OK Dropbox updated:
https://www.dropbox.com/sh/6qfjjqlfzmyegyd/AABu45Ney1xRoen-NyJim5dGa?dl=0
Thanks for testing.
Philip
On 12/12/2018 07:16 AM, Philip Balister via USRP-users wrote:
> On 12/12/2018 05:42 AM, Said Uçar via USRP-users wrote:
>> Hi Philip,
>>
>>
>> I write the image you provided
Thank you, Marcus - that looks promising.
Best regards,
Jan
From: USRP-users On Behalf Of Marcus D.
Leech via USRP-users
Sent: 12 December 2018 18:49
To: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] B200 GPS Antenna Port Current Limit
On 12/12/2018 04:00 AM, Jan Safar via USRP-users wr
Where in the process is it failing? Are you able to generate the project files
with CMake or is the issue coming up during the build in Visual Studio?
Regards,
Brock
From: USRP-users On Behalf Of Bernd Witzel
via USRP-users
Sent: Tuesday, December 11, 2018 1:11 PM
To: usrp-users@lists.ettus.
On 12/12/2018 04:00 AM, Jan Safar via USRP-users wrote:
Hello,
Please can you advise the maximum current that can be drawn from the
GPS Antenna port on the B200?
I’m thinking of using an active antenna which should draw less than 30
mA and an amplified GPS splitter which draws 15 mA – can t
On 12/12/2018 04:48 AM, Disco Daniele via USRP-users wrote:
Hi!
For a 5G application, I’m trying to use an X310 with a direct ethernet
connection between board and pc with rate of 10GB.
For this purpose I’m using the NIC INTEL ETH Converged NTWK ADPTR-SR2.
Like Linux box I’m using an UBUNT
You may have multiple versions of GNU Radio and/or UHD libraries still
installed on your PC. Try navigating to the wherever you installed them (e.g.,
/usr/local/lib) and deleting the ones you don’t want by hand.
Robin Coxe | Chief R&D Program Manager, SDR | Santa Clara, CA | 408.610.6363
___
Brais,
Sam sent you a little bit the wrong direction there, the B200mini has the PLL
phase noise issue that precludes use in a MIMO system.
The B210 can be fully time and frequency locked to an external 10MHz reference
and PPS.
What is slightly tricky about using multiple B210’s in a MIMO config
On 12/12/2018 05:42 AM, Said Uçar via USRP-users wrote:
> Hi Philip,
>
>
> I write the image you provided and it booted without trouble. I set the
> KERNELPATH to /usr/src/kernel. Then, I tried to build batman-adv module
> but failed at first, as expected. I given an error;
>
> /bin/
Hi Marcus,
I have changed the version to UHD-3.9.LTS. With *uhd_usrp_probe
--args="type=usrp1" *I haven't erros. But I don't know why the GNURadio
version hasn't changed... I have, with the previous errors :
* GNU C++ version 7.3.0; Boost_106501; UHD_4.0.0.rfnoc-devel-702-*
*geec24d7b*
Any idea?
Hi Philip,
I write the image you provided and it booted without trouble. I set the
KERNELPATH to /usr/src/kernel. Then, I tried to build batman-adv module
but failed at first, as expected. I given an error;
/bin/sh: scripts/basic/fixdep: No such file or directory
Then I built al
Hello. Please tell me examples of cyclic reading of data from the USRP
N210 card in the num_samps_and_done mode. And the possible change of
parameters in the intervals between reading. I'm trying to work with
on python
___
USRP-users mailing list
USRP-use
Thanks Sam! If I understand correctly the link that you refer to, it is
possible to obtain time and phase synchronization with B210s, so the only
issue would be to compensate phase offset which could be done by software.
Could you elaborate a little bit more? I'm probably missunderstading the
threa
Hi!
For a 5G application, I'm trying to use an X310 with a direct ethernet
connection between board and pc with rate of 10GB.
For this purpose I'm using the NIC INTEL ETH Converged NTWK ADPTR-SR2.
Like Linux box I'm using an UBUNTU 18.04 low latency.
To to that I
* Download from the Intel s
Hello,
Please can you advise the maximum current that can be drawn from the GPS
Antenna port on the B200?
I'm thinking of using an active antenna which should draw less than 30 mA and
an amplified GPS splitter which draws 15 mA - can the B200 supply 45 mA on the
antenna port?
Also, the page l
14 matches
Mail list logo
