This workaround worked for me in fedora. It may work in ubuntu too,
since I suspect it is a bios issue. I had the same problem in Fedora. I
installed ubuntu to see if that would work better, but it did not. I
installed fedora again. What finally solved the problem for me was going
into the bios set
I agree, I hardly understand this new behavior...
I understand they want the preview to be discovered and that the right click
may seem hidden for newcomers but this should be fixed another way.
To launch an app from the dash, you need to double-click. or single click, move
the mouse and click
I got the same failure IOError: [Errno 2] No such file or directory. It
failed again after in about 24 hours after restarting the full backup.
It looks to have left 2.5G of duplicity files around.
~/.cache/deja-dup
$ du -sh .
2.5G
--
You received this bug notification because you are a member of
ure: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: eric 2641 F pulseaudio
/dev/snd/controlC0: eric 2641 F pulseaudio
Date: Thu Jul 4 11:27:57 2013
HibernationDevice: RESUME=UUID=7f75b1da-fb52-4189-99d7-e9f2ea4af423
InstallationDate: Installed on 2012-06-05
A distribution volume with software packages has been detected.
Would you like to try to upgrade from it automatically?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1198651
Title:
Can not upgrade
Public bug reported:
12.10
Intel i3 530
64 bit
74 GB HDD
90 GB Swap (necessary for app I use)
Ran synaptic to select upgrades after installing 12-4 to 12-10 upgrade
that yielded errors. Selected 31 or so upgrades so I just allowed all...
Please tell me where to find logs so I can post.
When reb
I have tested with mainline kernel and it doesn't solve anything.
** Tags removed: apport-bug
** Tags added: kernel-bug-exists-upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
Here is the file attached.
Be aware that the device works almost correctly for few minutes then it doesn't
work anymore... It can then come back to life 40 minutes later for few minutes
and then it crashes again.
In my first post I gave a link to someone who had found a solution for distros
befo
for a couple of minutes before crashing :
58 Ko/sec instead of 1700 Ko/sec
ping results are : rtt min/avg/max/mdev = 45.3/51.7/220.0/18.1 with 1% packet
loss.
Thank you
Eric
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https
I have the same problem, I was just wondering if there was any news on a
fix..
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/882005
Title:
Emerald Theme manager listed but not available
To manage n
Public bug reported:
After upgrading my Ubuntu 10.04 to 10.10 3.0.0-12, material
acceleration of my Radeon 7500 disappeared. I reinstalled the Xorg
driver with no success.
Thanks !
ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: xorg 1:7.6+7ubuntu7
ProcVersionSignature: Ubuntu 3.0.0-12.20
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/883421
Title:
material accelaraion disappeared
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/883421/
On my lucid 64 bit system I downloaded asterisk add-ons 1.6.2.3 source
tarball and built channel mobile from source, and that fixed the problem
for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/657
I have an Acer Aspire 5741 with Natty fully updated and still i have no
backlight control
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/693942
Title:
Acer Aspire 5742Z No Screen Brightness Control
Public bug reported:
Binary package hint: dmraid
My installation couldn't be completed and some features are working and
some aren't. Please contact me for further explanation.
Thanks
ProblemType: Package
DistroRelease: Ubuntu 10.10
Package: dmraid 1.0.0.rc16-3ubuntu2
ProcVersionSignature: Ubun
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/690317
Title:
package dmraid 1.0.0.rc16-3ubuntu2 failed to install/upgrade: impossible de
supprimer « /target/usr/share/bug.dpkg-tmp » de façon sûre:
Also seeing this bug, though I don't use any form of remote desktop(the default
one is installed, but never used)
10.10 on an HP ProBook 6555b
Started less than a month ago
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
During a Dist upgrade Debian etch to Debian squeeze, I lost network
connectivity and power to the server ?*?sweating?*?
