote:
>>> Klaus Schmidinger wrote :
>>>> Plain vanilly VDR assumes that every DVB-S card can receive all satellites.
>>>>
>>>> Klaus
>>>>
>>> I
Jean-Claude Repetto wrote:
> Klaus Schmidinger wrote :
>> Plain vanilly VDR assumes that every DVB-S card can receive all satellites.
>>
>> Klaus
>>
>
> I hope this will be configurable in VDR 1.8 !
> The LNB type should also be configurable for each DVB card (I am still
> using a Full-band LNB o
Lauri Tischler wrote:
> Lauri Tischler wrote:
>> Halim Sahin wrote:
>>> Hi,
>>> On So, Apr 20, 2008 at 11:44:24 +0300, Lauri Tischler wrote:
>>>> Any particular requirement for kernel version,
>>>> i'm running 2.6.18-5-k7 (debian etch)at the
oleg roitburd wrote:
> 2008/4/24 Lauri Tischler <[EMAIL PROTECTED]>:
>> dvbdevice.c: In member function 'bool cDvbTuner::SetFrontend()':
>> dvbdevice.c:271: error: 'struct dvbfe_info' has no member named 'delivery'
>> dvbdevice.c:286:
oleg roitburd wrote:
> 2008/4/24 Lauri Tischler <[EMAIL PROTECTED]>:
>
>> vdr2:~/vdr-1.7.0# locate compiler.h
>> /usr/src/linux-headers-2.6.24-1-686/include/linux/compiler.h
>> /usr/src/linux-headers-2.6.24-1-common/include/linux/compiler.h
>
> you need to
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD
-DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS4\" -D_GNU_SOURCE
-DVIDEODIR=\"/video\" -DCONFDIR=\"/video\" -DPLUGINDIR=\"./PLUGINS/lib\"
-DLOCDIR=\"./locale\" -I/usr/include/freetype2
-I/root/multiproto_plus/linux/inc
Does VDR 1.4 - 1.6 work with multiproto drivers ?
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Lauri Tischler wrote:
> Halim Sahin wrote:
>> Hi,
>> On So, Apr 20, 2008 at 11:44:24 +0300, Lauri Tischler wrote:
>>> Any particular requirement for kernel version,
>>> i'm running 2.6.18-5-k7 (debian etch)at the moment ?
>> HMM this kernel is too o
Halim Sahin wrote:
> Hi,
> On So, Apr 20, 2008 at 11:44:24 +0300, Lauri Tischler wrote:
>> Any particular requirement for kernel version,
>> i'm running 2.6.18-5-k7 (debian etch)at the moment ?
>
> HMM this kernel is too old!
> I think you need min 2.6.22 or better
Magnus Hörlin wrote:
> Lauri Tischler wrote:
>> Halim Sahin wrote:
>>
>>> Hi,
>>> install the linux-headers package coresponding to your running kernel.
>>> e. G. linux-headers-2.6.24-1-686.
>>> you can get the running kernel's vers
Halim Sahin wrote:
> Hi,
> install the linux-headers package coresponding to your running kernel.
> e. G. linux-headers-2.6.24-1-686.
> you can get the running kernel's version by typing uname -r
>
> check out the multiproto drivers by typing
> hg clone http://just.dde/hg/multiproto_plus.
What'
Klaus Schmidinger wrote:
> On 04/12/08 15:42, Manu Abraham wrote:
>> If that looks hard, i can push a tree which is a result of the above
>> outlined steps.
>
> Thanks a lot for providing http://jusst.de/hg/multiproto_plus.
Any instructions somewhere how to stuff that into stock kernel (debian)?
Niko Mikkila wrote:
>> A last question, with DVB-S, I'm needing two cards if I want to see two
>> different channels because the channels could be on differents
>> transponders. But is it true with DVB-T ? In others words: if I want to
>> see 3 differents channels, do I really need 3 DVB-T tune
Klaus Schmidinger wrote:
> On 02/19/08 17:20, Lauri Tischler wrote:
>> Event info has disappeared. In ver 1.4.x it is
>>
>> Feb 19 18:00:20 vdr vdr: [28242] channel 2 (YLE TV2) event Ti
>> 19.02.2008 18:00-18:23 'Oikea kysymys' status 4
>> Feb 19 18:
Event info has disappeared. In ver 1.4.x it is
Feb 19 18:00:20 vdr vdr: [28242] channel 2 (YLE TV2) event Ti
19.02.2008 18:00-18:23 'Oikea kysymys' status 4
Feb 19 18:01:14 vdr vdr: [28242] channel 5 (YLE Teema) event Ti
19.02.2008 18:01-18:02 'Katsaus tulevaan' status 4
Feb 19 18:02:28 vdr vdr
Ludwig Nussel wrote:
> Klaus Schmidinger wrote:
>>Should there be a stable version 1.6.0 now, based on what's in
>>version 1.5.14, but without DVB-S2 or even H.264 support?
>
> Yes.
>
> It would be pity if that means that the stable version stays at
> 1.6.0 and doesn't receive any more bu
Klaus Schmidinger wrote:
>Should there be a stable version 1.6.0 now, based on what's in
>version 1.5.14, but without DVB-S2 or even H.264 support?
