From: Dinesh Maniyam
This patch is to add SPI clock support for stratix10. Get clock rate
function always returning 0 because the DW-SPI driver get the rate
from clock node in dts but Stratix10 does not support device tree
clock node.To overcome this spi will get the clock_rate directly
from spi
From: Dinesh Maniyam
MEMCLKMGR_EXTCNTRST_C0CNTRST register defined as BIT[0] in documentation
but it is wrongly defined as BIT[7] in u-boot code. This register is used
to hold associated pingpong counter in reset
while PLL and 5:1 mux configuration is changed.
Signed-off-by: Dinesh Maniyam
From: Dinesh Maniyam
The reserved space is extended to 32MB in Linux kernel because
additional space is needed for authorization execution of JIC/RBF file.
U-Boot required to align with Linux.
Signed-off-by: Dinesh Maniyam
---
arch/arm/dts/socfpga_agilex.dtsi | 4 ++--
1 file changed, 2
From: Dinesh Maniyam
Status busy means transfer is accepted but SDM does not have more freed
buffer. It is not an error. Continue process the data if receive OK and
BUSY status.
Signed-off-by: Ley Foon Tan
Signed-off-by: Dinesh Maniyam
---
drivers/fpga/intel_sdm_mb.c | 3 ++-
1 file changed
From: Dinesh Maniyam
Convert the constant integer to 'phys_size_t' to avoid overflow
when calculating the SDRAM size.
Signed-off-by: Chee Hong Ang
Signed-off-by: Dinesh Maniyam
---
drivers/ddr/altera/sdram_soc64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
From: Dinesh Maniyam
Prior U-Boot pass control to Linux, U-Boot will send a mailbox command
"HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on HPS SW
transition.
Signed-off-by: Chin Liang See
Signed-off-by: Dinesh Maniyam
---
arch/arm/mach-socfpga/misc_soc64.c | 5 +++
From: Dinesh Maniyam
Add a new mailbox command "HPS_STAGE_NOTIFY" to notify Secure Device
Manager (SDM) on the stage of HPS code execution. In general, there
are three main code execution stages: First Stage Boot Loader (FSBL)
which is U-Boot SPL, Second Stage Boot Loader (SSBL) which
From: Dinesh Maniyam
Prior SPL pass control to U-Boot, SPL will send a mailbox command
"HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on HPS SW
transition. The purpose is for debug as user can query
SDM on HPS error details when HPS enters a warm reset due
to error such a
From: Dinesh Maniyam
Convert the constant integer to 'phys_size_t' to avoid overflow
when calculating the SDRAM size.
Signed-off-by: Dinesh Maniyam
---
v1->v2
- Add space in title
---
drivers/ddr/altera/sdram_soc64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
From: Dinesh Maniyam
Prior U-Boot pass control to Linux, U-Boot will send a mailbox command
"HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on HPS SW
transition.
Signed-off-by: Dinesh Maniyam
---
v1->v2
Add space in title
---
arch/arm/mach-socfpga/misc_soc64.c | 5
From: Dinesh Maniyam
Status busy means transfer is accepted but SDM does not have more freed
buffer. It is not an error. Continue process the data if receive OK or
BUSY status.
Signed-off-by: Ley Foon Tan
Signed-off-by: Dinesh Maniyam
---
v1 -> v2
- change to "OK or Busy status i
From: Dinesh Maniyam
Status busy means transfer is accepted but SDM does not have more freed
buffer. It is not an error. Continue process the data if receive OK or
BUSY status.
Signed-off-by: Dinesh Maniyam
---
v2->v3
-Copyright year updated and alignment adjusted.
---
drivers/f
From: Dinesh Maniyam
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan
Signed-off-by: Dinesh Maniyam
---
arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 11
From: Dinesh Maniyam
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan
Signed-off-by: Dinesh Maniyam
---
arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi | 11
From: Dinesh Maniyam
Override __udelay() as 'always inlined' function so that PSCI code
run in '__secure' section can call this delay function as well.
