Hi there,
My name is Maria and I am contacting you as I have a really strange
problem when I try to use the tx and rx of my USRP X310 at the same time
to tx a simple CW signal at 3.5GHz and receive the same CW signal at the
rx (an attenuator is connected between the two ports).
The problem is that no signal is received, just noise. I know the two
USRP blocks are working since if I do not change anything from the gnu
radio script and I just connect the rx to a signal generator and the tx
to a signal analyser, I can visualize the proper signal on GNU radio and
on the spectrum analyser. Is there anything else I need to take into
account when the two ports are connected to each other?
Thank you very much in advance.
Best regards,
Maria Jesus
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
