Hello Everyone,
I have an X300 radio with one TwinRx daughterboard annd one SBX
daughterboard. When we are trying to receive using three channels(i.e. 2
channels of TwinRx and 1 channel of SBX),where our subdevice specifications
are "A:0 A:1 B:0", we are seeing a run time error
RuntimeError: Conf
On 06/12/2019 03:56 PM, Jason Matusiak via USRP-users wrote:
Problem solved. It was a firewall issue. Is there a list of what
ports I should make sure are opened to UDP? The ones I caught were
49152 and 49154.
Are there any others I need to know?
And from x300_fw_common.h:
define X300
On 06/12/2019 03:56 PM, Jason Matusiak via USRP-users wrote:
Problem solved. It was a firewall issue. Is there a list of what
ports I should make sure are opened to UDP? The ones I caught were
49152 and 49154.
Are there any others I need to know?
From fw_common.h
#define USRP2_UDP_CTR
Problem solved. It was a firewall issue. Is there a list of what ports I
should make sure are opened to UDP? The ones I caught were 49152 and 49154.
Are there any others I need to know?
From: Jason Matusiak
Sent: Wednesday, June 12, 2019 10:32 AM
To: Ettus Ma
On 06/12/2019 03:34 AM, Paolo Palana wrote:
Hello Marcus, thank you for your reply.You are perfectly right. The
configuration is as follow.
1) I've my devel machine
2) on the same LAN (through gigabit switch) there is the machine where
the n310 is connected.
3) Both machines have ubuntu 16.04
I have a new issue with my E320. I loaded up an E320 with an SD card image
that I have used on a different working E320.
On my personal machine, I am using a 1G image that seems to work fine and
uhd_find_device (and probe) seems to be working fine. I change the IP and load
up an XG image ont
Hello,
I'm trying to bake an RFNoC image from the latest master, using Vivado
2018.3. However, I get DRC errors:
CRITICAL WARNING: [Synth 8-6859] multi-driven net on pin ce_clk with 1st
driver pin 'bus_clk_gen/CLK_OUT4' [/home/x/fpga/usrp3/top/x300/x300.v:284]
CRITICAL WARNING: [Synth 8-6859] mult
Dear Sir/Madam,
My name is Simona and I am trying to convert my x-310 usrp to an NI-usrp
rio to be able to use it with Labview. In order to do that, I am following
the documentation which can be found in:
https://kb.ettus.com/Converting_an_X310_into_an_NI-USRP_Rio
But I have found the following
Hello Marcus, thank you for your reply.You are perfectly right. The
configuration is as follow.
1) I've my devel machine
2) on the same LAN (through gigabit switch) there is the machine where
the n310 is connected.
3) Both machines have ubuntu 16.04 amd64 and vivavdo tools 2017.4
4) on the mach
