From: Dinesh Maniyam <dinesh.mani...@altera.com>
Enable the Kconfig and Makefile for the MIPI DWI3C driver.
Signed-off-by: Dinesh Maniyam <dinesh.mani...@altera.com>
---
drivers/i3c/Kconfig | 5 +++++
drivers/i3c/Makefile | 1 +
drivers/i3c/master/Kconfig | 11 +++++++++++
drivers/i3c/master/Makefile | 3 +++
4 files changed, 20 insertions(+)
create mode 100644 drivers/i3c/master/Kconfig
create mode 100644 drivers/i3c/master/Makefile
diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
index fa68612787b..d4451057de0 100644
--- a/drivers/i3c/Kconfig
+++ b/drivers/i3c/Kconfig
@@ -14,3 +14,8 @@ menuconfig I3C
If you want I3C support, you should say Y here and also to the
specific driver for your bus adapter(s) below.
+if I3C
+
+source "drivers/i3c/master/Kconfig"
+
+endif # I3C
diff --git a/drivers/i3c/Makefile b/drivers/i3c/Makefile
index 5bb44a8d64f..5ddc4743c86 100644
--- a/drivers/i3c/Makefile
+++ b/drivers/i3c/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := i3c-uclass.o device.o master.o
+obj-y += master/
diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
new file mode 100644
index 00000000000..22bb7c21ea1
--- /dev/null
+++ b/drivers/i3c/master/Kconfig
@@ -0,0 +1,11 @@
+config DW_I3C_MASTER
+ tristate "Synospsys DesignWare I3C master driver"
+ depends on I3C
+ help
+ Support for Synopsys DesignWare MIPI I3C Controller.
+
+ For details please see
+ https://www.synopsys.com/dw/ipdir.php?ds=mipi_i3c
+
+ This driver can also be built as a module. If so, the module
+ will be called dw-i3c-master.
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
new file mode 100644
index 00000000000..c7562f1aa33
--- /dev/null
+++ b/drivers/i3c/master/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_DW_I3C_MASTER) += dw-i3c-master.o
--
2.35.3
