On Thu, Nov 3, 2022 at 11:44 PM Tim Harvey wrote:
>
> Fix a couple of typos:
> - s/Acquantia/Aquantia/
> - s/firmare/firmware/
>
> Signed-off-by: Tim Harvey
> ---
> drivers/net/phy/aquantia.c | 8
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/phy/aquanti
On Sat, Nov 5, 2022 at 6:24 AM Chris Packham wrote:
>
> Add support for the AlleyCat5 SoC. This lacks the mbus from the other
> users of the mvneta.c driver so a new compatible string is needed to
> allow for a different window configuration.
>
> Signed-off-by: Chris Packham
> Reviewed-by: Stefan
On Wed, Nov 9, 2022 at 4:26 AM Ying-Chun Liu (PaulLiu)
wrote:
>
>
>
> On 2022/11/9 05:03, Sean Anderson wrote:
> > On 11/8/22 01:17, Ying-Chun Liu (PaulLiu) wrote:
> >> From: "Ying-Chun Liu (PaulLiu)"
> >>
> >> This commit adds a simple wget command that can download files
> >> from http server.
On Tue, Nov 8, 2022 at 8:17 AM Ying-Chun Liu (PaulLiu)
wrote:
>
> From: "Ying-Chun Liu (PaulLiu)"
>
> Currently file transfers are done using tftp or NFS both
> over udp. This requires a request to be sent from client
> (u-boot) to the boot server.
>
> The current standard is TCP with selective a
Hi Ramon,
On 09.11.22 09:22, Ramon Fried wrote:
On Sat, Nov 5, 2022 at 6:24 AM Chris Packham wrote:
Add support for the AlleyCat5 SoC. This lacks the mbus from the other
users of the mvneta.c driver so a new compatible string is needed to
allow for a different window configuration.
Signed-of
On Tue, Nov 8, 2022 at 10:15 PM Simon Glass wrote:
>
> On Mon, 7 Nov 2022 at 23:17, Ying-Chun Liu (PaulLiu)
> wrote:
> >
> > From: "Ying-Chun Liu (PaulLiu)"
> >
> > Simulate a TCP HTTP server's response for testing wget command.
> >
> > Signed-off-by: Ying-Chun Liu (PaulLiu)
> > Cc: Christian G
On Tue, Nov 8, 2022 at 10:15 PM Simon Glass wrote:
>
> On Mon, 7 Nov 2022 at 23:17, Ying-Chun Liu (PaulLiu)
> wrote:
> >
> > From: "Ying-Chun Liu (PaulLiu)"
> >
> > Add documentation for the wget command.
> >
> > Signed-off-by: Ying-Chun Liu (PaulLiu)
> > Cc: Christian Gmeiner
> > Cc: Joe Hers
On 11/9/22 15:32, Macpaul Lin wrote:
On 11/9/22 10:07, Chunfeng Yun (云春峰) wrote:
On Tue, 2022-11-08 at 11:21 +0800, Macpaul Lin wrote:
From: Fabien Parent
The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73
and
a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device
Hi,
On 09.06.20 09:59, Ye Li wrote:
> i.MX platforms provide large AHB mapped space for QSPI, each
> controller has 256MB. However, current driver only maps small
> size (AHB buffer size) of AHB space, this implementation
> causes i.MX failed to boot M4 with QSPI XIP image.
>
> Add config CONFIG_
From: Fabien Parent
The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
and LPDDR4 options.
Signed-off-by: Fabien Parent
Signed-off-b
From: Fabien Parent
Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.
Signed-off-by: Fabien Parent
Signed-off-by: Amjad Ouled-Ameur
Signed-off-by: Macpaul Lin
---
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 1 +
arch/a
> From: Stefan Roese
> Subject: LX2106A U-Boot: board_eth_init() not called any more
>
> Dear NXP LX2160 developers!
>
Hi!
> With commit 94633c36f9eb ("net: Make DM_ETH be selected by NETDEVICE")
> DM_ETH is now mandatory. And net/eth_legacy.c is not compiled anymore.
> Resulting in board_eth_in
Hi.