Thanks for this fix, here's what I had to do:
Post #24: Remove --skip-bdb ...(because the question to ask if you want
to keep the old file is the default)
and..
mysql_upgrade
Public bug reported:
Binary package hint: firefox
When selecting a game room to play in, the game window will open for a
few seconds then disappear
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: firefox 3.6.16+build1+nobinonly-0ubuntu0.10.10.1
ProcVersionSignature: Ubuntu 2.6.35-28.49-gen
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/742774
Title:
Game windows close unexpectedly after selecting game room
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.c
same here,
Release:11.04
Codename: natty
on a standard natty, I've forced reinstall of mplayer ...
the sound works on gstreamer
here is the sound part of the log
==
Opening audio decoder: [ffmpeg] FFmpeg/liba
and for the bug exposure : I just can't play any hd movies on ubuntu :
gstreamer lags ( lack of vdpau ) , and mplayer is mute (this bug) most
of my HD movies are in h264/AC3
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bu
I just tested this on Ubuntu 10.10, using vinagre version 2.30.2. I
still experience this error, with the following output when the username
is specified for the ssh tunnel:
vinagre --gtk-vnc-debug
(vinagre:3621): gvnc-DEBUG: vncconnection.c Init VncConnection=0xa0c5300
gtk-vnc: vncdisplaykeymap.c
Changed status to "new" as requested logs have been attached.
Also, I wonder if this might actually be a bug in indicator session
(https://launchpad.net/ubuntu/+source/indicator-session)? It looks like
it may be related to, or the same as,
https://bugs.launchpad.net/ubuntu/+source/indicator-sessio
I also have ubuntu-docs version 10.10.4ubuntu0.1 installed, and am using
10.10, and I see the correct version mentioned in "About Ubuntu". I am
unsure why my experience differs from Nicolas'.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Output of "/usr/share/gnome-power-manager/gnome-power-bugreport >
~/Desktop/gpm.log". Let me know if you need any further logs.
** Attachment added: "gpm.log"
https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/637942/+attachment/1728353/+files/gpm.log
--
10.10 -> many times logs out ins
It may also be relevant to note that I have only experienced this bug
when using the "indicator applet session", not when using the physical
power button on my computer. Have others found this to be the case?
--
10.10 -> many times logs out instead of shutting down
https://bugs.launchpad.net/bugs
*** This bug is a duplicate of bug 618253 ***
https://bugs.launchpad.net/bugs/618253
** This bug has been marked a duplicate of bug 618253
Error shown on screen after resume with radeon card
* You can subscribe to bug 618253 by following this link:
https://bugs.launchpad.net/ubuntu/+sourc
Experiencing this on a Thinkpad T60 with ATI X1400 and the latest Ubuntu
10.10. The error does not seem to appear every time I resume fro m
suspend, but when it does only a hard reset seems to deal with it
(otherwise the computer does not respond).
--
Error shown on screen after resume with rade
For some unknown reason Evolution is running normal the last few days.
Has there been some kind of update wich could have effect on the running
of Evolution?
--
Evolution crashes almost randomly
https://bugs.launchpad.net/bugs/584183
You received this bug notification because you are a member of
No
On Sat, Sep 11, 2010 at 10:35 AM, Fabio Marconi
wrote:
> Hello
> Is this problem present with the latest updated Karmic's or Lucid's
> packages?
> Thanks in advance
> Fabio
>
> ** Changed in: ubuntu
> Status: New => Incomplete
>
> --
> when i launch firefox the loading circle still spins
I am no longer experiencing this problem with banshee 1.6.1 and an up-
to-date Lucid install. Can someone else confirm whether or not this
problem is fixed?
--
Banshee iPod support stopped working at ~Lucid Alpha 2
https://bugs.launchpad.net/bugs/549839
You received this bug notification because
Public bug reported:
The libldns1 and/or ldnsutils package(s) need to have SHA-2 RRSIG
support to be able to understand the DNSSEC records for the root zone
(".").