Signed-off-by: Chee Hong Ang
Signed-off-by: Dinesh Maniyam
---
arch/arm/mach-socfpga/timer_s10.c | 35 ++
From: Dinesh Maniyam
There is hardware bug in NCORE CCU IP and it is causing an issue in the
coherent directory tracking of outstanding cache lines.
The workaround is disabling snoop filter.
Signed-off-by: Dinesh Maniyam
---
drivers/cache/cache-ncore.c | 6 +++---
1 file changed, 3 insertions
From: Dinesh Maniyam
Convert the constant integer to 'phys_size_t' to avoid overflow
when calculating the SDRAM size.
Signed-off-by: Dinesh Maniyam
---
v3->v2
- copyright year updated and alignment updated.
v2->v1
- add space in title
---
drivers/ddr/altera/sdram_soc64.c |
From: Dinesh Maniyam
The patch is to support nand reset command for Cadence Nand Driver.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 28
1 file changed, 28 insertions(+)
diff --git a/drivers/mtd/nand/raw/cadence_nand.c
b/drivers/mtd
From: Dinesh Maniyam
This patch is to support NAND_CMD_SET_FEATURES & NAND_CMD_GET_FEATURES.
These commands is one of the basic commands of NAND. Params get from
these commands will be used to set timing mode of NAND data interface.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand
From: Dinesh Maniyam
This patch is to add support for reading param page of NAND device.
These paramaters are unique and used for identification purpose.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 30 +
1 file changed, 30 insertions
From: Dinesh Maniyam
The patch is to poll for thread complete status to ensure the
descriptor processing is complete. If complete then can ensure
controller already update the descriptor status.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 9 +
1 file
From: Dinesh Maniyam
The patch is to ensure ddr memory is updated with the data from dcache,
This would help to ensure cdma always reading the latest dma descriptor
in ddr memory.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 4
1 file changed, 4 insertions
From: Dinesh Maniyam
This patch is to leverage linux code to support hardware ECC interface
in verify nand bad block.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/nand_base.c | 71 +---
include/linux/mtd/rawnand.h | 13 ++
2 files changed, 60
From: Dinesh Maniyam
This patch is add support for spl nand to load binary image from NAND
to RAM.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_spl.c | 96 ++
1 file changed, 96 insertions(+)
create mode 100644 drivers/mtd/nand/raw/cadence_spl.c
From: Dinesh Maniyam
This patch is to enable configs for nand boot.
Signed-off-by: Dinesh Maniyam
---
configs/socfpga_agilex5_nand2_defconfig | 169
1 file changed, 169 insertions(+)
create mode 100644 configs/socfpga_agilex5_nand2_defconfig
diff --git a/configs
From: Dinesh Maniyam
The patch is to enable nand to use bounce buffer. In bounce buffer,
read/write buf will use cadence->buf which has been allocated
using malloc. This will align the memory and avoid memory to be
allocated in different addresses.
Signed-off-by: Dinesh Maniyam
---
driv
From: Dinesh Maniyam
This patch is to enable the Kconfig and Makefile for the
Cadence NAND driver for the agilex5 family device.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/Kconfig | 9 +
drivers/mtd/nand/raw/Makefile | 1 +
2 files changed, 10 insertions(+)
diff --git a
From: Dinesh Maniyam
This patch is to enable the Kconfig and Makefile for the Cadence-Nand
SPL support in agilex5 family device.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/Kconfig | 7 +++
drivers/mtd/nand/raw/Makefile | 1 +
2 files changed, 8 insertions(+)
diff --git a
From: Dinesh Maniyam
This patch is to remove SYS_NAND_BLOCK_SIZE dependency for cadence NAND.
This config is not needed as the driver will send command read
parameter page to identify the NAND block size during initialization.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/Kconfig | 2
From: Dinesh Maniyam
This patch is to enable SPL_SYS_NAND_SELF_INIT for Cadence NAND SPL.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 90f8f4b688..32444c2468
From: Dinesh Maniyam
This patchset add Cadence NAND driver support for
Intel Agilex5 devices.