Le mardi 8 novembre 2022, 21:15:12 CET Simon Glass a écrit :
> Hi,
>
> On Tue, 8 Nov 2022 at 08:21, Tom Rini wrote:
> > On Mon, Nov 07, 2022 at 08:28:42AM -0700, Simon Glass wrote:
> > > Hi Patrick,
> > >
> > > On Mon, 7 Nov 2022 at 05:32, Patrick DELAUNAY
> > >
> > > wrote:
> > > > Hi,
On Mon, Nov 07, 2022 at 07:20:48PM +, Abdellatif El Khlifi wrote:
> Add the core driver implementing Arm Firmware Framework for Armv8-A v1.0
>
> The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
> describes interfaces (ABIs) that standardize communication
> between the Secure
On Wed, 2022-11-09 at 17:33 +0800, Macpaul Lin wrote:
> On 11/9/22 15:32, Macpaul Lin wrote:
> >
> > On 11/9/22 10:07, Chunfeng Yun (云春峰) wrote:
> > > On Tue, 2022-11-08 at 11:21 +0800, Macpaul Lin wrote:
> > > > From: Fabien Parent
> > > >
> > > > The MediaTek MT8195 is a ARM64-based SoC with a
On Wed, 2022-11-09 at 17:50 +0800, Macpaul Lin wrote:
> From: Fabien Parent
>
> The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73
> and
> a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and
> hosts,
> SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LP
On Wed, Nov 09, 2022 at 12:48:59PM +0200, Ioana Ciornei wrote:
> > From: Stefan Roese
> > Subject: LX2106A U-Boot: board_eth_init() not called any more
> >
> > Dear NXP LX2160 developers!
> >
>
> Hi!
>
> > With commit 94633c36f9eb ("net: Make DM_ETH be selected by NETDEVICE")
> > DM_ETH is now m
Hi Ioana,
On 09.11.22 11:48, Ioana Ciornei wrote:
From: Stefan Roese
Subject: LX2106A U-Boot: board_eth_init() not called any more
Dear NXP LX2160 developers!
Hi!
With commit 94633c36f9eb ("net: Make DM_ETH be selected by NETDEVICE")
DM_ETH is now mandatory. And net/eth_legacy.c is not co
On Wed, Nov 09, 2022 at 12:37:24PM +0900, Masahisa Kojima wrote:
> eficonfig_select_file_handler() is commonly used to select the
> file. eficonfig_display_select_file_option() adds an additional
> menu to clear the selected file.
> eficonfig_display_select_file_option() is not always necessary
> f
On Wed, Nov 09, 2022 at 12:37:26PM +0900, Masahisa Kojima wrote:
> All the eficonfig menus other than "Change Boot Order"
> use 'eficonfig_entry' structure for each menu entry.
> This commit refactors change boot order implementation
> to use 'eficonfig_entry' structure same as other menus
> to hav
Hi all,
Ping on the patch series. I don't need it for my boards anymore but I
still think this is a nice to have for everybody. I won't ping again if
there's no interest/feedback.
Cheers,
Quentin
On 7/22/22 12:09, Quentin Schulz wrote:
From: Quentin Schulz
This makes sure regulators that
On Wed, Nov 09, 2022 at 02:29:56PM +0100, Stefan Roese wrote:
> Hi Ioana,
>
[snip]
> > fsl-mc: Booting Management Complex ... SUCCESS
> > fsl-mc: Management Complex booted (version: 10.24.0, boot status: 0x1)
> > Hit any key to stop autoboot: 0
> > => setenv ethact DPMAC3@usxgmii
> > => setenv
On Wed, Nov 09, 2022 at 08:24:27AM -0500, Tom Rini wrote:
> On Wed, Nov 09, 2022 at 12:48:59PM +0200, Ioana Ciornei wrote:
> > > From: Stefan Roese
> > > Subject: LX2106A U-Boot: board_eth_init() not called any more
> > >
[snip]
>
> I suspect there's unused code in the board directory that shou
Hi Simon,
On 11/8/22 00:28, Simon Glass wrote:
Convert the buildman documentation to rST format and include it in the
'build' section.
Signed-off-by: Simon Glass
---
[...]
+Other options
+-
+
+Buildman has various other command-line options. Try --help to see them.
+
+To find ou
Here's the latest report.
-- Forwarded message -
From:
Date: Mon, Nov 7, 2022 at 3:41 PM
Subject: New Defects reported by Coverity Scan for Das U-Boot
To:
Hi,
Please find the latest report on new defect(s) introduced to Das
U-Boot found with Coverity Scan.
21 new defect(s) in
Hi Fabio,
On 08.11.22 23:16, Fabio Estevam wrote:
Hi Oliver and Stefano,
On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic wrote:
I have tried to merge the series, but I get build errors, see:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
Could you take a look ?