Not being able to verify SHA-2 hashes is fine as long as you use DNSSEC
on some alternative DNS system that is not the de facto inter
Also, on a somewhat related note, ldns-1.6.1/dnssec_verify.c:227 does
not check the return of ldns_resolver_query() which can return NULL,
potentially (and in my case) resulting in a NULL pointer dereference.
The error in my case is the result of sendto() returning -1 in
ldns_udp_send_query() becua
Also note that dig from bind-tools can do this:
~ $ sudo tee /etc/trusted-key.key << "EOF"
. IN DNSKEY 257 3 8 AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
X6RS6CXpoY68L
Public bug reported:
Hi
I usually suspend my desktop session by closing the lit of my laptop
without logout. When I open it again ubuntu go back from sleep and ask
me my password I recover my desktop.
What happen :
I can sometimes see my desktop a few (milli)seconds before the system ask me my
Thanks Wolf for the workaround. That worked for me.
--
GRUB_GFXMODE and update_grub2 don't work with multiple resolutions
https://bugs.launchpad.net/bugs/506241
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing lis
me too.
Appears for the first time the 17 Jun 2010.
No changes were made on the machine between 16 June 2010 4:30pm and 17 June
2010 6:00am.
No update
--
Screen Immediately Relocks Itself After Unlocking
https://bugs.launchpad.net/bugs/595177
You received this bug notification because you are a
as a workaround you need to go to
System -> Preference -> Screensaver
and disable
- Activate screensaver when computer idle
- Lock screen when screensaver is active
After this you do not encounter this issue anymore.
Bear in mind that you need to lock your workstation when you go to grab some
don
Hi,
Qwit can be found here:
http://www.webupd8.org/2010/09/install-qwit-11-pre-2-in-ubuntu-now.html
32bit:
libqoauth1_1.0.1-1~lffl~lucid~ppa_i386.deb
qwit_1.1+svn353-3~lffl~lucid~ppa_i386.deb
64bit:
libqoauth1_1.0.1-1~lffl~lucid~ppa_amd64.deb
qwit_1.1+svn353-3~lffl~lucid~ppa_i386.deb
I did instal
Hello,
Problem solved on Linux Mint 21.3 with kernel 5.15.0-121 :-)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2076576
Title:
5.15.0-118: NFS causes suspend to fail
To manage notifications abou
I am being affected by this issue as well. My machine fails to boot at
all, providing the following error after GRUB
[0.39] ACPI Error: No handler for Region [VRTC] (b44dee92)
[SystemCMOS] (20210730/euregion-130)
[0.394449] ACPI Error: Region SystemCMOS (ID=5) has no handler
(2021073
Hello,
Same problem for me on Mint mate 21.3, since the update from 5.15.0-117
to 5.15.0-118.
My computer : Ryzen 5 3600, mother board Asus TUF B450, and graphic card
Sapphire radeon RX580 (ATI).
The only tempory way to still use my computer with this is, on the grub
menu, to select 5.15.0-117 i
Hello,
After update of Mint 21.3 kernel from 5.15.0-118 to 5.15.0-119, I
confirm the problem still the same.
Waiting for 5.15.0-121 update.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2076576
Titl
Public bug reported:
This has happened twice recently; I think it was after a recent update.
The computer will crash and reboot after I close the lid.
When I re-open the lid the screen is blank with no program open; it only
began happening in the last 5 days.
I am using 24.04 LTS
ProblemType:
Public bug reported:
Automatically submitted bug
ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: tzdata 2025b-0ubuntu0.20.04
ProcVersionSignature: Ubuntu 5.15.0-134.145~20.04.1-generic 5.15.173
Uname: Linux 5.15.0-134-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.27
Architecture: amd6
Hi
I haven't had any problems with this in the latest Ubuntu version 8.04
Eric
http://ericspierings.blogspot.com/
On Sat, Jul 5, 2008 at 12:42 AM, Jean-Baptiste Lallement <
[EMAIL PROTECTED]> wrote:
> Thank you for taking the time to report this bug and helping to make
> U
I have this problem as well using Ubuntu 8.04 and the latest patches of
everything. The only thing unique about my system is that I'm running a custom
Hardy kernel to support PAE and Xeon processor.
