On 2020-11-09 00:58, Samuel Sieb wrote:
On 11/9/20 12:54 AM, ToddAndMargo via users wrote:
On 2020-11-09 00:19, Samuel Sieb wrote:
On 11/9/20 12:16 AM, ToddAndMargo via users wrote:
On 2020-11-08 23:07, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22
On 11/9/20 12:54 AM, ToddAndMargo via users wrote:
On 2020-11-09 00:19, Samuel Sieb wrote:
On 11/9/20 12:16 AM, ToddAndMargo via users wrote:
On 2020-11-08 23:07, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
Don't follow the re
On 2020-11-09 00:19, Samuel Sieb wrote:
On 11/9/20 12:16 AM, ToddAndMargo via users wrote:
On 2020-11-08 23:07, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
Don't follow the readme. I gave you the command to run:
make -C /lib/m
On 11/9/20 12:16 AM, ToddAndMargo via users wrote:
On 2020-11-08 23:07, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
Don't follow the readme. I gave you the command to run:
make -C /lib/modules/`uname -r`/build M=$PWD
$ cd MC
On 2020-11-08 23:07, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
On 11/8/20 8:01 PM, ToddAndMargo via users wrote:
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33,
On 11/8/20 11:07 PM, Samuel Sieb wrote:
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
On 11/8/20 8:01 PM, ToddAndMargo via users wrote:
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33,
On 11/8/20 11:04 PM, ToddAndMargo via users wrote:
On 2020-11-08 22:22, Samuel Sieb wrote:
On 11/8/20 8:01 PM, ToddAndMargo via users wrote:
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -
On 2020-11-08 22:22, Samuel Sieb wrote:
On 11/8/20 8:01 PM, ToddAndMargo via users wrote:
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
Ok, so nothing there. Any luck with the driver
On 11/8/20 8:01 PM, ToddAndMargo via users wrote:
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
Ok, so nothing there. Any luck with the driver?
None.
From the readme
Don't follo
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
Ok, so nothing there. Any luck with the driver?
None.
From the readme
Building the Driver and application:
On 2020-11-02 18:51, Tom Horsley wrote:
On Mon, 2 Nov 2020 18:16:08 -0800
ToddAndMargo via users wrote:
Ok, so nothing there. Any luck with the driver?
I will have to wait till tomorrow.
So if you can build a working kernel, obviously the thing to
do is make a virtual machine running that
On Mon, 2 Nov 2020 18:16:08 -0800
ToddAndMargo via users wrote:
> > Ok, so nothing there. Any luck with the driver?
>
> I will have to wait till tomorrow.
So if you can build a working kernel, obviously the thing to
do is make a virtual machine running that kernel and use
pci passthrough to g
On 2020-11-02 17:04, Samuel Sieb wrote:
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
Ok, so nothing there. Any luck with the driver?
I will have to wait till tomorrow.
___
users
On 11/2/20 3:25 PM, ToddAndMargo via users wrote:
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
Ok, so nothing there. Any luck with the driver?
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to
On 2020-11-02 14:33, Samuel Sieb wrote:
lspci -nn
# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen
Core Processor Host Bridge/DRAM Registers [8086:5918] (rev 05)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics
P630 [8086:591d] (rev 04)
On 11/2/20 2:21 PM, ToddAndMargo via users wrote:
On 2020-11-02 13:14, Samuel Sieb wrote:
What about the other info I asked for in the previous email?
Which one did I miss?
It was easy to miss in the rest of the text.
Can you show the output of "lspci -nn" for the other devices around this
On Mon, 2 Nov 2020 at 17:15, Samuel Sieb wrote:
> On 11/2/20 10:31 AM, ToddAndMargo via users wrote:
> > On 2020-11-02 01:59, Samuel Sieb wrote:
> >There's also a Linux driver
> >> available at https://www.asix.com.tw/en/support/download if you want
> >> to try it.
> >
> > You have to recompi
On 2020-11-02 13:14, Samuel Sieb wrote:
On 11/2/20 10:31 AM, ToddAndMargo via users wrote:
On 2020-11-02 01:59, Samuel Sieb wrote:
There's also a Linux driver
available at https://www.asix.com.tw/en/support/download if you want
to try it.
You have to recompile the linux kernel
No, you do
On 11/2/20 10:31 AM, ToddAndMargo via users wrote:
On 2020-11-02 01:59, Samuel Sieb wrote:
There's also a Linux driver
available at https://www.asix.com.tw/en/support/download if you want
to try it.
You have to recompile the linux kernel
No, you don't. Unpack the tar file, go into the di
On 2020-11-02 01:59, Samuel Sieb wrote:
There's also a Linux driver
available at https://www.asix.com.tw/en/support/download if you want to
try it.
You have to recompile the linux kernel
___
users mailing list -- users@lists.fedoraproject.org
To uns
On 11/1/20 11:59 PM, ToddAndMargo via users wrote:
On 2020-11-01 14:13, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no l
On 2020-10-30 20:38, ToddAndMargo via users wrote:
Hi All,
Here we go again.
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
https://stage.siig.com/products/it-products/serial-parallel/parallel/pcie/single-parallel-port-pcie-card.html
System Requirements:
...
L
On 11/1/20 11:59 PM, ToddAndMargo via users wrote:
On 2020-11-01 14:13, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no l
On 2020-11-01 14:13, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no lp0 showing in CUPS or Printer Admin (notice
I used t
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no lp0 showing in CUPS or Printer Admin (notice
I used the Linux term for it!)