The NAND driver is leveraged from the cadence-nand-controller.c
from Linux. U-Boot will support read, write and erase NAND with
Cadence driver. The driver further enhanced in U-Boot to support
NAND
From: Dinesh Maniyam
The Cadence NAND is a configurable mtd raw block which
supports multiple options for chipsets, clocking and reset structure, and
feature list.
Signed-off-by: Dinesh Maniyam
---
.../mtd/cadence,nand.yaml | 98 +++
1 file changed, 98
From: Dinesh Maniyam
This patch is to enable cdns-nand dts setting for the socfpga_agilex5
family device.
Signed-off-by: Dinesh Maniyam
---
arch/arm/dts/socfpga_agilex5.dtsi | 14 ++
.../arm/dts/socfpga_agilex5_socdk-u-boot.dtsi | 28 +++
2 files changed
From: Dinesh Maniyam
This patch is to enable driver for Cadence NAND for the family
device agilex5. This driver is leveraged from linux.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 2210 +++
include/cadence-nand.h | 526
From: Dinesh Maniyam
The patch is to extend support read and write 64-bits of buffer.
This is required for Cadence NAND Driver to
read/write ONFI parameter page. The parameter page is mapped to 64-bit.
With only read/write 32 bits of buffer,there is an issue of overwriting
last 4 bits of buffer
From: Dinesh Maniyam
This patch will add support for readid command in Cadence NAND driver.
The id is unique and used for flash identification.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 32 -
1 file changed, 31 insertions(+), 1
From: Dinesh Maniyam
This patch will add support for read status command
in Cadence NAND driver. This status bit is important to check
whether the flash is write-protected.
Signed-off-by: Dinesh Maniyam
---
drivers/mtd/nand/raw/cadence_nand.c | 46 -
include
From: Dinesh Maniyam
This patchset add Cadence NAND driver support for
Intel Agilex5 devices.
The NAND driver is leveraged from the cadence-nand-controller.c
from Linux version 6.11.2. U-Boot will support read, write and erase
NAND with Cadence driver. The driver further enhanced in U-Boot
to
From: Dinesh Maniyam
The Cadence NAND is a configurable mtd raw block which
supports multiple options for chipsets, clocking and reset structure, and
feature list.
Signed-off-by: Dinesh Maniyam
---
.../mtd/cadence,nand.yaml | 98 +++
1 file changed, 98
From: Dinesh Maniyam
Extend support read and write 64-bits of buffer.
This is required for Cadence NAND Driver to
read/write ONFI parameter page. The parameter page is mapped to 64-bit.
With only read/write 32 bits of buffer,there is an issue of overwriting
last 4 bits of buffer which failed the
From: Dinesh Maniyam
Add support for read status command
in Cadence NAND driver. This status bit is important to check
whether the flash is write-protected.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/cadence_n
From: Dinesh Maniyam
Add support for reading param page of NAND device.
These paramaters are unique and used for identification purpose.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/cadence_n
From: Dinesh Maniyam
Add support for readid command in Cadence NAND driver.
The id is unique and used for flash identification.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/cadence_n
From: Dinesh Maniyam
Leverage linux code to support hardware ECC interface
to verify nand bad block.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/nand_base.c | 71 +---
include
From: Dinesh Maniyam
Enable nand to use bounce buffer. In bounce buffer,
read/write buf will use cadence->buf which has been allocated
using malloc. This will align the memory and avoid memory to be
allocated in different addresses.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the &q
From: Dinesh Maniyam
Poll for thread complete status to ensure the
descriptor processing is complete. If complete then can ensure
controller already update the descriptor status.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mt
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the
Cadence NAND driver for the agilex5 family device.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/Kconfig | 9 +
drivers/mtd/nand/raw/Makefil
From: Dinesh Maniyam
Add support for spl nand to load binary image from NAND
to RAM. Leverage the existing nand_spl_load_image from nand_spl_loaders.c
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
- Leverage the existing nand_spl_load_
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the Cadence-Nand
SPL support in agilex5 family device.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/Kconfig | 7 +++
drivers/mtd/nand/raw/Makefile | 1
From: Dinesh Maniyam
Remove SYS_NAND_BLOCK_SIZE dependency for cadence NAND.