Typically I can kill the firefox process and bring up a new window, but that is
always a pain.
Public bug reported:
Binary package hint: xserver-xorg-input-synaptics
Hi, this bug may be related to #133831, however for me this only started
after updating to intrepid.
Most of the time, but not every time, when I resume from suspend, the
cursor will move around frantically on it's own. It ev
I am also affected by this bug. 2.6.24-20-generic halted just after the
hlt check. I have an Athlon XP 1500+ on a Gigabyte GA-7N400 motherboard
with 1GB RAM.
Tim, I've upgraded to your kernel packages (2.6.24-21-generic etc.) and
everything works well, kernel boots and all modules are working as f
As a side-effect, this prevents ubuntu-vm-builder from working.
** Changed in: linux-meta (Ubuntu)
Status: New => Confirmed
--
virtual flavour missing in intrepid
https://bugs.launchpad.net/bugs/247588
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
Public bug reported:
Binary package hint: firefox-3.0
http://www.pagesdor.be/
When i clic on the link "Selectionnez une rubrique"
Pub still on front a part of the page.
Release Ubunt : 8.04
ProblemType: Bug
Architecture: i386
Date: Tue Jul 29 21:11:30 2008
DistroRelease: Ubuntu 8.04
NonfreeKern
** Attachment added: "Capture.png"
http://launchpadlibrarian.net/16407686/Capture.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/16407687/Dependencies.txt
** Attachment added: "ExtensionSummary.txt"
http://launchpadlibrarian.net/16407688/ExtensionSummary.txt
I still have the same problem. I found NetBeans uninstalled last week, and I
could not reinstall it again using apt-get. I had to use aptitude which
downgraded tzdata. Now, each time the Ubuntu update manager starts, it asks me
to do a partial upgrade, which would reinstall tzdata, and remove Ne
Gutsy. On the laptop, I made a
clean install after an hard disk failure.
Eric
Marek Slama a écrit :
> openjde-6-headless uses recommends on tzdata-java. It is strong but not
> absolute dependency.
>
> It means that when you install openjre it will install tzdata-java but
> later
I am having the same issue as Eric Bursley. Running Ubuntu 8.04 64-bit
up to date. One window, good; two windows, okay; third window, 100%
cpu. I can also reproduce the error on Ubuntu 8.04 32-bit as well.
I disabled all my add-ons, enabling them one at a time... and presto it
turned out that
One additional quick note, I upgraded to version 3.1.20080714L of the
Google Toolbar and still have the issue.
--
Firefox uses high CPU for extended periods of time when spawning a new window
with many tabs already open
https://bugs.launchpad.net/bugs/66350
You received this bug notification bec
Hello,
If I look in Synaptic, the version of tzdata and tzdata-java I have
installed is 2008b. The last available version is 2008c for tzdata, and
2008b for tzdata-java. Was tzdata-java 2008c updated in the repos? Why
do I only obtain the 2008b?
Eric
Eric Buist a écrit :
> Hello,
> I am usi
caused by the fact that tzdata is on the main repository
while tzdata-java is on universe?
Eric
Eric Buist a écrit :
> Hello,
> I am using sun-java6-jdk as a JDK, not OpenJDK. But I have installed
> openjdk-jre to get the Firefox 64 bits plugin.
> On my 32 bits laptop running Hardy, I
I am still having the problem on Hardy.
--
problem playing mono sound files on totem
https://bugs.launchpad.net/bugs/201234
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
, these are not configurable in the settings.
There are no infos in manpage or faq to solve this, so this is bug and not a
wishlist call.
