On Wed, Nov 09, 2022 at 02:29:56PM +0100, Stefan Roese wrote: > Hi Ioana, >
[snip] > > fsl-mc: Booting Management Complex ... SUCCESS > > fsl-mc: Management Complex booted (version: 10.24.0, boot status: 0x1) > > Hit any key to stop autoboot: 0 > > => setenv ethact DPMAC3@usxgmii > > => setenv ipaddr 10.0.0.1 > > => ping 10.0.0.2 > > DPMAC3@usxgmii Waiting for PHY auto negotiation to complete.Using > > DPMAC3@usxgmii device > > host 10.0.0.2 is alive > > Great. Many thanks for this testing this. I need to check what needs to > be done on our custom LX2160 based board in the dts/dtsi files and > corresponding drivers to fully support operation with DM_ETH enabled > now. > Mainly you would need to populate the dpmacX DTS nodes corresponding to the interfaces enabled in your RCW setup and any PHY which they are using. The 'fsl-lx2160a-rdb.dts' can be a reference for your board. > BTW: You might want to send a patch removing the now obsolete > board_eth_init() functions in board/freescale/*. > Yes, I should do that since it's removed for good now. Ioana