YES - if it works without any devel-type drivers, just with
standard kernel as delivered with debian etch
__
Alasdair Campbell wrote:
> Lauri Tischler wrote:
>> Füley István wrote:
>>>> Oops, that's really not so good... one can't comment about HDTV with a
>>>> resolution which is not full HDTV : 1920x1080...
>>> Ok, this means that my setup is a low-en
Füley István wrote:
>> Oops, that's really not so good... one can't comment about HDTV with a
>> resolution which is not full HDTV : 1920x1080...
>
> Ok, this means that my setup is a low-end instead of being "average" as I
> stated before, therefore my considerations about HDTV was totally wrong
Jan Exner wrote:
> But there are more people like Klaus who are quite happy with hardware
> decoding, and I am grateful he works the way he does.
Hear, hear...
Thankfully no need for totally bloated X-stuff or framebuffers or such..
Just plain minimal text/consolebased system.
VDR _is_ just a Set
Füley István wrote:
> PCI-Express has nothing to do with PCI, they're different slots.
> I'm selling hardware, and as I said before, current motherboards does
> not have 5 PCI slots.
> The last boards with 5 PCI slots were these: Asus P5P800, with AGP port,
> socket 775 on board 10/100 LAN, DDR 1
Klaus Schmidinger wrote:
> Does anybody have a recommendation for such a board?
Asrock ALiveNF5SLI-1394 has seven pci-slots
- 1 x PCI Express x 16 slot (White)
- 2 x PCI Express x 8 slots (Yellow; for NVIDIA® SLI™ only)
- 1 x PCI Express x1 slot
- 3 x PCI slots
_
Klaus Schmidinger wrote:
> From the pictures and description I also don't see any optical
> SPDIF output to which I could connect my Dolby-Digital decoder.
> AFAIK the HDMI connector also provids the digital audio, but
> that would go to the tv set - how would it go to the DD decoder?
http://www.
Pasi Kärkkäinen wrote:
> Btw afaik some countries are broadcasting SD content H.264 encoded.. norway
> for example?
Estonia sends all in mpeg-4, i think...
> Eesti DVB-T teenus hakkab tööle järgmiste parameetritega:
> Modulatsiooni tüüp: COFDM
> Modulatsiooniskeem: 64 QAM
> Kandvate arv: 8k
> V
Klaus Schmidinger wrote:
> On 11/14/07 17:24, Lauri Tischler wrote:
>> [EMAIL PROTECTED] wrote:
>>> "Graziano Pavone" <[EMAIL PROTECTED]> writes:
>>>
>>> [...]
>>>> And you wouldn't mind applying a huge patch on VDR to ach
[EMAIL PROTECTED] wrote:
> "Graziano Pavone" <[EMAIL PROTECTED]> writes:
>
> [...]
>> And you wouldn't mind applying a huge patch on VDR to achieve this goal?
>>
>> This feature is so interesting that I certainly wouldn't mind, even if it
>> would a very good feature to be included in the 1.5
Mika Orajärvi wrote:
> Hi,
> I tried starting vdr without existing setup.conf and by default it seems
> that Sans Serif is used. But it seems that I don't have that either since
> Vdr still segfaults, now with following backtrace. By the way, is "fc-list"
> the correct way to check if certain font
Morfsta wrote:
> Hi,
>
> I have just added a Nova-T 500 device to my VDR stable setup (1.4.7)
> and now have 5 frontends: -
>
> [ 29.735000] DVB: registering frontend 0 (ST STV0299 DVB-S)...
> [ 29.955000] DVB: registering frontend 1 (ST STV0299 DVB-S)...
> [ 29.976000] DVB: registering fr
Mika Orajärvi wrote:
> Hi!
>
> I’m trying to update vdr 1.4.x to 1.5.11. But my vdr keeps segfaulting every
> time when it’s started. It takes about 2-3 s after starting the vdr to the
> segfault. I’ve tried running it only with xine-plugin (0.8.0) so far and
> without any patches on top of vdr. A
Rolf Ahrenberg wrote:
> On Tue, 6 Nov 2007, Reinhard Nissl wrote:
>
>> The problem for this issue is in cRemux::cRemux():
>> new cRingBufferLinear(RESULTBUFFERSIZE, IPACKS, false, "Result");
>> IPACKS needs to be replaced by SUBTITLE_PACKS too. Otherwise a packet
>> larger than IPACKS (up to SUB
Lauri Tischler wrote:
> Nov 7 12:25:58 vdr2 vdr: [1407] VDR version 1.5.11 started
> Nov 7 12:25:58 vdr2 vdr: [1407] switched to user 'root'
> Nov 7 12:25:58 vdr2 vdr: [1407] found 0 locales in ./locale
> Nov 7 12:25:58 vdr2 vdr: [1407] no locale for language code '
Nov 7 12:25:58 vdr2 vdr: [1407] VDR version 1.5.11 started
Nov 7 12:25:58 vdr2 vdr: [1407] switched to user 'root'
Nov 7 12:25:58 vdr2 vdr: [1407] found 0 locales in ./locale
Nov 7 12:25:58 vdr2 vdr: [1407] no locale for language code 'deu,ger'
Nov 7 12:25:58 vdr2 vdr: [1407] no locale for lan
that plugin is ancient. Is there somewhere a plugin which compiles
under 1.4.6 or so.
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
1 - 100 of 116 matches
Mail list logo