Bye
Eric
** Affects: sound-juicer (Ubuntu)
Importance: Undecided
Status: New
--
Musicbrainz upload broken
https://bugs.launchpad.net/bugs/260829
You
** Attachment added: "juicer2.png"
http://launchpadlibrarian.net/17044556/juicer2.png
--
Musicbrainz upload broken
https://bugs.launchpad.net/bugs/260829
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ub
Whatever it was, I sorted it out and use Ubuntu happily today.
Eric
On Thu, Aug 21, 2008 at 11:14 PM, Andreas Moog
<[EMAIL PROTECTED]>wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Thank you for taking the time to report this bug and helping to make
> Ubuntu
I am having this problem with network-manager-openvpn but the discussion
seems relevant. In my case, in version .6 of nm-openvpn, there was an
option (not the default) that said "Only use VPN for these
addresses...". In .7, I have been unable to replicate that setting and
therefore lose my fast l
uctions on
the usage of the new panel, or consider reworking the panel to be more
intuitive? I can't find instructions anywhere.
Thanks,
Eric
ii network-manager-openvpn 0.7~~svn20081015t024626-0ubuntu1
network management framework (OpenVPN plugin
network-
> My guess is they thought it was unnecessary and wanted to simplify the
> GUI. I was talking about security policy because the reporter was
> asking that NM *ignore* the network's settings and never set the default
> route that the network tries to push.
>
OK, thanks for the clarification.
I'll
Just wanted to let you know that under Fedora 10, I can use the LCD
brightness applet in Gnome to set the brightness and I also don't need
to run "xrandr --output LVDS --set BACKLIGHT_CONTROL native" or "xrandr
--output LVDS --set BACKLIGHT_CONTROL legacy" first.
Hardware: Sony Vaio VGN-BZ12XN, Mo
Also ran into this with FAT32 boot partition, during in place upgrade
from 8.04 to 8.10. Seems like hard linking is a requirement for package
installation so I'm using an unsupported configuration. Just commenting
for completeness.
--
memtest86+ 1.60-1 fails to install with FAT16 /boot
https://
I revisited this issue tonight and after an unnecessary excursion into
the land of bleeding xorg, discovered that other user accounts on the
same machine don't have the problem. deleted all kwin related conf files
in ~/.kde/share/config/ fixes and now no crash.
Tried to comment same on upstream bu
Public bug reported:
Binary package hint: knetworkmanager
opensuse 11.1 has a knetworkmanager package built for kde 4.2, which
seems more or less feature complete, if a bit rough.
Not sure if this is built from
svn://anonsvn.kde.org/home/kde/branches/work/knetworkmanager/
I may try to build a p
Can someone who has applied this patch please post details of the
procedure? I can't figure out where boot.eventd and run.eventd are
supposed to go. Thanks!
--
daemontools-run needs to work with upstart
https://bugs.launchpad.net/bugs/253465
You received this bug notification because you are a
I made a mistake: OpenSuse 11.1 ships with a KDE-4.1 compiled KNetworkManager
[1] (for instance it links to libplasma2)
There is also a KDE-4.2 compiled package [2] , which may or may not actually
be functional (as of yesterday it wouldn't install due to a dependency issue
with its -lang packag
Jonathon: I'm confused. I thought this opensuse package was different
from the new plasma applet, but looking inside the src.rpm I see that
you are right about the SVN path.
--
package kde 4.2 knetworkmanager
https://bugs.launchpad.net/bugs/306184
You received this bug notification because you ar
netztier, Thanks for the clarification. I would have thought the first
panel under "IPv4 Settings" was the correct area to configure this
"Addresses"
I now have it working. To be specific for anyone else reading this, add
the following to the IPv4 Settings>Routes area, add a new entry with
simi
r the confusion. THanks for catching it.
