[USRP-users] Ethernet port not working. Leds are not on anymore

Hi there, Last week I was able to work normally on my USRP X-310 but when I tried to use it again this week the Ethernet connection was not working anymore. The LEDs are actually off so the Ethernet connection cannot be detected on a switch or a PC. Do you know what the problem could be? I ha

Re: [USRP-users] Internal reference signal USRP X-series

set-up and other purposes. Do you think it is a good approach? Best regards, Maria Jesus On 19/02/2019 12:32, Marcus D. Leech via USRP-users wrote: On 02/19/2019 06:08 AM, Maria Jesus Cañavate Sanchez via USRP-users wrote: Hi there! I wanted to ask if the USRP X-310 includes an oscillator to

[USRP-users] Internal reference signal USRP X-series

Hi there! I wanted to ask if the USRP X-310 includes an oscillator to create an internal 10MHz reference and 1 PPS signal, even if they are not that accurate, or if the only way to provide these internal signals is by adding the "Board Mounted GPSDO (OCXO)". Another thing I wanted to ask is

Re: [USRP-users] Control several USRPs via switch

IP addresses first? Just an idea. Regards, Leo On Tue, Feb 12, 2019 at 8:54 AM Maria Jesus Cañavate Sanchez via USRP-users <mailto:usrp-users@lists.ettus.com>> wrote: Hi Xavier, Thank you very much for your answer! I was just using the command uhd_find_devices from t

Re: [USRP-users] Control several USRPs via switch

3.125Msps. 100Mbps / (16 bit/sample x 2 IQ) = 3.125MSamples/s. Regards, Xavier On Tue, 12 Feb 2019 at 11:57, Maria Jesus Cañavate Sanchez via USRP-users <mailto:usrp-users@lists.ettus.com>> wrote: Hi there! I am having problems when connecting the USRP X310 to my PC via a swit

[USRP-users] Control several USRPs via switch

Hi there! I am having problems when connecting the USRP X310 to my PC via a switch (I am doing this as I would like to connect several USRPs simultaneously). The connection between the PC and the USRP via direct Ethernet connection works perfectly but not when I connect a switch in between. I

Re: [USRP-users] Maximum bandwidth of the X-series

ask there about processing requirements to guide your decisions. Sent from my iPhone On Jan 31, 2019, at 10:10 AM, Maria Jesus Cañavate Sanchez via USRP-users <mailto:usrp-users@lists.ettus.com>> wrote: Hi Marcus and Leandro, Thank you very much for your replies. In order to

Re: [USRP-users] Maximum bandwidth of the X-series

x27;ll need a PCIe or NVMe SSD drive at least. Regards, Leo On Wed, Jan 30, 2019, 12:58 Maria Jesus Cañavate Sanchez via USRP-users mailto:usrp-users@lists.ettus.com>> wrote: Hi there! My name is Maria and I have some questions regarding the

[USRP-users] Maximum bandwidth of the X-series

Hi there! My name is Maria and I have some questions regarding the maximum bandwidth achievable with the USRP X-series when it is connected to a host PC. 1. If the daughterboard UBX160 is used, that means that the maximum bandwidth achievable is 160MHz. However, the maximum ADC sample rate o

Re: [USRP-users] Problem to receive signal when tx and rx are connected together USRP X310

The gain settings were 0 for tx and rx and the attenuation was 10dB. I increased the gain values but I still had the same problem. Thanks! Best regards, Maria Jesus On 27/11/2018 13:44, Marcus D. Leech via USRP-users wrote: On 11/27/2018 07:56 AM, Maria Jesus Cañavate Sanchez via USRP

[USRP-users] Problem to receive signal when tx and rx are connected together USRP X310

Hi there, My name is Maria and I am contacting you as I have a really strange problem when I try to use the tx and rx of my USRP X310 at the same time to tx a simple CW signal at 3.5GHz and receive the same CW signal at the rx (an attenuator is connected between the two ports). The problem i

Re: [USRP-users] Number of receivers at the same time USRP X-310

relative to some other signal. So measuring at the antenna port makes no sense. Unless you’re talking about measuring signal phase change. Which is definitely still a digital domain question. Sent from my iPhone On Nov 13, 2018, at 11:18 AM, Maria Jesus Cañavate Sanchez via USRP-users wrote

Re: [USRP-users] Number of receivers at the same time USRP X-310

winRX daughter cards, each with two Rx chains, that you can use on a USRP X310 to have 4 receivers. Best Regards, Piotr Krysik W dniu 13.11.2018 o 13:08, Maria Jesus Cañavate Sanchez via USRP-users pisze: Hi again, Thank you very much for your answer. I have bought two daughter boards UBX-160, is that e

Re: [USRP-users] Number of receivers at the same time USRP X-310

for that. Am 13. November 2018 11:12:12 MEZ schrieb "Maria Jesus Cañavate Sanchez via USRP-users" : Hi all, My name is Maria and I have the USRP X-310, which has 4 ports, 2 Tx/Rx and 2 Rx. I would like to ask if you can use the 4 ports as receivers at the same time.

[USRP-users] Number of receivers at the same time USRP X-310

Hi all, My name is Maria and I have the USRP X-310, which has 4 ports, 2 Tx/Rx and 2 Rx. I would like to ask if you can use the 4 ports as receivers at the same time. Thank you very much in advance! Best regards, Maria Jesus ___ USRP-users maili