This config is not needed as the driver will send command read
parameter page to identify the NAND block size during initialization.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to&qu
From: Dinesh Maniyam
Enable SPL_SYS_NAND_SELF_INIT for Cadence NAND SPL.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/d
From: Dinesh Maniyam
Enable cdns-nand dts setting for the socfpga_agilex5
family device.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
arch/arm/dts/socfpga_agilex5.dtsi | 14 ++
.../arm/dts/socfpga_agilex5_socdk-u
From: Dinesh Maniyam
Support NAND_CMD_SET_FEATURES & NAND_CMD_GET_FEATURES.
These commands is one of the basic commands of NAND. The parameters get
from these commands will be used to set timing mode
of NAND data interface.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this pa
From: Dinesh Maniyam
Enable driver for Cadence NAND for the family
device agilex5. This driver is leveraged from the path
/drivers/mtd/nand/raw/cadence-nand-controller.c from the
stable version 6.11.2.
Signed-off-by: Dinesh Maniyam
---
v2:
- Minor code refactor based on linux version 6.11.2
From: Dinesh Maniyam
Support nand reset command for Cadence Nand Driver.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/cadence_nand.c | 26 ++
1 file changed, 26 insertions(+)
diff --git
From: Dinesh Maniyam
Enable configs for nand boot.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
- using #include mechanism to keep track of the variant
- add maintainer
---
---
board/intel/agilex5-socdk/MAINTAINERS | 2 +
From: Dinesh Maniyam
Ensure ddr memory is updated with the data from dcache.
This would help to ensure cdma always reading the latest dma descriptor
from ddr memory.
Signed-off-by: Dinesh Maniyam
---
v2:
- remove the "this patch is to" commit phrases
- add support for invali
From: Dinesh Maniyam
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam
From: Dinesh Maniyam
Add simple test to check i3c controller defined in sandbox test DT.
Basically, this test case will check validity of the i3c controller
by probing it and perform basic commands of cmd/i3c.c
Signed-off-by: Dinesh Maniyam
---
test/cmd/Makefile | 1 +
test/cmd/i3c.c| 52
From: Dinesh Maniyam
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam
From: Dinesh Maniyam
Add new i3c driver to U-Boot drivers.
Signed-off-by: Dinesh Maniyam
---
MAINTAINERS | 7 +++
drivers/Kconfig | 2 ++
drivers/Makefile | 1 +
drivers/i3c/Kconfig | 16
drivers/i3c/Makefile | 3 +++
5 files changed, 29 insertions
From: Dinesh Maniyam
This patchset add Synopsys MIPI I3C Driver support for
Intel Agilex5 devices.
The i3c driver is leveraged from the master/dw-i3c-master.c,
i3c/device.c and i3c/master.c Linux version 6.6.37 LTS
And few header files included to be
part of the migration; i3c/internals.h
From: Dinesh Maniyam
Enable configs for i3c in agilex5.
Signed-off-by: Dinesh Maniyam
---
configs/socfpga_agilex5_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/socfpga_agilex5_defconfig
b/configs/socfpga_agilex5_defconfig
index 8577ac610c2..87febc9f4ce 100644
--- a
From: Dinesh Maniyam
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/i3c-uclass.c | 38
include/dw-i3c.h | 1 +
include/i3c.h
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the MIPI DWI3C driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/Kconfig | 5 +
drivers/i3c/Makefile| 1 +
drivers/i3c/master/Kconfig | 11 +++
drivers/i3c/master/Makefile | 3 +++
4 files changed, 20
From: Dinesh Maniyam
Add i3c general uclass id.
Signed-off-by: Dinesh Maniyam
---
include/dm/uclass-id.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 270088ad94f..1d259b439ff 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm
From: Dinesh Maniyam
Add s simple test for the I3C uclass in sandbox.