Eric
--
The ""Only use VPN for these addresses..." option from 0.6.x version has either
disappeared or become non-intuitive.
https://bugs.launchpad.net/bugs/305584
You received this bug notification because you are a member of Ubuntu
Bugs, wh
reproduce with an Ubuntu 6.06 live CD and it seems a
regression to a bug in Debians iproute package. It was also very easy to check
with a Ubuntu 8.10 live CD that it is now working fine.
Best Regards,
Eric Janz
--
The "ip route get" returns wrong interface and gateway in an multipa
Just after i submitted this bug, my system froze. I was NOT able to
recover using the tips in the OP.. unless there is a weird combination
needed on a laptop to hit sys req.
--
compiz randomly freezes X
https://bugs.launchpad.net/bugs/176589
You received this bug notification because you are a m
Apparently I still have some learning to do with bzr and launchpad.net.
I tried to create the branch using:
bzr push lp:///~esh/vmbuilder/ec2exec-fixes-2
but instead it created:
https://code.launchpad.net/~ubuntu-ec2/vmbuilder/ec2exec-fixes-2
In any case, the fix works there.
--
ec2exec:
Taking this ticket since I am tired of having to restart 30+ minute
builds when a single piece of the bundle fails to upload.
** Changed in: vmbuilder
Assignee: Chuck Short (zulcss) => Eric Hammond (esh)
** Changed in: vm-builder (Ubuntu)
Assignee: (unassigned) => Eric Hammon
I went the easy route and just added the --retry option to ec2-upload-
bundle
The fix is available on this branch:
https://code.launchpad.net/~esh/vmbuilder/ec2exec-fixes-2
** Changed in: vm-builder (Ubuntu)
Status: Confirmed => Fix Committed
--
vmbuilder EC2: Retry ec2-upload-bundle
Public bug reported:
vmbuilder --ec2 currently has a single template for /etc/fstab which is
based on the 64-bit /etc/fstab for EC2.
The exposed disks differ between 32- and 64-bit instances and they
should have different /etc/fstab setups to match what is advertised in
the EC2 documentation:
ht
** Changed in: vm-builder (Ubuntu)
Assignee: (unassigned) => Eric Hammond (esh)
Status: New => Fix Committed
** Also affects: vmbuilder
Importance: Undecided
Status: New
** Changed in: vmbuilder
Status: New => Fix Committed
** Changed in: vmbuilder
Public bug reported:
This change on the ec2exec branch:
http://bazaar.launchpad.net/~nijaba/vmbuilder/ec2exec/revision/276
causes this error:
2008-11-10 02:03:55,690 DEBUG['sed', '-i', '"s/tty1/xvc0/"',
'%s/etc/event.d/tty1']
2008-11-10 02:03:55,697 INFO sed: -e expression #1, ch
Hello, I also have the Creative Nomad Muvo 128 and get the same dmesg
output as above with kernel 2.6.27 on Intrepid Ibex 8.10.
--
usb device Creative Nomad_Muvo not mountable
https://bugs.launchpad.net/bugs/240211
You received this bug notification because you are a member of Ubuntu
Bugs, which
I tried similar steps and it worked correctly this time.
I still have the commands which created the wrong branch sitting there
in a terminal so I know I didn't dream it. However, I can't reproduce
it at this time.
--
ec2exec: quotes not needed in sed command
https://bugs.launchpad.net/bugs/296
I'm starting to think it's bzr/launchpad's problem and not mine. I
subsequently did:
bzr push
in the same directory, and it went and created the correct branch which
I had originally requested:
Using saved location: bzr+ssh://[EMAIL
PROTECTED]/~esh/vmbuilder/ec2exec-fixes-2/
Created new
Public bug reported:
Bug request: Please add the Gnome bug #549267 fix into the latest
Ubuntu updates. My original Gnome bug description is below:
Please describe the problem:
With Ubuntu 8.10 (latest 2.6.27-7-generic kernel) and GNome 2.24.1 mouse is
configured to be 'left handed' via the Sys
Kenan just made a new release of evtouch (0.8.8) including gborzi's
patch see http://www.conan.de/touchscreen/CHANGELOG.evtouch
--
evtouch works incorrectly when the screen is left or right rotated
https://bugs.launchpad.net/bugs/222164
You received this bug notification because you are a member
This is also affecting me, sometimes it shows short descriptions, sometimes not.