One proble
Hi Simon,
On 11/8/22 00:28, Simon Glass wrote:
From: Tom Rini
Add a new flag to buildman so that we will in turn pass
BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.
Allow the settings file to control this.
Cc: Rasmus Villemoes
Cc: Simon Glass
Signed-off-by: Tom Rini
Signed
Hi Kojima-san
On Wed, Nov 09, 2022 at 12:37:27PM +0900, Masahisa Kojima wrote:
> This commit adds the menu-driven UEFI Secure Boot Key
> enrollment interface. User can enroll PK, KEK, db
> and dbx by selecting file.
> Only the signed EFI Signature List(s) with an authenticated
> header, typically
On 08/11/22, Fabio Estevam wrote:
> Hi Oliver and Stefano,
>
> On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic wrote:
>
> > I have tried to merge the series, but I get build errors, see:
> >
> > https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
> >
> > Could you take a look ?
>
> O
On 08/11/22, Stefano Babic wrote:
> Hi Fabio, Oliver,
>
> On 04.11.22 17:31, Fabio Estevam wrote:
> > Hi Oliver,
> >
> > On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
> > wrote:
> > >
> > > This patchsets switches the remaining imx8 boards to binman.
> > >
> > > Oliver Graute (8):
> > >imx
On Fri, 2022-11-04 at 13:31 -0300, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
> wrote:
> >
> > This patchsets switches the remaining imx8 boards to binman.
> >
> > Oliver Graute (8):
> > imx: imx8qm-rom7720: switch to binman
> > imx: imx8qm: cgtqmx8:
On 11/6/22 2:49 AM, Heinrich Schuchardt wrote:
On 11/1/22 15:06, Andrew Davis wrote:
On 10/7/22 6:47 PM, Heinrich Schuchardt wrote:
On 10/7/22 22:37, Andrew Davis wrote:
J721e needs DM firmware when using updated SYSFW. Add steps to fetch,
build, and deploy the same.
Signed-off-by: Andrew Dav
J721e needs DM firmware when using updated SYSFW. Add steps to fetch,
build, and deploy the same.
Signed-off-by: Andrew Davis
---
Changes from v2:
- s/DM/DM Firmware
Changes from v1:
- None
doc/board/ti/j721e_evm.rst | 16 ++--
1 file changed, 10 insertions(+), 6 deletions(-)
d
* BASH code should be labeled as such.
* Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt
Signed-off-by: Andrew Davis
---
Changes from v2:
- None
Changes from v1:
- New patch with fixes suggested by Heinrich
doc/board/ti/j721e_evm.rst | 24 ++
Hi Oliver and Stefano,
On Wed, Nov 9, 2022 at 1:19 PM Oliver Graute wrote:
> For my imx8qm boards I need to manually place these imx firmware blobs with
> expected names for sucessfull image creation.
>
> As I understood the CI creates somes fakes. But I don't know where this
> is happening.
CI
Hi Oliver
Thanks for working on this.
On Fri, 2022-11-04 at 16:03 +0100, Oliver Graute wrote:
> Switch to use binman to pack images
>
> Signed-off-by: Oliver Graute
> ---
> Changes for v2
> - use common imx8qm-u-boot.dtsi
> - guard SPL nodes with CONFIG_SPL
I don't think it is that simple. E
+ Tom
- all
On Wednesday 09 November 2022 15:10:59 Macpaul Lin wrote:
> On 11/8/22 15:57, Pali Rohár wrote:
> > Hello! I'm not mediatek maintainer and if this patch series is not
> > something important for me which should I review then please do not send
> > me lot of these emails... As I would h
On Wednesday 02 November 2022 01:08:26 Pali Rohár wrote:
> On Friday 21 October 2022 21:09:55 Pali Rohár wrote:
> > On Thursday 20 October 2022 22:06:58 Pali Rohár wrote:
> > > On Monday 10 October 2022 23:30:21 Sicelo wrote:
> > > > On Sun, Oct 09, 2022 at 09:33:17PM +0200, Pali Rohár wrote:
> > >
On Wed, Nov 09, 2022 at 09:09:28PM +0100, Pali Rohár wrote:
> + Tom
> - all
>
> On Wednesday 09 November 2022 15:10:59 Macpaul Lin wrote:
> > On 11/8/22 15:57, Pali Rohár wrote:
> > > Hello! I'm not mediatek maintainer and if this patch series is not
> > > something important for me which should I
This series attempts to tidy up the problem of missing blobs, making
U-Boot default to failing the build, but providing ways to configure this
so that buildman can still be used for build testing by people who don't
have the blobs or don't care about them.
