Hi All,
I have 2 USRP E312 devices, out of which one device is showing
incompatible FPGA issue with following error:
*uhd_usrp_probe --args "addr=192.168.1.187"*
*Mac OS; Clang version 9.0.0 (clang-900.0.39.2); Boost_106501;
UHD_003.010.002.000-MacPorts-Release*
*-- Detecting internal GPS *
I was gonna say, there's actually three of them ;)
On Thu, Feb 1, 2018, 9:06 PM Robin Coxe via USRP-users <
usrp-users@lists.ettus.com> wrote:
> On p.8 of B200 schematic:
> T801 is Macom ETC1-1-13TR (RF2)
> T800 is Minicircuits TC1-1-43A+ (RF3)
> U802 is Anaren BD3150L50100AHF (RF1)
>
> On Thu, F
On p.8 of B200 schematic:
T801 is Macom ETC1-1-13TR (RF2)
T800 is Minicircuits TC1-1-43A+ (RF3)
U802 is Anaren BD3150L50100AHF (RF1)
On Thu, Feb 1, 2018 at 5:45 PM, Ron Economos via USRP-users <
usrp-users@lists.ettus.com> wrote:
> There's also a balun on the AD9361 input. Unfortunately, the balu
There's also a balun on the AD9361 input. Unfortunately, the balun part
number for the low frequency path is not on the schematic.
Ron
On 02/01/2018 05:39 PM, Dan CaJacob via USRP-users wrote:
That's an interesting thought. The 9361 does have a pretty bad match.
I'll try adding a 50 Ohm attenu
That's an interesting thought. The 9361 does have a pretty bad match. I'll
try adding a 50 Ohm attenuator and see if that helps.
On Thu, Feb 1, 2018 at 5:14 PM Robin Coxe wrote:
> Hi Dan. Both the B200 and the E312 use the Analog Devices AD9361 RF
> integrated transceiver. This chip does have
I think the incompatibility issues folks have are due to trying to use
gr-uhd (a component in GNU Radio) that was built against a certain
version of UHD with a different version of UHD.
If you're building from source, you should be able to use pretty much
any recent version of UHD with any rec
Hi Michael,
I found it.thank you.
2018-01-31 4:03 GMT+08:00 Michael West :
> Hi Jon,
>
> There are 2 cable kits available. One is 4" and the other is 24". They
> can be found here:
>
> https://www.ettus.com/product/details/JTAG-FX3-Cable-4
> https://www.ettus.com/product/details/JTAG-FX3-Cable-
Hi Jacob,
Can you try upgrading to UHD 3.10.3.0 to see if it resolves this error?
Regards,
Nate Temple
On Thu, Feb 1, 2018 at 5:09 PM, Jacob Knoles via USRP-users <
usrp-users@lists.ettus.com> wrote:
> Hello all,
>
> I have an application that utilizes an X300 radio to play a short burst of
> p
Hello all,
I have an application that utilizes an X300 radio to play a short burst of
pulses. This burst style transmission will be repeated hundreds of times
during the lifetime of the application along with several other types of
bursts and a brief capture activity.
Some of these functions are
I was able to get it up and running by following this guide:
https://kb.ettus.com/Software_Development_on_the_E3xx_USRP_-_Building_RFNoC_UHD_/_GNU_Radio_/_gr-ettus_from_Source
BUT: using the gr-ettus commit of 30302780a44f3f0b146e9b81f88e70c9d983f559
and the uhd commit of 12a34d6ef6b9666e29a23039
Hey everyone!
This is my very first message, so apologies if I didnt send this correctly
😊.
I am also facing the same issue outlined by Paul and would really
appreciate some assistance with this. I am using an Ettus USRP E312, GNU
Radio 3.7.10.2 <+6137102> and Ubuntu 16.04.3. <+6116043> Here is
Hi Dan. Both the B200 and the E312 use the Analog Devices AD9361 RF
integrated transceiver. This chip does have an integrated LNA. Perhaps
there's some sort of mismatch between your DUTs and this integrated LNA at
<1 GHz?
ADI publishes the RX S-parameters:
https://ez.analog.com/thread/41208#13
Thanks for the announcement of the new UHD 3.10.3 release.
I've noticed on the gnuradio mailing list some comments about possible
incompatibility
of certain UHD versions and Gnuradio versions (assuming I'm reading things
correctly).
Is there a table that lists compatibility of the various UHD bra
You could see this if you're outputting one data type from uhd_rx_cfile
and reading samples as a different data type in Matlab.
On 02/01/2018 11:38 AM, Yeswanth via USRP-users wrote:
Hello Everyone,
I am new to using USRP . I am capturing samples on a CBX board using
“Uhd_rx_cfile -A “TX/RX”
Hello Everyone,
I am new to using USRP . I am capturing samples on a CBX board using
“Uhd_rx_cfile -A “TX/RX” -r 20e6 -f 2412e6 -g 20 capture.dat “ and read
them into matlab using “load_samples(capture.dat)”
I have plotted the spectrum and I see that I get a peak at Fs/2 i.e at 10MHz.
Co
Hello USRP-users,
I have hit a snag uploading the images required to make my USRP2 function.
I will give a brief description of my setup, what the symptoms are, and
what troubleshooting steps I have taken.
Device: USRP2, serial# 1330
Daughter Card: SBX Rev. 5.1
Operating System: Ubuntu GnuRadio d
Hey guys,
I have put together a noise figure meter application that uses a USRP as
the sensing device. It started off as a way to measure the NF of the USRP
itself. I have a calibrated noise source from an HP 8970B Noise Figure
Meter. To test the NF of the USRP, I connect the head to the USRP inpu
17 matches
Mail list logo