Signed-off-by: Dinesh Maniyam
---
arch/sandbox/dts/test.dts | 8 ++
drivers/i3c/Kconfig | 6 +
drivers/i3c/Makefile | 1 +
drivers/i3c/sandbox_i3c.c | 56 +++
test
From: Dinesh Maniyam
Picked linux i3c driver upstraming patch to fix the issue to
probe for i3c controller without slave device attached.
With this fix, the ret check will be on command error and will success
without slave device attached.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c
From: Dinesh Maniyam
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam
---
cmd/Kconfig| 6 +
cmd/Makefile | 1 +
cmd/i3c.c | 193
From: Dinesh Maniyam
Enable configs for sandbox i3c.
Signed-off-by: Dinesh Maniyam
---
configs/sandbox_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 861a1f4cd90..ba98cb0ae99 100644
--- a/configs/sandbox_defconfig
From: Dinesh Maniyam
Add i3c general uclass id.
Signed-off-by: Dinesh Maniyam
---
include/dm/uclass-id.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 270088ad94f..1d259b439ff 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm
From: Dinesh Maniyam
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/i3c-uclass.c | 38
include/dw-i3c.h | 1 +
include/i3c.h
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the MIPI DWI3C driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/Kconfig | 3 +++
drivers/i3c/Makefile| 1 +
drivers/i3c/master/Kconfig | 11 +++
drivers/i3c/master/Makefile | 3 +++
4 files changed, 18
From: Dinesh Maniyam
This patchset add Synopsys MIPI I3C Driver support for
Intel Agilex5 devices.
The i3c driver is leveraged from the master/dw-i3c-master.c,
i3c/device.c and i3c/master.c Linux version 6.6.37 LTS
And few header files included to be
part of the migration; i3c/internals.h
From: Dinesh Maniyam
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam
---
cmd/i3c.c | 193 +
doc/usage/cmd/i3c.rst | 98 +++
drivers/i3c
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the
DWI3C driver cmd support.
Signed-off-by: Dinesh Maniyam
---
cmd/Kconfig | 6 ++
cmd/Makefile | 1 +
2 files changed, 7 insertions(+)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 642cc1116e8..551959731f0 100644
--- a/cmd
From: Dinesh Maniyam
Add s simple test for the I3C uclass in sandbox.
Signed-off-by: Dinesh Maniyam
---
arch/sandbox/dts/test.dts | 8 ++
drivers/i3c/Kconfig | 6
drivers/i3c/Makefile | 1 +
drivers/i3c/sandbox_i3c.c | 58 +++
test/dm
From: Dinesh Maniyam
Add simple test to check i3c controller defined in sandbox test DT.
Basically, this test case will check validity of the i3c controller
by probing it and perform basic commands of cmd/i3c.c
Signed-off-by: Dinesh Maniyam
---
test/cmd/Makefile | 1 +
test/cmd/i3c.c| 52
From: Dinesh Maniyam
Picked linux i3c driver upstraming patch to fix the issue to
probe for i3c controller without slave device attached.
With this fix, the ret check will be on command error and will success
without slave device attached.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c
From: Dinesh Maniyam
Add new i3c driver to U-Boot drivers.
Signed-off-by: Dinesh Maniyam
---
drivers/Kconfig | 2 ++
drivers/Makefile | 1 +
drivers/i3c/Kconfig | 16
drivers/i3c/Makefile | 3 +++
4 files changed, 22 insertions(+)
create mode 100755 drivers/i3c
From: Dinesh Maniyam
Enable configs for sandbox i3c.
Signed-off-by: Dinesh Maniyam
---
configs/sandbox_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 861a1f4cd90..d3617da8792 100644
--- a/configs/sandbox_defconfig
From: Dinesh Maniyam
Enable configs for i3c in agilex5.
Signed-off-by: Dinesh Maniyam
---
configs/socfpga_agilex5_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/socfpga_agilex5_defconfig
b/configs/socfpga_agilex5_defconfig
index 8577ac610c2..5d380011fab 100644
--- a
From: Dinesh Maniyam
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam
From: Dinesh Maniyam
Add i3c general uclass id.
Signed-off-by: Dinesh Maniyam
---
include/dm/uclass-id.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 270088ad94f..1d259b439ff 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm
From: Dinesh Maniyam
Add new i3c driver to U-Boot drivers.