This is based on discussion in [1] as wel
On Mon, 10 Oct 2022 at 16:33, Simon Glass wrote:
>
> Hi Michal,
>
> On Mon, 10 Oct 2022 at 15:33, Michal Suchánek wrote:
> >
> > On Mon, Oct 10, 2022 at 09:49:20PM +0200, Michal Suchánek wrote:
> > > On Sun, Oct 02, 2022 at 07:10:40PM -0600, Simon Glass wrote:
> > > > Hi Michal,
> > > >
> > > > O
Hi Quentin,
On Mon, 7 Nov 2022 at 07:17, Quentin Schulz
wrote:
>
> Hi Simon,
>
> On 11/6/22 00:04, Simon Glass wrote:
> > At present binman returns success when told to handle missing blobs.
> > This is confusing this in fact the resulting image cannot work.
> >
> > Use exit code 103 to signal th
Hi Quentin & Heinrich,
On Wed, 9 Nov 2022 at 09:03, Quentin Schulz
wrote:
>
> Hi Simon,
>
> On 11/8/22 00:28, Simon Glass wrote:
> > From: Tom Rini
> >
> > Add a new flag to buildman so that we will in turn pass
> > BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.
> >
> > Allow the
gcc 12 seems to warn on strncpy() as a matter of course. Rewrite the code
a different way to do the same thing, to avoid the warning.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/image.h | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/include/image.h
This currently uses if_changed on a phony target. Use a real file as the
target and add FORCE at the end, as required. Drop the 'inputs' phony
since it is not needed.
Signed-off-by: Simon Glass
---
(no changes since v2)
Changes in v2:
- Use a separate rule for running binman
Makefile | 11 +++
This is out-of-date now. Fix it.
Signed-off-by: Simon Glass
---
(no changes since v1)
scripts/Kbuild.include | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 9c14310ad40..62e0207f91b 100644
--- a/scripts/Kbuild.include
++
This script was removed about 6 years ago so most people should be aware
that it is not needed anymore. Drop mention of it.
Signed-off-by: Simon Glass
---
(no changes since v3)
Changes in v3:
- Add new patch to drop mention of MAKEALL
tools/buildman/buildman.rst | 110
At present binman returns success when told to handle missing/faked blobs
or missing bintools. This is confusing since in fact the resulting image
cannot work.
Use exit code 103 to signal this problem, with a -W option to convert
it to a warning.
Rename the flag to --ignore-missing since it contr
Hi Heinrich,
On Mon, 7 Nov 2022 at 16:35, Simon Glass wrote:
>
> Hi Heinrich,
>
> On Mon, 7 Nov 2022 at 12:15, Heinrich Schuchardt wrote:
> >
> > On 11/4/22 23:48, Simon Glass wrote:
> > > So far standard boot lacks a boot menu, although it is possible to create
> > > a rudimentary one using the
There is one on kernel.org but it does not build the hsdk_4xd board. Add
a link to one which does.
Signed-off-by: Simon Glass
---
(no changes since v4)
Changes in v4:
- Add a patch to update the arc toolchain
tools/buildman/buildman.rst | 5 -
1 file changed, 4 insertions(+), 1 deletion(-
The settings file omits a few lines which are useful for getting every
board building. Add these and update the documentation tool.
Signed-off-by: Simon Glass
---
(no changes since v4)
Changes in v4:
- Add new patch to update the default settings file
tools/buildman/bsettings.py | 3 +++
tool
Buildman should consider a build as a success (with warnings) if missing
blobs have been dealt with by binman, even though buildman itself returns
and error code overall. This is how other warnings are dealt with.
We cannot easily access the 103 exit code, so detect the problem in the
output.
Wit
Init this variable at the top level since it is a global.
Signed-off-by: Simon Glass
---
Changes in v5:
- Add new patch to ensure config_fname is inited
tools/buildman/bsettings.py | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/buildman/bsettings.py b/tools/buildman/bsettings.py
ind
Support for some architectures has been removed since buildman was first
written. Also all toolchains are now available at kernel.org so we don't
need the links, except for arc where the kernel.org toolchain fails to
build all boards.
