On 2020-11-01 14:13, Samuel Sieb wrote:
On 10/31/20 11:53 PM, ToddAndMargo via users wrote:
# modprobe -r lp
# modprobe -r parport_pc
# modprobe parport_pc
# modprobe lp
# echo 9710 9900 > /sys/bus/pci/drivers/parport_pc/new_id
But still no lp0 showing in CUPS or Printer Admin (notice
I used the Linux term for it!)
After running the new_id command, do "lspci -k" again and see if it
picked it up.
All the lcpci command pick it up. They always do. There
is never an instance where they do not.
# lspci -k -s 01:00.0
01:00.0 Parallel controller: MosChip Semiconductor Technology Ltd.
MCS9900 Multi-I/O Controller
Subsystem: Device a000:2000
> If not, then try "echo 1 > /sys/bus/pci/rescan" and check
> again.
Ran it anyway. No joy.
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