After running th
On Sun, Nov 1, 2020 at 3:43 PM ToddAndMargo via users <
users@lists.fedoraproject.org> wrote:
> On 2020-11-01 12:39, Doug McGarrett wrote:
> >>> I don't think it's originally a windows term. It's actually "LPT
> >>> #1", similar to the following "Serial Port #1". "LPT" stands for
> >>> "line pri
On 2020-11-01 12:39, Doug McGarrett wrote:
I don't think it's originally a windows term. It's actually "LPT
#1", similar to the following "Serial Port #1". "LPT" stands for
"line printer" for those of us old enough to remember when printers
could only do lines of text.
I wonder what it was
On 11/1/20 2:45 PM, ToddAndMargo via users wrote:
On 2020-11-01 00:08, Samuel Sieb wrote:
On 10/31/20 11:50 PM, ToddAndMargo via users wrote:
On 2020-10-31 23:36, Samuel Sieb wrote:
If I do the modprobe will above, lpt1 (lp0) shows up in
both printer admin and CUPS. Otherwise not.
Why do
On 2020-11-01 00:08, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
On 2020-10-31 23:36, Samuel Sieb wrote:
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
bash: /sys/bus/pci/drivers/parport_pc/new_id: No such file or directory
Was the "parport_pc" driver loa
On 2020-11-01 00:08, Samuel Sieb wrote:
On 10/31/20 11:50 PM, ToddAndMargo via users wrote:
On 2020-10-31 23:36, Samuel Sieb wrote:
If I do the modprobe will above, lpt1 (lp0) shows up in
both printer admin and CUPS. Otherwise not.
Why do you say "lpt1"? I have 4 lp[0-3] devices in /dev, bu
On Sun, 1 Nov 2020 at 02:54, ToddAndMargo via users <
users@lists.fedoraproject.org> wrote:
> On 2020-10-31 23:36, Samuel Sieb wrote:
> >> # echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
> >> bash: /sys/bus/pci/drivers/parport_pc/new_id: No such file or directory
> >
> > Was the "parport
On 10/31/20 11:50 PM, ToddAndMargo via users wrote:
On 2020-10-31 23:36, Samuel Sieb wrote:
If I do the modprobe will above, lpt1 (lp0) shows up in
both printer admin and CUPS. Otherwise not.
Why do you say "lpt1"? I have 4 lp[0-3] devices in /dev, but I have
no actual parallel port hardwar
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
On 2020-10-31 23:36, Samuel Sieb wrote:
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
bash: /sys/bus/pci/drivers/parport_pc/new_id: No such file or directory
Was the "parport_pc" driver loaded when you tried that? Try loading
th
On 2020-10-31 23:36, Samuel Sieb wrote:
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
bash: /sys/bus/pci/drivers/parport_pc/new_id: No such file or directory
Was the "parport_pc" driver loaded when you tried that? Try loading the
driver with *no* parameters and then try that comma
On 2020-10-31 23:36, Samuel Sieb wrote:
If I do the modprobe will above, lpt1 (lp0) shows up in
both printer admin and CUPS. Otherwise not.
Why do you say "lpt1"? I have 4 lp[0-3] devices in /dev, but I have no
actual parallel port hardware.
I suspect by force loading the driver with setting
On 10/31/20 10:53 PM, ToddAndMargo via users wrote:
On 2020-10-31 14:56, Samuel Sieb wrote:
What do you mean that it shows up and you can print to it?
If I do the modprobe will above, lpt1 (lp0) shows up in
both printer admin and CUPS. Otherwise not.
Why do you say "lpt1"? I have 4 lp[0-3]
On 2020-10-31 14:56, Samuel Sieb wrote:
What do you mean that it shows up and you can print to it?
Ooops. Missed that one. I can configure the printer and
print to it, but nothing shows on the printer's console window.
The print jobs just disappears. CUPS show no pending jobs.
--
~
On 2020-10-31 14:56, Samuel Sieb wrote:
On 10/31/20 3:39 AM, ToddAndMargo via users wrote:
On 2020-10-31 00:14, Samuel Sieb wrote:
On 10/30/20 8:38 PM, ToddAndMargo via users wrote:
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
# modprobe -r lp
# modprobe -r parport_pc
On 2020-10-30 20:38, ToddAndMargo via users wrote:
1) connected a USB to Parallel converter card. Printer work fine
2) boot off of Fedora-Xfce-Live-x86_64-33-1.2.iso. Printer
admin still can't find the card.
3) With
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
On 10/31/20 3:39 AM, ToddAndMargo via users wrote:
On 2020-10-31 00:14, Samuel Sieb wrote:
On 10/30/20 8:38 PM, ToddAndMargo via users wrote:
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc io=0x378 irq=1
On 2020-10-31 00:14, Samuel Sieb wrote:
On 10/30/20 8:38 PM, ToddAndMargo via users wrote:
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc io=0x378 irq=11
# modprobe lp
the card does show up and you c
On 10/30/20 8:38 PM, ToddAndMargo via users wrote:
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc io=0x378 irq=11
# modprobe lp
the card does show up and you can print to it, but
the jobs instantly di
Hi All,
Here we go again.
I now have a Siig JJ-E01211-S1 Single Parallel Port PCIe Card
https://stage.siig.com/products/it-products/serial-parallel/parallel/pcie/single-parallel-port-pcie-card.html
System Requirements:
...
Linux kernel 2.6 and later version
Works with Linux but
43 matches
Mail list logo