Signed-off-by: Simon Glass
---
(no changes since v4)
Changes
These are documented in various several sections. Add a new section that
mentions them all in one place so it is easier to see what environment
variables can be used to control U-Boot's use of binman.
Signed-off-by: Simon Glass
Suggested-by: Heinrich Schuchardt
---
Changes in v5:
- Add new patc
From: Tom Rini
While it is possible and documented on how to re-run buildman to replace
faked required binary files after the fact, this behavior ends up being
more confusing than helpful in practice. Switch to requiring
BINMAN_ALLOW_MISSING=1 to be passed on the 'make' line to enable this
behavi
This was dropped my mistake. Reinstate it.
Signed-off-by: Simon Glass
Fixes: d829f1217c6 ("bulidman: Add support for a simple build")
---
Changes in v5:
- Add new patch to reinstate removal of temp output dir in tests
tools/buildman/func_test.py | 2 +-
1 file changed, 1 insertion(+), 1 deleti
Add command-line documentation for binman.
Signed-off-by: Simon Glass
---
Changes in v5:
- Add new patch with documentation for the command line args
tools/binman/binman.rst | 300 +++-
1 file changed, 299 insertions(+), 1 deletion(-)
diff --git a/tools/bin
From: Tom Rini
Add a new flag to buildman so that we will in turn pass
BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.
Allow the settings file to control this.
Cc: Rasmus Villemoes
Cc: Simon Glass
Signed-off-by: Tom Rini
Signed-off-by: Simon Glass
---
Changes in v5:
- Split
Hi Ilias,
On Thu, 10 Nov 2022 at 01:04, Ilias Apalodimas
wrote:
>
> Hi Kojima-san
>
>
> On Wed, Nov 09, 2022 at 12:37:27PM +0900, Masahisa Kojima wrote:
> > This commit adds the menu-driven UEFI Secure Boot Key
> > enrollment interface. User can enroll PK, KEK, db
> > and dbx by selecting file.
>
Convert the buildman documentation to rST format and include it in the
'build' section.
Signed-off-by: Simon Glass
Reviewed-by: Quentin Schulz
---
Changes in v5:
- Correct --- Warning --- section
- Convert the buildman args to a list
Changes in v3:
- Add new patch to convert documentation to r
[...]
> > > + goto out;
> > > +
> > > + ret = efi_open_volume_int(file_info.current_volume, &root);
> > > + if (ret != EFI_SUCCESS)
> > > + goto out;
> > > +
> > > + ret = efi_file_open_int(root, &f, file_info.current_path,
> > > EFI_FILE_MODE_READ, 0);
> > > +
On Thu, 10 Nov 2022 at 15:47, Ilias Apalodimas
wrote:
>
> [...]
>
> > > > + goto out;
> > > > +
> > > > + ret = efi_open_volume_int(file_info.current_volume, &root);
> > > > + if (ret != EFI_SUCCESS)
> > > > + goto out;
> > > > +
> > > > + ret = efi_file_open_in
From: Fabien Parent
Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.
Signed-off-by: Fabien Parent
Signed-off-by: Amjad Ouled-Ameur
Signed-off-by: Macpaul Lin
---
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 1 +
arch/a
From: Fabien Parent
The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
and LPDDR4 options.
Signed-off-by: Fabien Parent
Signed-off-b
If the va_list we got handed over contains no protocols we must return
EFI_INVALID_PARAMETER. However in that case the current code just returns
an unintialized value.
Addresses-Coverity: CID 376195: ("Uninitialized variables (UNINIT)")
---
lib/efi_loader/efi_boottime.c | 4 ++--
1 file change
Invoking lseek() may result in an error. Handle it.
Addresses-Coverity-ID: 376212 ("Error handling issues (CHECKED_RETURN)")
Signed-off-by: Heinrich Schuchardt
---
drivers/usb/emul/sandbox_flash.c | 10 +++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/emul/sa
> From: U-Boot On Behalf Of Yu Chien Peter Lin
> Sent: Saturday, November 05, 2022 2:02 PM
> To: u-boot@lists.denx.de
> Cc: sam...@sholland.org; Peter Yu-Chien Lin(林宇謙)
> Subject: [PATCH v2] riscv: Fix detecting FPU support in standard extension
>
> We should check the string until it hits unders
68 matches
Mail list logo