Signed-off-by: Dinesh Maniyam
---
MAINTAINERS | 7 +++
drivers/Kconfig | 2 ++
drivers/Makefile | 1 +
drivers/i3c/Kconfig | 16
drivers/i3c/Makefile | 3 +++
5 files changed, 29 insertions
From: Dinesh Maniyam
Add s simple test for the I3C uclass in sandbox.
Signed-off-by: Dinesh Maniyam
---
arch/sandbox/dts/test.dts | 8 ++
drivers/i3c/Kconfig | 6 +
drivers/i3c/Makefile | 1 +
drivers/i3c/sandbox_i3c.c | 56 +++
test
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the MIPI DWI3C driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/Kconfig | 5 +
drivers/i3c/Makefile| 1 +
drivers/i3c/master/Kconfig | 11 +++
drivers/i3c/master/Makefile | 3 +++
4 files changed, 20
From: Dinesh Maniyam
Picked linux i3c driver upstraming patch to fix the issue to
probe for i3c controller without slave device attached.
With this fix, the ret check will be on command error and will success
without slave device attached.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c
From: Dinesh Maniyam
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/i3c-uclass.c | 38
include/dw-i3c.h | 1 +
include/i3c.h
From: Dinesh Maniyam
This patchset add Synopsys MIPI I3C Driver support for
Intel Agilex5 devices.
The i3c driver is leveraged from the master/dw-i3c-master.c,
i3c/device.c and i3c/master.c Linux version 6.6.37 LTS
And few header files included to be
part of the migration; i3c/internals.h
From: Dinesh Maniyam
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam
---
cmd/Kconfig| 6 +
cmd/Makefile | 1 +
cmd/i3c.c | 193
From: Dinesh Maniyam
Enable configs for i3c in agilex5.
Signed-off-by: Dinesh Maniyam
---
configs/socfpga_agilex5_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/socfpga_agilex5_defconfig
b/configs/socfpga_agilex5_defconfig
index 8577ac610c2..87febc9f4ce 100644
--- a
From: Dinesh Maniyam
Enable configs for sandbox i3c.
Signed-off-by: Dinesh Maniyam
---
configs/sandbox_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 861a1f4cd90..ba98cb0ae99 100644
--- a/configs/sandbox_defconfig
From: Dinesh Maniyam
Add simple test to check i3c controller defined in sandbox test DT.
Basically, this test case will check validity of the i3c controller
by probing it and perform basic commands of cmd/i3c.c
Signed-off-by: Dinesh Maniyam
---
test/cmd/Makefile | 1 +
test/cmd/i3c.c| 52
From: Dinesh Maniyam
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/Makefile | 1 +
drivers/i3c/i3c-uclass.c | 38
include/dw-i3c.h
From: Dinesh Maniyam
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam
---
cmd/i3c.c | 193 +
drivers/i3c/master/dw-i3c-master.c | 35 +-
include/dw-i3c.h
From: Dinesh Maniyam
Enable I3C driver support.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/Kconfig | 21 +
drivers/i3c/Makefile | 3 +++
2 files changed, 24 insertions(+)
create mode 100644 drivers/i3c/Kconfig
create mode 100644 drivers/i3c/Makefile
diff --git a
From: Dinesh Maniyam
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the MIPI DWI3C driver.
Signed-off-by: Dinesh Maniyam
---
drivers/i3c/master/Kconfig | 11 +++
drivers/i3c/master/Makefile | 3 +++
2 files changed, 14 insertions(+)
create mode 100644 drivers/i3c/master/Kconfig
create mode
From: Dinesh Maniyam
Enable the Kconfig and Makefile for the
DWI3C driver cmd support.
Signed-off-by: Dinesh Maniyam
---
cmd/Kconfig | 6 ++
cmd/Makefile | 1 +
2 files changed, 7 insertions(+)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index a04fcaa0e0..5236e7ea76 100644
--- a/cmd/Kconfig
1 - 100 of 180 matches
Mail list logo