It usually cuts off the short description after hitting Check though.
I'm using Compiz+GNOME if that matters.
--
update-manager layout does not leave adequate room for package short
descriptions
https://bugs.launch
** Description changed:
Bug request: Please add the Gnome bug #549267 fix into the latest
Ubuntu updates. My original Gnome bug description is below:
Please describe the problem:
With Ubuntu 8.10 (latest 2.6.27-7-generic kernel) and GNome 2.24.1 mouse is
configured to be 'left
** Attachment added: "CoreDump.gz"
http://launchpadlibrarian.net/19735670/CoreDump.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/19735671/Dependencies.txt
** Attachment added: "Disassembly.txt"
http://launchpadlibrarian.net/19735672/Disassembly.txt
** Attachm
I have the same problem, but even after I removed the password from the keys,
it keeps failing to connect. It seems to fail the MS-CHAP authentication.
As I can understand from the last posts, there is no fix to be expected,
because no one knows how to release it or wants to do it. I am more and
Fn F5 + Fn F6 do not work on this laptop running Intrepid, nor setting
the brightness manually or with the gnome brightness applet:
[EMAIL PROTECTED]:~/Desktop$ uname -a
Linux vaiopro 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
[EMAIL PROTECTED]:~/Desktop$ grep . -r /var/li
Fn F5 + Fn F6 do not work on this laptop running Intrepid, nor setting
the brightness manually or with the gnome brightness applet:
[EMAIL PROTECTED]:~/Desktop$ uname -a
Linux vaiopro 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux
[EMAIL PROTECTED]:~/Desktop$ grep . -r /var/li
If I run the following commands in a terminal, I'm able to dim the
brightness using the xbacklight command:
xrandr --output LVDS --set BACKLIGHT_CONTROL native
sudo /etc/init.d/acpid restart
--
Fn keys on VAIO don't produce keystrokes nor ACPI events
https://bugs.launchpad.net/bugs/251665
You re
The above solution is not for Vaio owners with an Intel chipset I guess,
the hotkeys still do no work on my laptop, running up-to-date Intrepid:
[EMAIL PROTECTED]:~$ grep . -r /var/lib/acpi-support/*-*
/var/lib/acpi-support/bios-version:R0290Q1
/var/lib/acpi-support/system-manufacturer:Sony Corpor
No, I didn't follow those instructions, I am using the workaround you
mentioned in a script to set my brightness but this is far from ideal, a
fix would be great. I guess I am suffering from two bugs ?
1. The xrandr bug, or is it a bug in xserver-xorg-video-intel ?
2. sony_laptop kernel module not
The fstab contents decision has been pushed off to the user with the --part
option in development on the following branch:
https://code.launchpad.net/~nijaba/vmbuilder/ec2exec
** Changed in: vm-builder (Ubuntu)
Assignee: (unassigned) => Nick Barcet (nijaba)
Status: New => Fix Committ
Fixes are meged into
https://code.launchpad.net/~nijaba/vmbuilder/ec2exec
and are ready to be merged into the trunk.
--
vmbuilder EC2: "sub postinstall" => "sub post_install"
https://bugs.launchpad.net/bugs/292888
You received this bug notification because you are a member of Ubuntu
Bugs, which
The changes in the following brand obviate the need for a postinstall script so
this bug is no longer relevant.
https://code.launchpad.net/~nijaba/vmbuilder/ec2exec
** Changed in: vmbuilder
Status: New => Fix Committed
** Changed in: vmbuilder
Assignee: (unassigned) => Eric H
401 - 500 of 10371 matches
Mail list logo
