[PATCH] arm: dts: socfpga: stratix10: Add freeze controller node

[dinesh . maniyam]

From: Dinesh Maniyam <dinesh.mani...@intel.com>

The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.

Signed-off-by: Yau Wai Gan <yau.wai....@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.mani...@intel.com>
---
 arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi 
b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
index 61df425f14..75a29045da 100755
--- a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
+++ b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi
@@ -2,7 +2,7 @@
 /*
  * U-Boot additions
  *
- * Copyright (C) 2019-2020 Intel Corporation <www.intel.com>
+ * Copyright (C) 2019-2022 Intel Corporation <www.intel.com>
  */
 
 #include "socfpga_stratix10-u-boot.dtsi"
@@ -10,6 +10,15 @@
 /{
        aliases {
                spi0 = &qspi;
+               freeze_br0 = &freeze_controller;
+       };
+
+       soc {
+               freeze_controller: freeze_controller@f9000450 {
+                       compatible = "altr,freeze-bridge-controller";
+                       reg = <0xf9000450 0x00000010>;
+                       status = "disabled";
+               };
        };
 };
 
-- 
2.25.1